Grey-Box Bayesian Optimization for ISAC in Fluid-Antenna Assisted Air-Ground Network

Fluid antenna systems (FAS) provide extra position agile spatial diversity for integrated sensing and communication (ISAC), by jointly optimizing the port selection and precoding. However, this optimization is challenging in air ground networks due to the intricate dual objective Pareto frontier, complex self-interference, and prohibitive channel state information overhead. To overcome these bottlenecks, this work proposes a novel grey box multi objective Bayesian optimization framework to address the joint design of discrete port selection and ISAC precoding. Unlike black box methods, this architecture explicitly leverages known physical system models to learn unknown channel constituents, dramatically reducing sample complexity. To navigate high dimensional combinatorial spaces, an adaptive trust region mechanism powered by expected hypervolume improvement (EHI) acquisition is implemented. Furthermore, the framework incorporates a spatio-temporal tracking strategy to handle the continuous mobility of users and targets, robustly capturing the drifting optimum in time varying environments. Simulations demonstrate that this framework achieves significantly faster convergence and discovers superior Pareto optimal configurations, validating its efficiency for dynamic real time FAS-ISAC deployments.

Test-Time Adaptation for Height Completion via Self-Supervised ViT Features and Monocular Foundation Models

Accurate digital surface models (DSMs) are essential for many geospatial applications, including urban monitoring, environmental analyses, infrastructure management, and change detection. However, large-scale DSMs frequently contain incomplete or outdated regions due to acquisition limitations, reconstruction artifacts, or changes in the built environment. Traditional height completion approaches primarily rely on spatial interpolation or which assume spatial continuity and therefore fail when objects are missing. Recent learning-based approaches improve reconstruction quality but typically require supervised training on sensor-specific datasets, limiting their generalization across domains and sensing conditions. We propose Prior2DSM, a training-free framework for metric DSM completion that operates entirely at test time by leveraging foundation models. Unlike previous height completion approaches that require task-specific training, the proposed method combines self-supervised Vision Transformer (ViT) features from DINOv3 with monocular depth foundation models to propagate metric information from incomplete height priors through semantic feature-space correspondence. Test-time adaptation (TTA) is performed using parameter-efficient low-rank adaptation (LoRA) together with a lightweight multilayer perceptron (MLP), which predicts spatially varying scale and shift parameters to convert relative depth estimates into metric heights. Experiments demonstrate consistent improvements over interpolation based methods, prior-based rescaling height approaches, and state-of-the-art monocular depth estimation models. Prior2DSM reduces reconstruction error while preserving structural fidelity, achieving up to a 46% reduction in RMSE compared to linear fitting of MDE, and further enables DSM updating and coupled RGB-DSM generation.

SenseMath: Do LLMs Have Number Sense? Evaluating Shortcut Use, Judgment, and Generation

Large language models often default to step-by-step computation even when efficient numerical shortcuts are available. This raises a basic question: do they exhibit number sense in a human-like behavioral sense, i.e., the ability to recognize numerical structure, apply shortcuts when appropriate, and avoid them when they are not? We introduce SenseMath, a controlled benchmark for evaluating structure-sensitive numerical reasoning in LLMs. SenseMath contains 4,800 items spanning eight shortcut categories and four digit scales, with matched strong-shortcut, weak-shortcut, and control variants. It supports three evaluation settings of increasing cognitive demand: Shortcut Use (whether models can apply shortcuts on shortcut-amenable problems); Applicability Judgment (whether they can recognize when a shortcut is appropriate or misleading); and Problem Generation (whether they can generate new problem items that correctly admit a given type of shortcut). Our evaluation across five LLMs, ranging from GPT-4o-mini to Llama-3.1-8B, shows a consistent pattern: when explicitly prompted, models readily adopt shortcut strategies and achieve substantial accuracy gains on shortcut-amenable items (up to 15%), yet under standard chain-of-thought prompting they spontaneously employ such strategies in fewer than 40% of cases, even when they demonstrably possess the requisite capability. Moreover, this competence is confined to the Use level; models systematically over-generalise shortcuts to problems where they do not apply, and fail to generate valid shortcut-bearing problems from scratch. Together, these results suggest that current LLMs exhibit procedural shortcut fluency without the structural understanding of when and why shortcuts work that underlies human number sense.

Causal Scene Narration with Runtime Safety Supervision for Vision-Language-Action Driving

Vision-Language-Action (VLA) models for autonomous driving must integrate diverse textual inputs, including navigation commands, hazard warnings, and traffic state descriptions, yet current systems often present these as disconnected fragments, forcing the model to discover on its own which environmental constraints are relevant to the current maneuver. We introduce Causal Scene Narration (CSN), which restructures VLA text inputs through intent-constraint alignment, quantitative grounding, and structured separation, at inference time with zero GPU cost. We complement CSN with Simplex-based runtime safety supervision and training-time alignment via Plackett-Luce DPO with negative log-likelihood (NLL) regularization. A multi-town closed-loop CARLA evaluation shows that CSN improves Driving Score by +31.1% on original LMDrive and +24.5% on the preference-aligned variant. A controlled ablation reveals that causal structure accounts for 39.1% of this gain, with the remainder attributable to information content alone. A perception noise ablation confirms that CSN's benefit is robust to realistic sensing errors. Semantic safety supervision improves Infraction Score, while reactive Time-To-Collision monitoring degrades performance, demonstrating that intent-aware monitoring is needed for VLA systems.

Decouple and Rectify: Semantics-Preserving Structural Enhancement for Open-Vocabulary Remote Sensing Segmentation

Open-vocabulary semantic segmentation in the remote sensing (RS) field requires both language-aligned recognition and fine-grained spatial delineation. Although CLIP offers robust semantic generalization, its global-aligned visual representations inherently struggle to capture structural details. Recent methods attempt to compensate for this by introducing RS-pretrained DINO features. However, these methods treat CLIP representations as a monolithic semantic space and cannot localize where structural enhancement is required, failing to effectively delineate boundaries while risking the disruption of CLIP's semantic integrity. To address this limitation, we propose DR-Seg, a novel decouple-and-rectify framework in this paper. Our method is motivated by the key observation that CLIP feature channels exhibit distinct functional heterogeneity rather than forming a uniform semantic space. Building on this insight, DR-Seg decouples CLIP features into semantics-dominated and structure-dominated subspaces, enabling targeted structural enhancement by DINO without distorting language-aligned semantics. Subsequently, a prior-driven graph rectification module injects high-fidelity structural priors under DINO guidance to form a refined branch, while an uncertainty-guided adaptive fusion module dynamically integrates this refined branch with the original CLIP branch for final prediction. Comprehensive experiments across eight benchmarks demonstrate that DR-Seg establishes a new state-of-the-art.

Evaluation of gNB Monostatic Sensing for UAV Use Case

3GPP Release 19 has initiated the standardization of integrated sensing and communications (ISAC), including a channel model for monostatic sensing, evaluation scenarios, and performance assessment methodologies. These common assumptions provide an important basis for ISAC evaluation, but reproducible end-to-end studies still require a transparent sensing implementation. This paper evaluates 5G New Radio (NR) base station (gNB)-based monostatic sensing for the Unmanned Aerial Vehicle (UAV) use case using a 5G NR downlink Cyclic Prefix-Orthogonal Frequency Division Multiplexing (CP-OFDM) waveform and positioning reference signals (PRS), following 3GPP Urban Macro-Aerial Vehicle (UMa-AV) scenario assumptions. We present an end-to-end processing chain for multi-target detection and 3D localization, achieving more than 70% detection probability with less than 5% false alarm rate, in the considered scenario. For correctly detected targets, localization errors are on the order of a few meters, with a 90th-percentile error of 4m and 6m in the vertical and horizontal directions, respectively. To support reproducible baseline studies and further research, we release the simulator 5GNRad, which reproduces our evaluation

Cross-Modal Visuo-Tactile Object Perception

Estimating physical properties is critical for safe and efficient autonomous robotic manipulation, particularly during contact-rich interactions. In such settings, vision and tactile sensing provide complementary information about object geometry, pose, inertia, stiffness, and contact dynamics, such as stick-slip behavior. However, these properties are only indirectly observable and cannot always be modeled precisely (e.g., deformation in non-rigid objects coupled with nonlinear contact friction), making the estimation problem inherently complex and requiring sustained exploitation of visuo-tactile sensory information during action. Existing visuo-tactile perception frameworks have primarily emphasized forceful sensor fusion or static cross-modal alignment, with limited consideration of how uncertainty and beliefs about object properties evolve over time. Inspired by human multi-sensory perception and active inference, we propose the Cross-Modal Latent Filter (CMLF) to learn a structured, causal latent state-space of physical object properties. CMLF supports bidirectional transfer of cross-modal priors between vision and touch and integrates sensory evidence through a Bayesian inference process that evolves over time. Real-world robotic experiments demonstrate that CMLF improves the efficiency and robustness of latent physical properties estimation under uncertainty compared to baseline approaches. Beyond performance gains, the model exhibits perceptual coupling phenomena analogous to those observed in humans, including susceptibility to cross-modal illusions and similar trajectories in learning cross-sensory associations. Together, these results constitutes a significant step toward generalizable, robust and physically consistent cross-modal integration for robotic multi-sensory perception.

Diff-KD: Diffusion-based Knowledge Distillation for Collaborative Perception under Corruptions

Multi-agent collaborative perception enables autonomous systems to overcome individual sensing limits through collective intelligence. However, real-world sensor and communication corruptions severely undermine this advantage. Crucially, existing approaches treat corruptions as static perturbations or passively conform to corrupted inputs, failing to actively recover the underlying clean semantics. To address this limitation, we introduce Diff-KD, a framework that integrates diffusion-based generative refinement into teacher-student knowledge distillation for robust collaborative perception. Diff-KD features two core components: (i) Progressive Knowledge Distillation (PKD), which treats local feature restoration as a conditional diffusion process to recover global semantics from corrupted observations; and (ii) Adaptive Gated Fusion (AGF), which dynamically weights neighbors based on ego reliability during fusion. Evaluated on OPV2V and DAIR-V2X under seven corruption types, Diff-KD achieves state-of-the-art performance in both detection accuracy and calibration robustness.

ProVG: Progressive Visual Grounding via Language Decoupling for Remote Sensing Imagery

Remote sensing visual grounding (RSVG) aims to localize objects in remote sensing imagery according to natural language expressions. Previous methods typically rely on sentence-level vision-language alignment, which struggles to exploit fine-grained linguistic cues, such as \textit{spatial relations} and \textit{object attributes}, that are crucial for distinguishing objects with similar characteristics. Importantly, these cues play distinct roles across different grounding stages and should be leveraged accordingly to provide more explicit guidance. In this work, we propose \textbf{ProVG}, a novel RSVG framework that improves localization accuracy by decoupling language expressions into global context, spatial relations, and object attributes. To integrate these linguistic cues, ProVG employs a simple yet effective progressive cross-modal modulator, which dynamically modulates visual attention through a \textit{survey-locate-verify} scheme, enabling coarse-to-fine vision-language alignment. In addition, ProVG incorporates a cross-scale fusion module to mitigate the large-scale variations in remote sensing imagery, along with a language-guided calibration decoder to refine cross-modal alignment during prediction. A unified multi-task head further enables ProVG to support both referring expression comprehension and segmentation tasks. Extensive experiments on two benchmarks, \textit{i.e.}, RRSIS-D and RISBench, demonstrate that ProVG consistently outperforms existing methods, achieving new state-of-the-art performance.

Graph Neural Operator Towards Edge Deployability and Portability for Sparse-to-Dense, Real-Time Virtual Sensing on Irregular Grids

Accurate sensing of spatially distributed physical fields typically requires dense instrumentation, which is often infeasible in real-world systems due to cost, accessibility, and environmental constraints. Physics-based solvers address this through direct numerical integration of governing equations, but their computational latency and power requirements preclude real-time use in resource-constrained monitoring and control systems. Here we introduce VIRSO (Virtual Irregular Real-Time Sparse Operator), a graph-based neural operator for sparse-to-dense reconstruction on irregular geometries, and a variable-connectivity algorithm, Variable KNN (V-KNN), for mesh-informed graph construction. Unlike prior neural operators that treat hardware deployability as secondary, VIRSO reframes inference as measurement: the combination of both spectral and spatial analysis provides accurate reconstruction without the high latency and power consumption of previous graph-based methodologies with poor scalability, presenting VIRSO as a potential candidate for edge-constrained, real-time virtual sensing. We evaluate VIRSO on three nuclear thermal-hydraulic benchmarks of increasing geometric and multiphysics complexity, across reconstruction ratios from 47:1 to 156:1. VIRSO achieves mean relative $L_2$ errors below 1%, outperforming other benchmark operators while using fewer parameters. The full 10-layer configuration reduces the energy-delay product (EDP) from ${\approx}206$ J$\cdot$ms for the graph operator baseline to $10.1$ J$\cdot$ms on an NVIDIA H200. Implemented on an NVIDIA Jetson Orin Nano, all configurations of VIRSO provide sub-10 W power consumption and sub-second latency. These results establish the edge-feasibility and hardware-portability of VIRSO and present compute-aware operator learning as a new paradigm for real-time sensing in inaccessible and resource-constrained environments.