Due to the ability to provide superior error-correction performance, the successive cancellation list (SCL) algorithm is widely regarded as one of the most promising decoding algorithms for polar codes with short-to-moderate code lengths. However, the application of SCL decoding in low-latency communication scenarios is limited due to its sequential nature. To reduce the decoding latency, developing tailored fast and efficient list decoding algorithms of specific polar substituent codes (special nodes) is a promising solution. Recently, fast list decoding algorithms are proposed by considering special nodes with low code rates. Aiming to further speedup the SCL decoding, this paper presents fast list decoding algorithms for two types of high-rate special nodes, namely single-parity-check (SPC) nodes and sequence rate one or single-parity-check (SR1/SPC) nodes. In particular, we develop two classes of fast list decoding algorithms for these nodes, where the first class uses a sequential decoding procedure to yield decoding latency that is linear with the list size, and the second further parallelizes the decoding process by pre-determining the redundant candidate paths offline. Simulation results show that the proposed list decoding algorithms are able to achieve up to 70.7\% lower decoding latency than state-of-the-art fast SCL decoders, while exhibiting the same error-correction performance.
Surface defect inspection is a very challenging task in which surface defects usually show weak appearances or exist under complex backgrounds. Most high-accuracy defect detection methods require expensive computation and storage overhead, making them less practical in some resource-constrained defect detection applications. Although some lightweight methods have achieved real-time inference speed with fewer parameters, they show poor detection accuracy in complex defect scenarios. To this end, we develop a Global Context Aggregation Network (GCANet) for lightweight saliency detection of surface defects on the encoder-decoder structure. First, we introduce a novel transformer encoder on the top layer of the lightweight backbone, which captures global context information through a novel Depth-wise Self-Attention (DSA) module. The proposed DSA performs element-wise similarity in channel dimension while maintaining linear complexity. In addition, we introduce a novel Channel Reference Attention (CRA) module before each decoder block to strengthen the representation of multi-level features in the bottom-up path. The proposed CRA exploits the channel correlation between features at different layers to adaptively enhance feature representation. The experimental results on three public defect datasets demonstrate that the proposed network achieves a better trade-off between accuracy and running efficiency compared with other 17 state-of-the-art methods. Specifically, GCANet achieves competitive accuracy (91.79% $F_{\beta}^{w}$, 93.55% $S_\alpha$, and 97.35% $E_\phi$) on SD-saliency-900 while running 272fps on a single gpu.
Surface defect inspection is of great importance for industrial manufacture and production. Though defect inspection methods based on deep learning have made significant progress, there are still some challenges for these methods, such as indistinguishable weak defects and defect-like interference in the background. To address these issues, we propose a transformer network with multi-stage CNN (Convolutional Neural Network) feature injection for surface defect segmentation, which is a UNet-like structure named CINFormer. CINFormer presents a simple yet effective feature integration mechanism that injects the multi-level CNN features of the input image into different stages of the transformer network in the encoder. This can maintain the merit of CNN capturing detailed features and that of transformer depressing noises in the background, which facilitates accurate defect detection. In addition, CINFormer presents a Top-K self-attention module to focus on tokens with more important information about the defects, so as to further reduce the impact of the redundant background. Extensive experiments conducted on the surface defect datasets DAGM 2007, Magnetic tile, and NEU show that the proposed CINFormer achieves state-of-the-art performance in defect detection.
Surface defect inspection is an important task in industrial inspection. Deep learning-based methods have demonstrated promising performance in this domain. Nevertheless, these methods still suffer from misjudgment when encountering challenges such as low-contrast defects and complex backgrounds. To overcome these issues, we present a decision fusion network (DFNet) that incorporates the semantic decision with the feature decision to strengthen the decision ability of the network. In particular, we introduce a decision fusion module (DFM) that extracts a semantic vector from the semantic decision branch and a feature vector for the feature decision branch and fuses them to make the final classification decision. In addition, we propose a perception fine-tuning module (PFM) that fine-tunes the foreground and background during the segmentation stage. PFM generates the semantic and feature outputs that are sent to the classification decision stage. Furthermore, we present an inner-outer separation weight matrix to address the impact of label edge uncertainty during segmentation supervision. Our experimental results on the publicly available datasets including KolektorSDD2 (96.1% AP) and Magnetic-tile-defect-datasets (94.6% mAP) demonstrate the effectiveness of the proposed method.
Motion planning has been an important research topic in achieving safe and flexible maneuvers for intelligent vehicles. However, it remains challenging to realize efficient and optimal planning in the presence of uncertain model dynamics. In this paper, a sparse kernel-based reinforcement learning (RL) algorithm with Gaussian Process (GP) Regression (called GP-SKRL) is proposed to achieve online adaption and near-optimal motion planning performance. In this algorithm, we design an efficient sparse GP regression method to learn the uncertain dynamics. Based on the updated model, a sparse kernel-based policy iteration algorithm with an exponential barrier function is designed to learn the near-optimal planning policies with the capability to avoid dynamic obstacles. Thereby, batch-mode GP-SKRL with online adaption capability can estimate the changing system dynamics. The converged RL policies are then deployed on vehicles efficiently under a safety-aware module. As a result, the produced driving actions are safe and less conservative, and the planning performance has been noticeably improved. Extensive simulation results show that GP-SKRL outperforms several advanced motion planning methods in terms of average cumulative cost, trajectory length, and task completion time. In particular, experiments on a Hongqi E-HS3 vehicle demonstrate that superior GP-SKRL provides a practical planning solution.
This paper investigates the system model and the transmit beamforming design for the Cell-Free massive multi-input multi-output (MIMO) integrated sensing and communication (ISAC) system. The impact of the uncertainty of the target locations on the propagation of wireless signals is considered during both uplink and downlink phases, and especially, the main statistics of the MIMO channel estimation error are theoretically derived in the closed-form fashion. A fundamental performance metric, termed communication-sensing (C-S) region, is defined for the considered system via three cases, i.e., the sensing-only case, the communication-only case and the ISAC case. The transmit beamforming design problems for the three cases are respectively carried out through different reformulations, e.g., the Lagrangian dual transform and the quadratic fractional transform, and some combinations of the block coordinate descent method and the successive convex approximation method. Numerical results present a 3-dimensional C-S region with a dynamic number of access points to illustrate the trade-off between communication and radar sensing. The advantage for radar sensing of the Cell-Free massive MIMO system is also studied via a comparison with the traditional cellular system. Finally, the efficacy of the proposed beamforming scheme is validated in comparison with zero-forcing and maximum ratio transmission schemes.
The imbalanced distribution of long-tailed data poses a challenge for deep neural networks, as models tend to prioritize correctly classifying head classes over others so that perform poorly on tail classes. The lack of semantics for tail classes is one of the key factors contributing to their low recognition accuracy. To rectify this issue, we propose to augment tail classes by borrowing the diverse semantic information from head classes, referred to as head-to-tail fusion (H2T). We randomly replace a portion of the feature maps of the tail class with those of the head class. The fused feature map can effectively enhance the diversity of tail classes by incorporating features from head classes that are relevant to them. The proposed method is easy to implement due to its additive fusion module, making it highly compatible with existing long-tail recognition methods for further performance boosting. Extensive experiments on various long-tailed benchmarks demonstrate the effectiveness of the proposed H2T. The source code is temporarily available at https://github.com/Keke921/H2T.
Long-tailed data is still a big challenge for deep neural networks, even though they have achieved great success on balanced data. We observe that vanilla training on long-tailed data with cross-entropy loss makes the instance-rich head classes severely squeeze the spatial distribution of the tail classes, which leads to difficulty in classifying tail class samples. Furthermore, the original cross-entropy loss can only propagate gradient short-lively because the gradient in softmax form rapidly approaches zero as the logit difference increases. This phenomenon is called softmax saturation. It is unfavorable for training on balanced data, but can be utilized to adjust the validity of the samples in long-tailed data, thereby solving the distorted embedding space of long-tailed problems. To this end, this paper proposes the Gaussian clouded logit adjustment by Gaussian perturbation of different class logits with varied amplitude. We define the amplitude of perturbation as cloud size and set relatively large cloud sizes to tail classes. The large cloud size can reduce the softmax saturation and thereby making tail class samples more active as well as enlarging the embedding space. To alleviate the bias in a classifier, we therefore propose the class-based effective number sampling strategy with classifier re-training. Extensive experiments on benchmark datasets validate the superior performance of the proposed method. Source code is available at https://github.com/Keke921/GCLLoss.
It is not uncommon that real-world data are distributed with a long tail. For such data, the learning of deep neural networks becomes challenging because it is hard to classify tail classes correctly. In the literature, several existing methods have addressed this problem by reducing classifier bias provided that the features obtained with long-tailed data are representative enough. However, we find that training directly on long-tailed data leads to uneven embedding space. That is, the embedding space of head classes severely compresses that of tail classes, which is not conducive to subsequent classifier learning. %further improving model performance. This paper therefore studies the problem of long-tailed visual recognition from the perspective of feature level. We introduce feature augmentation to balance the embedding distribution. The features of different classes are perturbed with varying amplitudes in Gaussian form. Based on these perturbed features, two novel logit adjustment methods are proposed to improve model performance at a modest computational overhead. Subsequently, the distorted embedding spaces of all classes can be calibrated. In such balanced-distributed embedding spaces, the biased classifier can be eliminated by simply retraining the classifier with class-balanced sampling data. Extensive experiments conducted on benchmark datasets demonstrate the superior performance of the proposed method over the state-of-the-art ones.