Rate-Splitting Multiple Access for Transmissive Reconfigurable Intelligent Surface Transceiver Empowered ISAC System

In this paper, a novel transmissive reconfigurable intelligent surface (TRIS) transceiver empowered integrated sensing and communications (ISAC) system is proposed for future multi-demand terminals. To address interference management, we implement rate-splitting multiple access (RSMA), where the common stream is independently designed for the sensing service. We introduce the sensing quality of service (QoS) criteria based on this structure and construct an optimization problem with the sensing QoS criteria as the objective function to optimize the sensing stream precoding matrix and the communication stream precoding matrix. Due to the coupling of optimization variables, the formulated problem is a non-convex optimization problem that cannot be solved directly. To tackle the above-mentioned challenging problem, alternating optimization (AO) is utilized to decouple the optimization variables. Specifically, the problem is decoupled into three subproblems about the sensing stream precoding matrix, the communication stream precoding matrix, and the auxiliary variables, which is solved alternatively through AO until the convergence is reached. For solving the problem, successive convex approximation (SCA) is applied to deal with the sum-rate threshold constraints on communications, and difference-of-convex (DC) programming is utilized to solve rank-one non-convex constraints. Numerical simulation results verify the superiority of the proposed scheme in terms of improving the communication and sensing QoS.

Antenna Positioning and Beamforming Design for Movable-Antenna Enabled Multi-user Downlink Communications

This paper investigates a multiple input single output (MISO) downlink communication system in which users are equipped with movable antennas (MAs). First, We adopt a field-response based channel model to characterize the downlink channel with respect to MAs' positions. Then, we aim to minimize the total transmit power by jointly optimizing the MAs' positions and beamforming matrix. To solve the resulting non-convex problem, we employ an alternating optimization (AO) algorithm based on penalty method and successive convex approximation (SCA) to obtain a sub-optimal solution. Numerical results demonstrate that the MA-enabled communication system perform better than conventional fixed position antennas.

Reconfigurable Intelligent Surface Aided Space Shift Keying With Imperfect CSI

In this paper, we investigate the performance of reconfigurable intelligent surface (RIS)-aided spatial shift keying (SSK) wireless communication systems in the presence of imperfect channel state information (CSI). Specifically, we analyze the average bit error probability (ABEP) of two RIS-SSK systems respectively based on intelligent reflection and blind reflection of RIS. For the intelligent RIS-SSK scheme, we first derive the conditional pairwise error probability of the composite channel through maximum likelihood (ML) detection. Subsequently, we derive the probability density function of the combined channel. Due to the intricacies of the composite channel formulation, an exact closed-form ABEP expression is unattainable through direct derivation. To this end, we resort to employing the Gaussian-Chebyshev quadrature method to estimate the results. In addition, we employ the Q-function approximation to derive the non-exact closed-form expression when CSI imperfections are present. For the blind RIS-SSK scheme, we derive both closed-form ABEP expression and asymptotic ABEP expression with imperfect CSI by adopting the ML detector. To offer deeper insights, we explore the impact of discrete reflection phase shifts on the performance of the RIS-SSK system. Lastly, we extensively validate all the analytical derivations using Monte Carlo simulations.

On the Performance of RIS-Aided Spatial Scattering Modulation for mmWave Transmission

In this paper, we investigate a state-of-the-art reconfigurable intelligent surface (RIS)-assisted spatial scattering modulation (SSM) scheme for millimeter-wave (mmWave) systems, where a more practical scenario that the RIS is near the transmitter while the receiver is far from RIS is considered. To this end, the line-of-sight (LoS) and non-LoS links are utilized in the transmitter-RIS and RIS-receiver channels, respectively. By employing the maximum likelihood detector at the receiver, the conditional pairwise error probability (CPEP) expression for the RIS-SSM scheme is derived under the two scenarios that the received beam demodulation is correct or not. Furthermore, the union upper bound of average bit error probability (ABEP) is obtained based on the CPEP expression. Finally, the derivation results are exhaustively validated by the Monte Carlo simulations.

RIS-Aided Spatial Scattering Modulation for mmWave MIMO Transmissions

This paper investigates the reconfigurable intelligent surface (RIS) assisted spatial scattering modulation (SSM) scheme for millimeter-wave (mmWave) multiple-input multiple-output (MIMO) systems, in which line-of-sight (LoS) and non-line-of-sight (NLoS) paths are respectively considered in the transmitter-RIS and RIS-receiver channels. Based on the maximum likelihood detector, the conditional pairwise error probability (CPEP) expression for the RIS-SSM scheme is derived under the two cases of received beam correct and demodulation error. Furthermore, we derive the closed-form expressions of the unconditional pairwise error probability (UPEP) by employing two different methods: the probability density function and the moment-generating function expressions with a descending order of scatterer gains. To provide more useful insights, we derive the asymptotic UPEP and the diversity gain of the RIS-SSM scheme in the high SNR region. Depending on UPEP and the corresponding Euclidean distance, we get the union upper bound of the average bit error probability (ABEP). A new framework for ergodic capacity analysis is also provided to acquire the proposed system's effective capacity. Finally, all derivation results are validated via extensive Monte Carlo simulations, revealing that the proposed RIS-SSM scheme outperforms the benchmarks in terms of reliability.

Robust Weighted Sum-Rate Maximization for Transmissive RIS Transmitter Enabled RSMA Networks

Due to the low power consumption and low cost nature of transmissive reconfigurable intelligent surface (RIS),in this paper, we propose a downlink multi-user rate-splitting multiple access (RSMA) architecture based on the transmissive RIS transmitter, where the channel state information (CSI) is only accquired partially. We investigate the weighted sum-rate maximization problem by jointly optimizing the power, RIS transmissive coefficients and common rate allocated to each user. Due to the coupling of optimization variables, the problem is nonconvex, and it is difficult to directly obtain the optimal solution. Hence, a block coordinate descent (BCD) algorithm based on sample average approximation (SAA) and weighted minimum mean square error (WMMSE) is proposed to tackle it. Numerical results illustrate that the transmissive RIS transmitter with ratesplitting architecture has advantages over conventional space division multiple access (SDMA) and non-orthgonal multiple access (NOMA).

Intelligent Omni Surfaces assisted Integrated Multi Target Sensing and Multi User MIMO Communications

Drawing inspiration from the advantages of intelligent reflecting surfaces (IRS) in wireless networks,this paper presents a novel design for intelligent omni surface (IOS) enabled integrated sensing and communications (ISAC). By harnessing the power of multi antennas and a multitude of elements, the dual-function base station (BS) and IOS collaborate to realize joint active and passive beamforming, enabling seamless 360-degree ISAC coverage. The objective is to maximize the minimum signal-tointerference-plus-noise ratio (SINR) of multi-target sensing, while ensuring the multi-user multi-stream communications. To achieve this, a comprehensive optimization approach is employed, encompassing the design of radar receive vector, transmit beamforming matrix, and IOS transmissive and reflective coefficients. Due to the non-convex nature of the formulated problem, an auxiliary variable is introduced to transform it into a more tractable form. Consequently, the problem is decomposed into three subproblems based on the block coordinate descent algorithm. Semidefinite relaxation and successive convex approximation methods are leveraged to convert the sub-problem into a convex problem, while the iterative rank minimization algorithm and penalty function method ensure the equivalence. Furthermore,the scenario is extended to mode switching and time switching protocols. Simulation results validate the convergence and superior performance of the proposed algorithm compared to other benchmark algorithms.

Transmissive Reconfigurable Intelligent Surface Transmitter Empowered Cognitive RSMA Networks

In this paper, we investigated the downlink transmission problem of a cognitive radio network (CRN) equipped with a novel transmissive reconfigurable intelligent surface (TRIS) transmitter. In order to achieve low power consumption and high-rate multi-streams communication, time-modulated arrays (TMA) is implemented and users access the network using rate splitting multiple access (RSMA). With such a network framework, a multi-objective optimization problem with joint design of the precoding matrix and the common stream rate is constructed to achieve higher energy efficiency (EE) and spectral efficiency (SE). Since the objective function is a non-convex fractional function, we proposed a joint optimization algorithm based on difference-of-convex (DC) programming and successive convex approximation (SCA). Numerical results show that under this framework the proposed algorithm can considerably improve and balance the EE and SE.

Quadrature Spatial Scattering Modulation for mmWave Transmission

In this letter, we investigate a novel quadrature spatial scattering modulation (QSSM) transmission technique based on millimeter wave (mmWave) systems, in which the transmitter generates two orthogonal beams targeting candidate scatterers in the channel to carry the real and imaginary parts of the conventional signal, respectively. Meanwhile, the maximum likelihood (ML) detector is adopted at the receiver to recover the received beams and signals. Based on the ML detector, we derive the closed-form average bit error probability (ABEP) expression of the QSSM scheme. Furthermore, we evaluate the asymptotic ABEP expression of the proposed scheme. Monte Carlo simulations verify the exactness and tightness of the derivation results. It is shown that the ABEP performance of QSSM is better than that of traditional spatial scattering modulation.

Robust Sum-Rate Maximization in Transmissive RMS Transceiver-Enabled SWIPT Networks

In this paper, we propose a state-of-the-art downlink communication transceiver design for transmissive reconfigurable metasurface (RMS)-enabled simultaneous wireless information and power transfer (SWIPT) networks. Specifically, a feed antenna is deployed in the transmissive RMS-based transceiver, which can be used to implement beamforming. According to the relationship between wavelength and propagation distance, the spatial propagation models of plane and spherical waves are built. Then, in the case of imperfect channel state information (CSI), we formulate a robust system sum-rate maximization problem that jointly optimizes RMS transmissive coefficient, transmit power allocation, and power splitting ratio design while taking account of the non-linear energy harvesting model and outage probability criterion. Since the coupling of optimization variables, the whole optimization problem is non-convex and cannot be solved directly. Therefore, the alternating optimization (AO) framework is implemented to decompose the non-convex original problem. In detail, the whole problem is divided into three sub-problems to solve. For the non-convexity of the objective function, successive convex approximation (SCA) is used to transform it, and penalty function method and difference-of-convex (DC) programming are applied to deal with the non-convex constraints. Finally, we alternately solve the three sub-problems until the entire optimization problem converges. Numerical results show that our proposed algorithm has convergence and better performance than other benchmark algorithms.