South China University of Technology, Guangzhou, China
Abstract:Millimeter wave (mmWave) communications are sensitive to blockage over radio propagation paths. The emerging paradigm of reconfigurable intelligent surface (RIS) has the potential to overcome this issue by its ability to arbitrarily reflect the incident signals toward desired directions. This paper proposes a Neyman-Pearson (NP) criterion-based blockage-aware algorithm to improve communication resilience against blockage in mobile mmWave multiple input multiple output (MIMO) systems. By virtue of this pragmatic blockage-aware technique, we further propose an outage-constrained beamforming design for downlink mmWave MIMO transmission to achieve outage probability minimization and achievable rate maximization. To minimize the outage probability, a robust RIS beamformer with variant beamwidth is designed to combat uncertain channel state information (CSI). For the rate maximization problem, an accelerated projected gradient descent (PGD) algorithm is developed to solve the computational challenge of high-dimensional RIS phase-shift matrix (PSM) optimization. Particularly, we leverage a subspace constraint to reduce the scope of the projection operation and formulate a new Nesterov momentum acceleration scheme to speed up the convergence process of PGD. Extensive experiments confirm the effectiveness of the proposed blockage-aware approach, and the proposed accelerated PGD algorithm outperforms a number of representative baseline algorithms in terms of the achievable rate.
Abstract:As a new candidate waveform for the next generation wireless communications, orthogonal chirp division multiplexing (OCDM) has attracted growing attention for its ability to achieve full diversity in uncoded transmission, and its robustness to narrow-band interference or impulsive noise. Under high mobility channels with multiple lags and multiple Doppler-shifts (MLMD), the signal suffers doubly selective (DS) fadings in time and frequency domain, and data symbols modulated on orthogonal chirps are interfered by each other. To address the problem of symbol detection of OCDM over MLMD channel, under the assumption that path attenuation factors, delays, and Doppler shifts of the channel are available, we first derive the closed-form channel matrix in Fresnel domain, and then propose a low-complexity method to approximate it as a sparse matrix. Based on the approximated Fresnel-domain channel, we propose a message passing (MP) based detector to estimate the transmit symbols iteratively. Finally, under two MLMD channels (an underspread channel for terrestrial vehicular communication, and an overspread channel for narrow-band underwater acoustic communications), Monte Carlo simulation results and analysis are provided to validate its advantages as a promising detector for OCDM.
Abstract:The development of artificial intelligence (AI) provides opportunities for the promotion of deep neural network (DNN)-based applications. However, the large amount of parameters and computational complexity of DNN makes it difficult to deploy it on edge devices which are resource-constrained. An efficient method to address this challenge is model partition/splitting, in which DNN is divided into two parts which are deployed on device and server respectively for co-training or co-inference. In this paper, we consider a split federated learning (SFL) framework that combines the parallel model training mechanism of federated learning (FL) and the model splitting structure of split learning (SL). We consider a practical scenario of heterogeneous devices with individual split points of DNN. We formulate a joint problem of split point selection and bandwidth allocation to minimize the system latency. By using alternating optimization, we decompose the problem into two sub-problems and solve them optimally. Experiment results demonstrate the superiority of our work in latency reduction and accuracy improvement.
Abstract:Affine frequency division multiplexing (AFDM) is a new multicarrier technique based on chirp signals tailored for high-mobility communications, which can achieve full diversity. In this paper, we propose an index modulation (IM) scheme based on the framework of AFDM systems, named AFDM-IM. In the proposed AFDM-IM scheme, the information bits are carried by the activation state of the subsymbols in discrete affine Fourier (DAF) domain in addition to the conventional constellation symbols. To efficiently perform IM, we divide the subsymbols in DAF domain into several groups and consider both the localized and distributed strategies. An asymptotically tight upper bound on the average bit error rate (BER) of the maximum-likelihood detection in the existence of channel estimation errors is derived in closed-form. Computer simulations are carried out to evaluate the performance of the proposed AFDM-IM scheme, whose results corroborate its superiority over the benchmark schemes in the linear time-varying channels. We also evaluate the BER performance of the index and modulated bits for the AFDM-IM scheme with and without satisfying the full diversity condition of AFDM. The results show that the index bits have a stronger diversity protection than the modulated bits even when the full diversity condition of AFDM is not satisfied.
Abstract:Affine frequency division multiplexing (AFDM) is an emerging multicarrier waveform that offers a potential solution for achieving reliable communication for time-varying channels. This paper proposes two maximum likelihood (ML) estimators of symbol time offset and carrier frequency offset for AFDM systems. The joint ML estimator evaluates the arrival time and frequency offset by comparing the correlations of samples. Moreover, we propose the stepwise ML estimator to reduce the complexity. The proposed estimators exploit the redundant information contained within the chirp-periodic prefix inherent in AFDM symbols, thus dispensing with any additional pilots. To further mitigate the intercarrier interference resulting from the residual frequency offset, we design a mirror-mappingbased scheme for AFDM systems. Numerical results verify the effectiveness of the proposed time and frequency offset estimation criteria and the mirror-mapping-based modulation for AFDM systems.
Abstract:As a promising technique for high-mobility wireless communications, orthogonal time frequency space (OTFS) has been proved to enjoy excellent advantages with respect to traditional orthogonal frequency division multiplexing (OFDM). Although multiple studies have considered index modulation (IM) based OTFS (IM-OTFS) schemes to further improve system performance, a challenging and open problem is the development of effective IM schemes and efficient receivers for practical OTFS systems that must operate in the presence of channel delays and Doppler shifts. In this paper, we propose two novel block-wise IM schemes for OTFS systems, named delay-IM with OTFS (DeIM-OTFS) and Doppler-IM with OTFS (DoIM-OTFS), where a block of delay/Doppler resource bins are activated simultaneously. Based on a maximum likelihood (ML) detector, we analyze upper bounds on the average bit error rates for the proposed DeIM-OTFS and DoIM-OTFS schemes, and verify their performance advantages over the existing IM-OTFS systems. We also develop a multi-layer joint symbol and activation pattern detection (MLJSAPD) algorithm and a customized message passing detection (CMPD) algorithm for our proposed DeIMOTFS and DoIM-OTFS systems with low complexity. Simulation results demonstrate that our proposed MLJSAPD and CMPD algorithms can achieve desired performance with robustness to the imperfect channel state information (CSI).
Abstract:This letter introduces a novel algorithm for generating codebooks in molecular communications (MC). The proposed algorithm utilizes character entropy to effectively mitigate inter-symbol interference (ISI) during MC via diffusion. Based on Huffman coding, the algorithm ensures that consecutive bit-1s are avoided in the resulting codebook. Additionally, the error-correction process at the receiver effectively eliminates ISI in the time slot immediately following a bit-1. We conduct an ISI analysis, which confirms that the proposed algorithm significantly reduces decoding errors. Through numerical analysis, we demonstrate that the proposed codebook exhibits superior performance in terms of character error rate compared to existing codebooks. Furthermore, we validate the performance of the algorithm through experimentation on a real-time testbed.
Abstract:Full duplex (FD) radio has attracted extensive attention due to its co-time and co-frequency transceiving capability. {However, the potential gain brought by FD radios is closely related to the management of self-interference (SI), which imposes high or even stringent requirements on SI cancellation (SIC) techniques. When the FD deployment evolves into next-generation mobile networking, the SI problem becomes more complicated, significantly limiting its potential gains.} In this paper, we conceive a multi-cell FD networking scheme by deploying a reconfigurable intelligent surface (RIS) at the cell boundary to configure the radio environment proactively. To achieve the full potential of the system, we aim to maximize the sum rate (SR) of multiple cells by jointly optimizing the transmit precoding (TPC) matrices at FD base stations (BSs) and users and the phase shift matrix at RIS. Since the original problem is non-convex, we reformulate and decouple it into a pair of subproblems by utilizing the relationship between the SR and minimum mean square error (MMSE). The optimal solutions of TPC matrices are obtained in closed form, while both complex circle manifold (CCM) and successive convex approximation (SCA) based algorithms are developed to resolve the phase shift matrix suboptimally. Our simulation results show that introducing an RIS into an FD networking system not only improves the overall SR significantly but also enhances the cell edge performance prominently. More importantly, we validate that the RIS deployment with optimized phase shifts can reduce the requirement for SIC and the number of BS antennas, which further reduces the hardware cost and power consumption, especially with a sufficient number of reflecting elements. As a result, the utilization of an RIS enables the originally cumbersome FD networking system to become efficient and practical.
Abstract:In this paper, simultaneously transmitting and reflecting (STAR) reconfigurable intelligent surface (RIS) is investigated in the multi-user mobile edge computing (MEC) system to improve the computation rate. Compared with traditional RIS-aided MEC, STAR-RIS extends the service coverage from half-space to full-space and provides new flexibility for improving the computation rate for end users. However, the STAR-RIS-aided MEC system design is a challenging problem due to the non-smooth and non-convex binary amplitude coefficients with coupled phase shifters. To fill this gap, this paper formulates a computation rate maximization problem via the joint design of the STAR-RIS phase shifts, reflection and transmission amplitude coefficients, the receive beamforming vectors, and energy partition strategies for local computing and offloading. To tackle the discontinuity caused by binary variables, we propose an efficient smoothing-based method to decrease convergence error, in contrast to the conventional penalty-based method, which brings many undesired stationary points and local optima. Furthermore, a fast iterative algorithm is proposed to obtain a stationary point for the joint optimization problem, with each subproblem solved by a low-complexity algorithm, making the proposed design scalable to a massive number of users and STAR-RIS elements. Simulation results validate the strength of the proposed smoothing-based method and show that the proposed fast iterative algorithm achieves a higher computation rate than the conventional method while saving the computation time by at least an order of magnitude. Moreover, the resultant STAR-RIS-aided MEC system significantly improves the computation rate compared to other baseline schemes with conventional reflect-only/transmit-only RIS.
Abstract:Edge-assisted vehicle-to-everything (V2X) motion planning is an emerging paradigm to achieve safe and efficient autonomous driving, since it leverages the global position information shared among multiple vehicles. However, due to the imperfect channel state information (CSI), the position information of vehicles may become outdated and inaccurate. Conventional methods ignoring the communication delays could severely jeopardize driving safety. To fill this gap, this paper proposes a robust V2X motion planning policy that adapts between competitive driving under a low communication delay and conservative driving under a high communication delay, and guarantees small communication delays at key waypoints via power control. This is achieved by integrating the vehicle mobility and communication delay models and solving a joint design of motion planning and power control problem via the block coordinate descent framework. Simulation results show that the proposed driving policy achieves the smallest collision ratio compared with other benchmark policies.