Holographic Intelligence Surface Assisted Integrated Sensing and Communication

Traditional discrete-array-based systems fail to exploit interactions between closely spaced antennas, resulting in inadequate utilization of the aperture resource. In this paper, we propose a holographic intelligence surface (HIS) assisted integrated sensing and communication (HISAC) system, wherein both the transmitter and receiver are fabricated using a continuous-aperture array. A continuous-discrete transformation of the HIS pattern based on the Fourier transform is proposed, converting the continuous pattern design into a discrete beamforming design. We formulate a joint transmit-receive beamforming optimization problem for the HISAC system, aiming to balance the performance of multi-target sensing while fulfilling the performance requirement of multi-user communication. To solve the non-convex problem with coupled variables, an alternating optimization-based algorithm is proposed to optimize the HISAC transmit-receive beamforming in an alternate manner. Specifically, the transmit beamforming design is solved by decoupling into a series of feasibility-checking sub-problems while the receive beamforming is determined by the Rayleigh quotient-based method. Simulation results demonstrate the superiority of the proposed HISAC system over traditional discrete-array-based ISAC systems, achieving significantly higher sensing performance while guaranteeing predetermined communication performance.

MSE-Based Training and Transmission Optimization for MIMO ISAC Systems

In this paper, we investigate a multiple-input multiple-output (MIMO) integrated sensing and communication (ISAC) system under typical block-fading channels. As a non-trivial extension to most existing works on ISAC, both the training and transmission signals sent by the ISAC transmitter are exploited for sensing. Specifically, we develop two training and transmission design schemes to minimize a weighted sum of the mean-squared errors (MSEs) of data transmission and radar target response matrix (TRM) estimation. For the former, we first optimize the training signal for simultaneous communication channel and radar TRM estimation. Then, based on the estimated instantaneous channel state information (CSI), we propose an efficient majorization-minimization (MM)-based robust ISAC transmission design, where a semi-closed form solution is obtained in each iteration. For the second scheme, the ISAC transmitter is assumed to have statistical CSI only for reducing the feedback overhead. With CSI statistics available, we integrate the training and transmission design into one single problem and propose an MM-based alternating algorithm to find a high-quality solution. In addition, we provide alternative structured and low-complexity solutions for both schemes under certain special cases. Finally, simulation results demonstrate that the radar performance is significantly improved compared to the existing scheme that integrates sensing into the transmission stage only. Moreover, it is verified that the investigated two schemes have advantages in terms of communication and sensing performances, respectively.

Reliable Sub-Nyquist Spectrum Sensing via Conformal Risk Control

Detecting occupied subbands is a key task for wireless applications such as unlicensed spectrum access. Recently, detection methods were proposed that extract per-subband features from sub-Nyquist baseband samples and then apply thresholding mechanisms based on held-out data. Such existing solutions can only provide guarantees in terms of false negative rate (FNR) in the asymptotic regime of large held-out data sets. In contrast, this work proposes a threshold mechanism-based conformal risk control (CRC), a method recently introduced in statistics. The proposed CRC-based thresholding technique formally meets user-specified FNR constraints, irrespective of the size of the held-out data set. By applying the proposed CRC-based framework to both reconstruction-based and classification-based sub-Nyquist spectrum sensing techniques, it is verified via experimental results that CRC not only provides theoretical guarantees on the FNR but also offers competitive true negative rate (TNR) performance.

ECG-TEM: Time-based sub-Nyquist sampling for ECG signal reconstruction and Hardware Prototype

Portable heart rate monitoring (HRM) systems based on electrocardiograms (ECGs) have become increasingly crucial for preventing lifestyle diseases. For such portable systems, minimizing power consumption and sampling rate is critical due to the substantial data generated during long-term ECG monitoring. The variable pulse-width finite rate of innovation (VPW-FRI) framework provides an effective solution for low-rate sampling and compression of ECG signals. We develop a time-based sub-Nyquist sampling and reconstruction method for ECG signals specifically designed for HRM applications. Our approach harnesses the integrate-and-fire time-encoding machine (IF-TEM) as a power-efficient, time-based, asynchronous sampler, generating a sequence of time instants without the need for a global clock. The ECG signal is represented as a linear combination of VPW-FRI pulses, which is then subjected to pre-filtering before being sampled by the IF-TEM sampler. A compactly supported robust filter with a frequency-domain alias cancellation condition is used to combat the effects of noise. Our reconstruction process involves consecutive partial summations of discrete representations of the input signal derived from the series of time encodings, further enhancing the accuracy of the reconstructed ECG signals. Additionally, we introduce an IF-TEM sampling hardware system for ECG signals, implemented using an analog filter device. The firing rate is 42-80Hz, equivalent to approximately 0.025-0.05 of the Nyquist rate. Our hardware validation bridges the gap between theory and practice and demonstrates the robust performance and practical applicability of our approach in accurately monitoring heart rates and reconstructing ECG signals.

Movable Antenna-Aided Hybrid Beamforming for Multi-User Communications

In this correspondence, we propose a movable antenna (MA)-aided multi-user hybrid beamforming scheme with a sub-connected structure, where multiple movable sub-arrays can independently change their positions within different local regions. To maximize the system sum rate, we jointly optimize the digital beamformer, analog beamformer, and positions of subarrays, under the constraints of unit modulus, finite movable regions, and power budget. Due to the non-concave/non-convex objective function/constraints, as well as the highly coupled variables, the formulated problem is challenging to solve. By employing fractional programming, we develop an alternating optimization framework to solve the problem via a combination of Lagrange multipliers, penalty method, and gradient descent. Numerical results reveal that the proposed MA-aided hybrid beamforming scheme significantly improves the sum rate compared to its fixed-position antenna (FPA) counterpart. Moreover, with sufficiently large movable regions, the proposed scheme with sub-connected MA arrays even outperforms the fully-connected FPA array.

Self-STORM: Deep Unrolled Self-Supervised Learning for Super-Resolution Microscopy

The use of fluorescent molecules to create long sequences of low-density, diffraction-limited images enables highly-precise molecule localization. However, this methodology requires lengthy imaging times, which limits the ability to view dynamic interactions of live cells on short time scales. Many techniques have been developed to reduce the number of frames needed for localization, from classic iterative optimization to deep neural networks. Particularly, deep algorithm unrolling utilizes both the structure of iterative sparse recovery algorithms and the performance gains of supervised deep learning. However, the robustness of this approach is highly dependant on having sufficient training data. In this paper we introduce deep unrolled self-supervised learning, which alleviates the need for such data by training a sequence-specific, model-based autoencoder that learns only from given measurements. Our proposed method exceeds the performance of its supervised counterparts, thus allowing for robust, dynamic imaging well below the diffraction limit without any labeled training samples. Furthermore, the suggested model-based autoencoder scheme can be utilized to enhance generalization in any sparse recovery framework, without the need for external training data.

Efficient Convolutional Forward Modeling and Sparse Coding in Multichannel Imaging

This study considers the Block-Toeplitz structural properties inherent in traditional multichannel forward model matrices, using Full Matrix Capture (FMC) in ultrasonic testing as a case study. We propose an analytical convolutional forward model that transforms reflectivity maps into FMC data. Our findings demonstrate that the convolutional model excels over its matrix-based counterpart in terms of computational efficiency and storage requirements. This accelerated forward modeling approach holds significant potential for various inverse problems, notably enhancing Sparse Signal Recovery (SSR) within the context LASSO regression, which facilitates efficient Convolutional Sparse Coding (CSC) algorithms. Additionally, we explore the integration of Convolutional Neural Networks (CNNs) for the forward model, employing deep unfolding to implement the Learned Block Convolutional ISTA (BC-LISTA).

NeuPAN: Direct Point Robot Navigation with End-to-End Model-based Learning

Navigating a nonholonomic robot in a cluttered environment requires extremely accurate perception and locomotion for collision avoidance. This paper presents NeuPAN: a real-time, highly-accurate, map-free, robot-agnostic, and environment-invariant robot navigation solution. Leveraging a tightly-coupled perception-locomotion framework, NeuPAN has two key innovations compared to existing approaches: 1) it directly maps raw points to a learned multi-frame distance space, avoiding error propagation from perception to control; 2) it is interpretable from an end-to-end model-based learning perspective, enabling provable convergence. The crux of NeuPAN is to solve a high-dimensional end-to-end mathematical model with various point-level constraints using the plug-and-play (PnP) proximal alternating-minimization network (PAN) with neurons in the loop. This allows NeuPAN to generate real-time, end-to-end, physically-interpretable motions directly from point clouds, which seamlessly integrates data- and knowledge-engines, where its network parameters are adjusted via back propagation. We evaluate NeuPAN on car-like robot, wheel-legged robot, and passenger autonomous vehicle, in both simulated and real-world environments. Experiments demonstrate that NeuPAN outperforms various benchmarks, in terms of accuracy, efficiency, robustness, and generalization capability across various environments, including the cluttered sandbox, office, corridor, and parking lot. We show that NeuPAN works well in unstructured environments with arbitrary-shape undetectable objects, making impassable ways passable.

Communication Efficient ConFederated Learning: An Event-Triggered SAGA Approach

Federated learning (FL) is a machine learning paradigm that targets model training without gathering the local data dispersed over various data sources. Standard FL, which employs a single server, can only support a limited number of users, leading to degraded learning capability. In this work, we consider a multi-server FL framework, referred to as \emph{Confederated Learning} (CFL), in order to accommodate a larger number of users. A CFL system is composed of multiple networked edge servers, with each server connected to an individual set of users. Decentralized collaboration among servers is leveraged to harness all users' data for model training. Due to the potentially massive number of users involved, it is crucial to reduce the communication overhead of the CFL system. We propose a stochastic gradient method for distributed learning in the CFL framework. The proposed method incorporates a conditionally-triggered user selection (CTUS) mechanism as the central component to effectively reduce communication overhead. Relying on a delicately designed triggering condition, the CTUS mechanism allows each server to select only a small number of users to upload their gradients, without significantly jeopardizing the convergence performance of the algorithm. Our theoretical analysis reveals that the proposed algorithm enjoys a linear convergence rate. Simulation results show that it achieves substantial improvement over state-of-the-art algorithms in terms of communication efficiency.

Precoding for Multi-Cell ISAC: from Coordinated Beamforming to Coordinated Multipoint and Bi-Static Sensing

This paper proposes a framework for designing robust precoders for a multi-input single-output (MISO) system that performs integrated sensing and communication (ISAC) across multiple cells and users. We use Cramer-Rao-Bound (CRB) to measure the sensing performance and derive its expressions for two multi-cell scenarios, namely coordinated beamforming (CBF) and coordinated multi-point (CoMP). In the CBF scheme, a BS shares channel state information (CSI) and estimates target parameters using monostatic sensing. In contrast, a BS in the CoMP scheme shares the CSI and data, allowing bistatic sensing through inter-cell reflection. We consider both block-level (BL) and symbol-level (SL) precoding schemes for both the multi-cell scenarios that are robust to channel state estimation errors. The formulated optimization problems to minimize the CRB in estimating the parameters of a target and maximize the minimum communication signal-to-interference-plus-noise-ratio (SINR) while satisfying a given total transmit power budget are non-convex. We tackle the non-convexity using a combination of semidefinite relaxation (SDR) and alternating optimization (AO) techniques. Simulations suggest that neglecting the inter-cell reflection and communication links degrades the performance of an ISAC system. The CoMP scenario employing SL precoding performs the best, whereas the BL precoding applied in the CBF scenario produces relatively high estimation error for a given minimum SINR value.