In this paper, we propose a movable antenna (MA) empowered scheme for symbiotic radio (SR) communication systems. Specifically, multiple antennas at the primary transmitter (PT) can be flexibly moved to favorable locations to boost the channel conditions of the primary and secondary transmissions. The primary transmission is achieved by the active transmission from the PT to the primary user (PU), while the backscatter device (BD) takes a ride over the incident signal from the PT to passively send the secondary signal to the PU. Under this setup, we consider a primary rate maximization problem by jointly optimizing the transmit beamforming and the positions of MAs at the PT under a practical bit error rate constraint on the secondary transmission. Then, an alternating optimization framework with the utilization of the successive convex approximation, semi-definite processing and simulated annealing (SA) modified particle swarm optimization (SA-PSO) methods is proposed to find the solution of the transmit beamforming and MAs' positions. Finally, numerical results are provided to demonstrate the performance improvement provided by the proposed MA empowered scheme and the proposed algorithm.
Wireless powered and backscattering mobile edge computing (WPB-MEC) network is a novel network paradigm to supply energy supplies and computing resource to wireless sensors (WSs). However, its performance is seriously affected by severe attenuations and inappropriate assumptions of infinite computing capability at the hybrid access point (HAP). To address the above issues, in this paper, we propose a simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) aided scheme for boosting the performance of WPB-MEC network under the constraint of finite computing capability. Specifically, energy-constrained WSs are able to offload tasks actively or passively from them to the HAP. In this process, the STAR-RIS is utilized to improve the quantity of harvested energy and strengthen the offloading efficiency by adapting its operating protocols. We then maximize the sum computational bits (SCBs) under the finite computing capability constraint. To handle the solving challenges, we first present interesting results in closed-form and then design a block coordinate descent (BCD) based algorithm, ensuring a near-optimal solution. Finally, simulation results are provided to confirm that our proposed scheme can improve the SCBs by 9.9 times compared to the local computing only scheme.
Animating virtual characters has always been a fundamental research problem in virtual reality (VR). Facial animations play a crucial role as they effectively convey emotions and attitudes of virtual humans. However, creating such facial animations can be challenging, as current methods often involve utilization of expensive motion capture devices or significant investments of time and effort from human animators in tuning animation parameters. In this paper, we propose a holistic solution to automatically animate virtual human faces. In our solution, a deep learning model was first trained to retarget the facial expression from input face images to virtual human faces by estimating the blendshape coefficients. This method offers the flexibility of generating animations with characters of different appearances and blendshape topologies. Second, a practical toolkit was developed using Unity 3D, making it compatible with the most popular VR applications. The toolkit accepts both image and video as input to animate the target virtual human faces and enables users to manipulate the animation results. Furthermore, inspired by the spirit of Human-in-the-loop (HITL), we leveraged user feedback to further improve the performance of the model and toolkit, thereby increasing the customization properties to suit user preferences. The whole solution, for which we will make the code public, has the potential to accelerate the generation of facial animations for use in VR applications.
The recommendation of medication is a vital aspect of intelligent healthcare systems, as it involves prescribing the most suitable drugs based on a patient's specific health needs. Unfortunately, many sophisticated models currently in use tend to overlook the nuanced semantics of medical data, while only relying heavily on identities. Furthermore, these models face significant challenges in handling cases involving patients who are visiting the hospital for the first time, as they lack prior prescription histories to draw upon. To tackle these issues, we harness the powerful semantic comprehension and input-agnostic characteristics of Large Language Models (LLMs). Our research aims to transform existing medication recommendation methodologies using LLMs. In this paper, we introduce a novel approach called Large Language Model Distilling Medication Recommendation (LEADER). We begin by creating appropriate prompt templates that enable LLMs to suggest medications effectively. However, the straightforward integration of LLMs into recommender systems leads to an out-of-corpus issue specific to drugs. We handle it by adapting the LLMs with a novel output layer and a refined tuning loss function. Although LLM-based models exhibit remarkable capabilities, they are plagued by high computational costs during inference, which is impractical for the healthcare sector. To mitigate this, we have developed a feature-level knowledge distillation technique, which transfers the LLM's proficiency to a more compact model. Extensive experiments conducted on two real-world datasets, MIMIC-III and MIMIC-IV, demonstrate that our proposed model not only delivers effective results but also is efficient. To ease the reproducibility of our experiments, we release the implementation code online.
Generalized Category Discovery is a crucial real-world task. Despite the improved performance on known categories, current methods perform poorly on novel categories. We attribute the poor performance to two reasons: biased knowledge transfer between labeled and unlabeled data and noisy representation learning on the unlabeled data. To mitigate these two issues, we propose a Transfer and Alignment Network (TAN), which incorporates two knowledge transfer mechanisms to calibrate the biased knowledge and two feature alignment mechanisms to learn discriminative features. Specifically, we model different categories with prototypes and transfer the prototypes in labeled data to correct model bias towards known categories. On the one hand, we pull instances with known categories in unlabeled data closer to these prototypes to form more compact clusters and avoid boundary overlap between known and novel categories. On the other hand, we use these prototypes to calibrate noisy prototypes estimated from unlabeled data based on category similarities, which allows for more accurate estimation of prototypes for novel categories that can be used as reliable learning targets later. After knowledge transfer, we further propose two feature alignment mechanisms to acquire both instance- and category-level knowledge from unlabeled data by aligning instance features with both augmented features and the calibrated prototypes, which can boost model performance on both known and novel categories with less noise. Experiments on three benchmark datasets show that our model outperforms SOTA methods, especially on novel categories. Theoretical analysis is provided for an in-depth understanding of our model in general. Our code and data are available at https://github.com/Lackel/TAN.
Generalized Category Discovery (GCD) is a crucial task that aims to recognize both known and novel categories from a set of unlabeled data by utilizing a few labeled data with only known categories. Due to the lack of supervision and category information, current methods usually perform poorly on novel categories and struggle to reveal semantic meanings of the discovered clusters, which limits their applications in the real world. To mitigate above issues, we propose Loop, an end-to-end active-learning framework that introduces Large Language Models (LLMs) into the training loop, which can boost model performance and generate category names without relying on any human efforts. Specifically, we first propose Local Inconsistent Sampling (LIS) to select samples that have a higher probability of falling to wrong clusters, based on neighborhood prediction consistency and entropy of cluster assignment probabilities. Then we propose a Scalable Query strategy to allow LLMs to choose true neighbors of the selected samples from multiple candidate samples. Based on the feedback from LLMs, we perform Refined Neighborhood Contrastive Learning (RNCL) to pull samples and their neighbors closer to learn clustering-friendly representations. Finally, we select representative samples from clusters corresponding to novel categories to allow LLMs to generate category names for them. Extensive experiments on three benchmark datasets show that Loop outperforms SOTA models by a large margin and generates accurate category names for the discovered clusters. We will release our code and data after publication.
New Intent Discovery (NID) aims to recognize both new and known intents from unlabeled data with the aid of limited labeled data containing only known intents. Without considering structure relationships between samples, previous methods generate noisy supervisory signals which cannot strike a balance between quantity and quality, hindering the formation of new intent clusters and effective transfer of the pre-training knowledge. To mitigate this limitation, we propose a novel Diffusion Weighted Graph Framework (DWGF) to capture both semantic similarities and structure relationships inherent in data, enabling more sufficient and reliable supervisory signals. Specifically, for each sample, we diffuse neighborhood relationships along semantic paths guided by the nearest neighbors for multiple hops to characterize its local structure discriminately. Then, we sample its positive keys and weigh them based on semantic similarities and local structures for contrastive learning. During inference, we further propose Graph Smoothing Filter (GSF) to explicitly utilize the structure relationships to filter high-frequency noise embodied in semantically ambiguous samples on the cluster boundary. Extensive experiments show that our method outperforms state-of-the-art models on all evaluation metrics across multiple benchmark datasets. Code and data are available at https://github.com/yibai-shi/DWGF.
The recent surge in the field of Large Language Models (LLMs) has gained significant attention in numerous domains. In order to tailor an LLM to a specific domain such as a web-based healthcare system, fine-tuning with domain knowledge is necessary. However, two issues arise during fine-tuning LLMs for medical applications. The first is the problem of task variety, where there are numerous distinct tasks in real-world medical scenarios. This diversity often results in suboptimal fine-tuning due to data imbalance and seesawing problems. Additionally, the high cost of fine-tuning can be prohibitive, impeding the application of LLMs. The large number of parameters in LLMs results in enormous time and computational consumption during fine-tuning, which is difficult to justify. To address these two issues simultaneously, we propose a novel parameter-efficient fine-tuning framework for multi-task medical applications called MOELoRA. The framework aims to capitalize on the benefits of both MOE for multi-task learning and LoRA for parameter-efficient fine-tuning. To unify MOE and LoRA, we devise multiple experts as the trainable parameters, where each expert consists of a pair of low-rank matrices to maintain a small number of trainable parameters. Additionally, we propose a task-motivated gate function for all MOELoRA layers that can regulate the contributions of each expert and generate distinct parameters for various tasks. To validate the effectiveness and practicality of the proposed method, we conducted comprehensive experiments on a public multi-task Chinese medical dataset. The experimental results demonstrate that MOELoRA outperforms existing parameter-efficient fine-tuning methods. The implementation is available online for convenient reproduction of our experiments.
Discovering fine-grained categories from coarsely labeled data is a practical and challenging task, which can bridge the gap between the demand for fine-grained analysis and the high annotation cost. Previous works mainly focus on instance-level discrimination to learn low-level features, but ignore semantic similarities between data, which may prevent these models learning compact cluster representations. In this paper, we propose Denoised Neighborhood Aggregation (DNA), a self-supervised framework that encodes semantic structures of data into the embedding space. Specifically, we retrieve k-nearest neighbors of a query as its positive keys to capture semantic similarities between data and then aggregate information from the neighbors to learn compact cluster representations, which can make fine-grained categories more separatable. However, the retrieved neighbors can be noisy and contain many false-positive keys, which can degrade the quality of learned embeddings. To cope with this challenge, we propose three principles to filter out these false neighbors for better representation learning. Furthermore, we theoretically justify that the learning objective of our framework is equivalent to a clustering loss, which can capture semantic similarities between data to form compact fine-grained clusters. Extensive experiments on three benchmark datasets show that our method can retrieve more accurate neighbors (21.31% accuracy improvement) and outperform state-of-the-art models by a large margin (average 9.96% improvement on three metrics). Our code and data are available at https://github.com/Lackel/DNA.
Sequential recommendation (SRS) has become the technical foundation in many applications recently, which aims to recommend the next item based on the user's historical interactions. However, sequential recommendation often faces the problem of data sparsity, which widely exists in recommender systems. Besides, most users only interact with a few items, but existing SRS models often underperform these users. Such a problem, named the long-tail user problem, is still to be resolved. Data augmentation is a distinct way to alleviate these two problems, but they often need fabricated training strategies or are hindered by poor-quality generated interactions. To address these problems, we propose a Diffusion Augmentation for Sequential Recommendation (DiffuASR) for a higher quality generation. The augmented dataset by DiffuASR can be used to train the sequential recommendation models directly, free from complex training procedures. To make the best of the generation ability of the diffusion model, we first propose a diffusion-based pseudo sequence generation framework to fill the gap between image and sequence generation. Then, a sequential U-Net is designed to adapt the diffusion noise prediction model U-Net to the discrete sequence generation task. At last, we develop two guide strategies to assimilate the preference between generated and origin sequences. To validate the proposed DiffuASR, we conduct extensive experiments on three real-world datasets with three sequential recommendation models. The experimental results illustrate the effectiveness of DiffuASR. As far as we know, DiffuASR is one pioneer that introduce the diffusion model to the recommendation.