Integrating robotics into human-centric environments such as homes, necessitates advanced manipulation skills as robotic devices will need to engage with articulated objects like doors and drawers. Key challenges in robotic manipulation are the unpredictability and diversity of these objects' internal structures, which render models based on priors, both explicit and implicit, inadequate. Their reliability is significantly diminished by pre-interaction ambiguities, imperfect structural parameters, encounters with unknown objects, and unforeseen disturbances. Here, we present a prior-free strategy, Tac-Man, focusing on maintaining stable robot-object contact during manipulation. Utilizing tactile feedback, but independent of object priors, Tac-Man enables robots to proficiently handle a variety of articulated objects, including those with complex joints, even when influenced by unexpected disturbances. Demonstrated in both real-world experiments and extensive simulations, it consistently achieves near-perfect success in dynamic and varied settings, outperforming existing methods. Our results indicate that tactile sensing alone suffices for managing diverse articulated objects, offering greater robustness and generalization than prior-based approaches. This underscores the importance of detailed contact modeling in complex manipulation tasks, especially with articulated objects. Advancements in tactile sensors significantly expand the scope of robotic applications in human-centric environments, particularly where accurate models are difficult to obtain.
Here we present a flexible tip mount for eversion (vine) robots. This soft cap allows attaching a payload to an eversion robot while allowing moving through narrow openings, as well as the eversion of protruding objects, and expanded surfaces.
The human hand has an inherent ability to manipulate and re-orientate objects without external assistance. As a consequence, we are able to operate tools and perform an array of actions using just one hand, without having to continuously re-grasp objects. Emulating this functionality in robotic end-effectors remains a key area of study with efforts being made to create advanced control systems that could be used to operate complex manipulators. In this paper, a three fingered soft gripper with an active rotary palm is presented as a simpler, alternative method of performing in-hand rotations. The gripper, complete with its pneumatic suction cup to prevent object slippage, was tested and found to be able to effectively grasp and rotate a variety of objects both quickly and precisely.
A system and testing rig were designed and built to simulate the use of an eversion robot equipped with a radiation sensor to characterise an irradiated pipe prior to decommissioning. The magnets were used as dummy radiation sources which were detected by a hall effect sensor mounted in the interior of the robot. The robot successfully navigated a simple structure with sharp 45{\deg} and 90{\deg} swept bends as well as constrictions that were used to model partial blockages.
This paper presents a novel algorithm for crack localisation and detection based on visual and tactile analysis via fibre-optics. A finger-shaped sensor based on fibre-optics is employed for the data acquisition to collect data for the analysis and the experiments. To detect the possible locations of cracks a camera is used to scan an environment while running an object detection algorithm. Once the crack is detected, a fully-connected graph is created from a skeletonised version of the crack. A minimum spanning tree is then employed for calculating the shortest path to explore the crack which is then used to develop the motion planner for the robotic manipulator. The motion planner divides the crack into multiple nodes which are then explored individually. Then, the manipulator starts the exploration and performs the tactile data classification to confirm if there is indeed a crack in that location or just a false positive from the vision algorithm. If a crack is detected, also the length, width, orientation and number of branches are calculated. This is repeated until all the nodes of the crack are explored. In order to validate the complete algorithm, various experiments are performed: comparison of exploration of cracks through full scan and motion planning algorithm, implementation of frequency-based features for crack classification and geometry analysis using a combination of vision and tactile data. From the results of the experiments, it is shown that the proposed algorithm is able to detect cracks and improve the results obtained from vision to correctly classify cracks and their geometry with minimal cost thanks to the motion planning algorithm.
The elastic bands integrated using the ruffles technique proved to be effective in enhancing the performance of the soft robotic structures. In the actuator application, the elastic bands greatly increased the bending capability and force capability of the structure, while in the eversion robot cap application, the elastic bands improved the performance slightly by maintaining the sensory payload at the tip without restricting the eversion process. These findings demonstrate the potential of using elastic bands and textile techniques in soft robotics to create more efficient and adaptable structures.
Distributed sensor arrays capable of detecting multiple spatially distributed stimuli are considered an important element in the realisation of exteroceptive and proprioceptive soft robots. This paper expands upon the previously presented idea of decoupling the measurements of pressure and location of a local indentation from global deformation, using the overall stretch experienced by a soft capacitive e-skin. We employed machine learning methods to decouple and predict these highly coupled deformation stimuli, collecting data from a soft sensor e-skin which was then fed to a machine learning system comprising of linear regressor, gaussian process regressor, SVM and random forest classifier for stretch, force, detection and localisation respectively. We also studied how the localisation and forces are affected when two forces are applied simultaneously. Soft sensor arrays aided by appropriately chosen machine learning techniques can pave the way to e-skins capable of deciphering multi-modal stimuli in soft robots.
In conjunction with huge recent progress in camera and computer vision technology, camera-based sensors have increasingly shown considerable promise in relation to tactile sensing. In comparison to competing technologies (be they resistive, capacitive or magnetic based), they offer super-high-resolution, while suffering from fewer wiring problems. The human tactile system is composed of various types of mechanoreceptors, each able to perceive and process distinct information such as force, pressure, texture, etc. Camera-based tactile sensors such as GelSight mainly focus on high-resolution geometric sensing on a flat surface, and their force measurement capabilities are limited by the hysteresis and non-linearity of the silicone material. In this paper, we present a miniaturised dome-shaped camera-based tactile sensor that allows accurate force and tactile sensing in a single coherent system. The key novelty of the sensor design is as follows. First, we demonstrate how to build a smooth silicone hemispheric sensing medium with uniform markers on its curved surface. Second, we enhance the illumination of the rounded silicone with diffused LEDs. Third, we construct a force-sensitive mechanical structure in a compact form factor with usage of springs to accurately perceive forces. Our multi-modal sensor is able to acquire tactile information from multi-axis forces, local force distribution, and contact geometry, all in real-time. We apply an end-to-end deep learning method to process all the information.
Growing robots based on the eversion principle are known for their ability to extend rapidly, from within, along their longitudinal axis, and, in doing so, reach deep into hitherto inaccessible, remote spaces. Despite many advantages, eversion robots also present significant challenges, one of which is maintaining sensory payload at the tip without restricting the eversion process. A variety of tip mechanisms has been proposed by the robotics community, among them rounded caps of relatively complex construction that are not always compatible with functional hardware, such as sensors or navigation pouches, integrated with the main eversion structure. Moreover, many tip designs incorporate rigid materials, reducing the robot's flexibility and consequent ability to navigate through narrow openings. Here, we address these shortcomings and propose a design to overcome them: a soft, entirely fabric based, cylindrical cap that can easily be slipped onto the tip of eversion robots. Having created a series of caps of different sizes and materials, an experimental study was conducted to evaluate our new design in terms of four key aspects: eversion robot made from multiple layers of everting material, solid objects protruding from the eversion robot, squeezability, and navigability. In all scenarios, we can show that our soft, flexible cap is robust in its ability to maintain its position and is capable of transporting payloads such as a camera across long distances.
Common disabilities like stroke and spinal cord injuries may cause loss of motor function in hands. They can be treated with robot assisted rehabilitation techniques, like continuously opening and closing the hand with help of a robot, in a cheaper, and less time consuming manner than traditional methods. Hand exoskeletons are developed to assist rehabilitation, but their bulky nature brings with it certain challenges. As soft robots use elastomeric and fabric elements rather than heavy links, and operate with pneumatic, hydraulic or tendon based rather than traditional rotary or linear motors, soft hand exoskeletons are deemed a better option in relation to rehabilitation.