Reconfigurable Intelligent Surface-Aided Dual-Function Radar and Communication Systems With MU-MIMO Communication

In this paper, we investigate an reconfigurable intelligent surface (RIS)-aided integrated sensing and communication (ISAC) system. Our objective is to maximize the achievable sum rate of the multi-antenna communication users through the joint active and passive beamforming. {Specifically}, the weighted minimum mean-square error (WMMSE) method is { first} used to reformulate the original problem into an equivalent one. Then, we utilize an alternating optimization (AO) { algorithm} to decouple the optimization variables and decompose this challenging problem into two subproblems. Given reflecting coefficients, a penalty-based algorithm is utilized to deal with the non-convex radar signal-to-noise ratio (SNR) constraints. For the given beamforming matrix of the BS, we apply majorization-minimization (MM) to transform the problem into a quadratic constraint quadratic programming (QCQP) problem, which is ultimately solved using a semidefinite relaxation (SDR)-based algorithm. Simulation results illustrate the advantage of deploying RIS in the considered multi-user MIMO (MU-MIMO) ISAC systems.

Joint Beamforming Design for Double Active RIS-assisted Radar-Communication Coexistence Systems

Integrated sensing and communication (ISAC) technology has been considered as one of the key candidate technologies in the next-generation wireless communication systems. However, when radar and communication equipment coexist in the same system, i.e. radar-communication coexistence (RCC), the interference from communication systems to radar can be large and cannot be ignored. Recently, reconfigurable intelligent surface (RIS) has been introduced into RCC systems to reduce the interference. However, the "multiplicative fading" effect introduced by passive RIS limits its performance. To tackle this issue, we consider a double active RIS-assisted RCC system, which focuses on the design of the radar's beamforming vector and the active RISs' reflecting coefficient matrices, to maximize the achievable data rate of the communication system. The considered system needs to meet the radar detection constraint and the power budgets at the radar and the RISs. Since the problem is non-convex, we propose an algorithm based on the penalty dual decomposition (PDD) framework. Specifically, we initially introduce auxiliary variables to reformulate the coupled variables into equation constraints and incorporate these constraints into the objective function through the PDD framework. Then, we decouple the equivalent problem into several subproblems by invoking the block coordinate descent (BCD) method. Furthermore, we employ the Lagrange dual method to alternately optimize these subproblems. Simulation results verify the effectiveness of the proposed algorithm. Furthermore, the results also show that under the same power budget, deploying double active RISs in RCC systems can achieve higher data rate than those with single active RIS and double passive RISs.

Secure Wireless Communication in Active RIS-Assisted DFRC System

This work considers a dual-functional radar and communication (DFRC) system with an active reconfigurable intelligent surface (RIS) and a potential eavesdropper. Our purpose is to maximize the secrecy rate (SR) of the system by jointly designing the beamforming matrix at the DFRC base station (BS) and the reflecting coefficients at the active RIS, subject to the signal-to-interference-plus-noise-ratio (SINR) constraint of the radar echo and the power consumption constraints at the DFRC-BS and active RIS. An alternating optimization (AO) algorithm based on semi-definite relaxation (SDR) and majorizationminimization (MM) is applied to solve the SR-maximization problem by alternately optimizing the beamforming matrix and the reflecting coefficients. Specifically, we first apply the SDR and successive convex approximation (SCA) methods to transform the two subproblems into more tractable forms, then the MM method is applied to derive a concave surrogate function and iteratively solve the subproblems. Finally, simulation results indicate that the active RIS can better confront the impact of "multiplicative fading" and outperforms traditional passive RIS in terms of both secure data rate and radar sensing performance.