Tracking the dynamics of non-canonical biological systems in microscopy videos remains a persistent challenge. Both classical and learning-based trackers depend on expert-reviewed data to be evaluated and adapted, yet exhaustive manual annotation rarely scales to the videos where these tools are needed most. We developed RIPPLE (Refinement Interpolation Platform for Point Location Estimation), which recasts annotation as sparse correction: a user clicks a starting point, RIPPLE proposes a full trajectory, and the user intervenes only where the trajectory drifts. We tested RIPPLE on five challenging microscopy datasets from our laboratories, four from the transparent jellyfish Clytia hemisphaerica and one tracking landmarks on rapidly moving sperm. Across these, RIPPLE matched the quality of exhaustive manual annotation while reducing manual clicks by 3 to 25 times across datasets. RIPPLE thereby fills a missing layer between manual annotation and fully automated tracking, enabling immediate quantification of biological dynamics, method benchmarking, and the production of the gold-standard data needed to adapt future automated microscopy trackers.
Recent aerial vision-language-action (VLA) models show promising single-UAV capabilities, such as tracking moving objects and navigating to language-specified landmarks. However, it remains unclear whether these capabilities can transfer to air-ground cooperation, where a UAV and a UGV must act jointly in a shared, closed-loop physical world. We study this question with CARLA-Air, a single-process air-ground evaluation environment that unifies CARLA and AirSim inside one Unreal Engine runtime. By sharing the same world state, physics tick, and sensing pipeline, CARLA-Air enables physically consistent UAV--UGV interaction and precise measurement of simulation-timestamp alignment and effective coordination latency. Using CARLA-Air, we evaluate representative aerial VLA and planning baselines on two complementary diagnostic tasks: moving-platform landing and occlusion-recovery escort. The results show that current aerial VLA models can often track or follow a ground partner, but struggle to convert this single-agent competence into stable cooperative behavior. State prompting provides limited benefit, and naive bidirectional interaction fails to consistently improve performance and can amplify errors for most baselines. These findings suggest that, under the tested text-based cue interfaces, zero-shot cooperative air-ground VLA requires three components beyond the current paradigm: explicit partner-state grounding, low-latency action coordination, and team-level objective alignment. Our code is available at https://github.com/louiszengCN/CarlaAir.
In safety-critical robotics applications, guaranteed and practical uncertainty quantification (UQ) in perception is vital. Many existing works either offer no formal containment guarantee, rely on restrictive modeling assumptions, or focus only on pose estimation rather than a complete SLAM pipeline. This paper presents provably guaranteed UQ algorithms for 3D-3D landmark-based SLAM. The algorithms consist of three basic UQ modules: forward UQ for mapping, backward UQ for pose tracking, and pose compound. Each module produces a certified uncertainty set; when the input uncertainty bounds are deterministic, the output sets inherit deterministic guarantees, i.e., they provably contain the true poses and landmarks. Specifically, we use polytopes to represent uncertainty sets, enabling tractable computations and a unified treatment of pose uncertainty. To enhance algorithms' practical usability, we incorporate conformal prediction to calibrate measurement uncertainty from data with prescribed probability. Simulations and experiments demonstrate that the proposed algorithms provide both strong theoretical guarantees and practical usability. The code is open-sourced at https://github.com/LIAS-CUHKSZ/Polytopic-SLAM-Uncertainty-Quantification.
Touchless interaction with medical images is becoming increasingly important in the surgical field, where sterility and continuity of the operational workflow are essential requirements. This work presents a vision-based system for intraoperative navigation of medical images through hand gestures acquired using a single RGB camera. Unlike many existing solutions, the system does not require additional hardware or user-specific training. Hand tracking is performed in real time using MediaPipe Hands, which provides a 2.5D estimation of hand landmarks. Simple and intuitive gestures are then mapped into translation, rotation, and zoom commands, enabling continuous and natural interaction with the image viewer. The system architecture is independent from the visualization software and, for implementation simplicity, in this study it was integrated with PyVista. Performance was evaluated through frame-level logging and quantitative analysis of latency, stability, and interaction robustness metrics. Experimental results highlight real-time behavior, with reduced latencies and stable control, in line with the requirements of fluid interaction. The system demonstrates the feasibility of a low-cost touchless solution for intraoperative access to medical images, laying the groundwork for future clinical evaluations.
Vision-Language Navigation(VLN) requires an agent to navigate through 3D environments by following natural language instructions. While recent Video Large Language Models(Video-LLMs) have largely advanced VLN, they remain highly susceptible to State Drift in long scenarios. In these cases, the agent's internal state drifts away from the true task execution state, leading to aimless wandering and failure to execute essential maneuvers in the instruction. We attribute this failure to two distinct cognitive deficits: Progress Drift, where the agent fails to distinguish completed sub-goals from remaining ones, and Memory Drift, where the agent's history representations degrade, making it lose track of visited landmarks. In this paper, we propose a Dual-Anchoring Framework that explicitly anchors the instruction progress and history representations. First, to address progress drift, we introduce Instruction Progress Anchoring, which supervises the agent to generate structured text tokens that delineate completed versus remaining sub-goals. Second, to mitigate memory drift, we propose Memory Landmark Anchoring, which utilizes a Landmark-Centric World Model to retrospectively predict object-centric embeddings extracted by the Segment Anything Model, compelling the agent to explicitly verify past observations and preserve distinct representations of visited landmarks. Facilitating this framework, we curate two extensive datasets: 3.6 million samples with explicit progress descriptions, and 937k grounded landmark data for retrospective verification. Extensive experiments in both simulation and real-world environments demonstrate the superiority of our method, achieving a 15.2% improvement in Success Rate and a remarkable 24.7% gain on long-horizon trajectories. To facilitate further research, we will release our code, data generation pipelines, and the collected datasets.
Point-of-care transthoracic echocardiography (TTE) makes it possible to assess a patient's cardiac function in almost any setting. A critical step in the TTE exam is acquisition of the apical 4-chamber (A4CH) view, which is used to evaluate clinically impactful measurements such as left ventricular ejection fraction (LVEF). However, optimizing transducer pose for high-quality image acquisition and subsequent measurement is a challenging task, particularly for novice users. In this work, we present a multi-task network that provides feedback cues for A4CH view acquisition and automatically estimates LVEF in high-quality A4CH images. The network cascades a transducer pose scoring module and an uncertainty-aware LV landmark detector with automated LVEF estimation. A strength is that network training and inference do not require cumbersome or costly setups for transducer position tracking. We evaluate performance on point-of-care TTE data acquired with a spatially dense "sweep" protocol around the optimal A4CH view. The results demonstrate the network's ability to determine when the transducer pose is on target, close to target, or far from target based on the images alone, while generating visual landmark cues that guide anatomical interpretation and orientation. In conclusion, we demonstrate a promising strategy to provide guidance for A4CH view acquisition, which may be useful when deploying point-of-care TTE in limited resource settings.
Practical webcam gaze tracking is constrained not only by error, but also by calibration burden, robustness to head motion and session drift, runtime footprint, and browser use. We therefore target a deployment-oriented operating point rather than the image large-backbone regime. We cast landmark-based point-of-regard estimation as session-wise adaptation: a shared geometric encoder produces embeddings that can be aligned to a new session from a small calibration set. We present Equivariant Meta-Calibrated Gaze (EMC-Gaze), a lightweight landmark-only method combining an E(3)-equivariant landmark-graph encoder, local eye geometry, binocular emphasis, auxiliary 3D gaze-direction supervision, and a closed-form ridge calibrator differentiated through episodic meta-training. To reduce pose leakage, we use a two-view canonicalization consistency loss. The deployed predictor uses only facial landmarks and fits a per-session ridge head from brief calibration. In a fixation-style interactive evaluation over 33 sessions at 100 cm, EMC-Gaze achieves 5.79 +/- 1.81 deg RMSE after 9-point calibration versus 6.68 +/- 2.34 deg for Elastic Net; the gain is larger on still-head queries (2.92 +/- 0.75 deg vs. 4.45 +/- 0.30 deg). Across three subject holdouts of 10 subjects each, EMC-Gaze retains an advantage (5.66 +/- 0.19 deg vs. 6.49 +/- 0.33 deg). On MPIIFaceGaze with short per-session calibration, the eye-focused model reaches 8.82 +/- 1.21 deg at 16-shot calibration, ties Elastic Net at 1-shot, and outperforms it from 3-shot onward. The exported eye-focused encoder has 944,423 parameters, is 4.76 MB in ONNX, and supports calibrated browser prediction in 12.58/12.58/12.90 ms per sample (mean/median/p90) in Chromium 145 with ONNX Runtime Web. These results position EMC-Gaze as a calibration-friendly operating point rather than a universal state-of-the-art claim against heavier appearance-based systems.
This paper presents an implementation and evaluation of a Distributed Kalman--Consensus Filter (DKCF) for Multi-Object Tracking (MOT) in mobile robot networks operating under partial observability and heterogeneous localization uncertainty. A key challenge in such systems is the fusion of information from agents with differing localization quality, where frame misalignment can lead to inconsistent estimates, track duplication, and ghost tracks. To address this issue, we build upon the MOTLEE framework and retain its frame-alignment methodology, which uses consistently tracked dynamic objects as transient landmarks to improve relative pose estimates between robots. On top of this framework, we propose an uncertainty-aware adaptive consensus weighting mechanism that dynamically adjusts the influence of neighbor information based on the covariance of the transmitted estimates, thereby reducing the impact of unreliable data during distributed fusion. Local tracking is performed using a Kalman Filter (KF) with a Constant Velocity Model (CVM) and Global Nearest Neighbor (GNN) data association. simulation results demonstrate that adaptive weighting effectively protects local estimates from inconsistent data, yielding a MOTA improvement of 0.09 for agents suffering from localization drift, although system performance remains constrained by communication latency.
Reliable long-term deployment of autonomous robots in agricultural environments remains challenging due to perceptual aliasing, seasonal variability, and the dynamic nature of crop canopies. Vineyards, characterized by repetitive row structures and significant visual changes across phenological stages, represent a pivotal field challenge, limiting the robustness of conventional feature-based localization and mapping approaches. This paper introduces VinePT-Map, a semantic mapping framework that leverages vine trunks and support poles as persistent structural landmarks to enable season-agnostic and resilient robot localization. The proposed method formulates the mapping problem as a factor graph, integrating GPS, IMU, and RGB-D observations through robust geometrical constraints that exploit vineyard structure. An efficient perception pipeline based on instance segmentation and tracking, combined with a clustering filter for outlier rejection and pose refinement, enables accurate landmark detection using low-cost sensors and onboard computation. To validate the pipeline, we present a multi-season dataset for trunk and pole segmentation and tracking. Extensive field experiments conducted across diverse seasons demonstrate the robustness and accuracy of the proposed approach, highlighting its suitability for long-term autonomous operation in agricultural environments.
Simultaneous Localization and Mapping (SLAM) plays a crucial role in enabling autonomous vehicles to navigate previously unknown environments. Semantic SLAM mostly extends visual SLAM, leveraging the higher density information available to reason about the environment in a more human-like manner. This allows for better decision making by exploiting prior structural knowledge of the environment, usually in the form of labels. Current semantic SLAM techniques still mostly rely on a dense geometric representation of the environment, limiting their ability to apply constraints based on context. We propose PathSpace, a novel semantic SLAM framework that uses continuous B-splines to represent the environment in a compact manner, while also maintaining and reasoning through the continuous probability density functions required for probabilistic reasoning. This system applies the multiple strengths of B-splines in the context of SLAM to interpolate and fit otherwise discrete sparse environments. We test this framework in the context of autonomous racing, where we exploit pre-specified track characteristics to produce significantly reduced representations at comparable levels of accuracy to traditional landmark based methods and demonstrate its potential in limiting the resources used by a system with minimal accuracy loss.