A CBF-Adaptive Control Architecture for Visual Navigation for UAV in the Presence of Uncertainties

In this article, we propose a control solution for the safe transfer of a quadrotor UAV between two surface robots positioning itself only using the visual features on the surface robots, which enforces safety constraints for precise landing and visual locking, in the presence of modeling uncertainties and external disturbances. The controller handles the ascending and descending phases of the navigation using a visual locking control barrier function (VCBF) and a parametrizable switching descending CBF (DCBF) respectively, eliminating the need for an external planner. The control scheme has a backstepping approach for the position controller with the CBF filter acting on the position kinematics to produce a filtered virtual velocity control input, which is tracked by an adaptive controller to overcome modeling uncertainties and external disturbances. The experimental validation is carried out with a UAV that navigates from the base to the target using an RGB camera.

Adaptive Control of Euler-Lagrange Systems under Time-varying State Constraints without a Priori Bounded Uncertainty

In this article, a novel adaptive controller is designed for Euler-Lagrangian systems under predefined time-varying state constraints. The proposed controller could achieve this objective without a priori knowledge of system parameters and, crucially, of state-dependent uncertainties. The closed-loop stability is verified using the Lyapunov method, while the overall efficacy of the proposed scheme is verified using a simulated robotic arm compared to the state of the art.

PACED-5G: Predictive Autonomous Control using Edge for Drones over 5G

With the advent of technologies such as Edge computing, the horizons of remote computational applications have broadened multidimensionally. Autonomous Unmanned Aerial Vehicle (UAV) mission is a vital application to utilize remote computation to catalyze its performance. However, offloading computational complexity to a remote system increases the latency in the system. Though technologies such as 5G networking minimize communication latency, the effects of latency on the control of UAVs are inevitable and may destabilize the system. Hence, it is essential to consider the delays in the system and compensate for them in the control design. Therefore, we propose a novel Edge-based predictive control architecture enabled by 5G networking, PACED-5G (Predictive Autonomous Control using Edge for Drones over 5G). In the proposed control architecture, we have designed a state estimator for estimating the current states based on the available knowledge of the time-varying delays, devised a Model Predictive controller (MPC) for the UAV to track the reference trajectory while avoiding obstacles, and provided an interface to offload the high-level tasks over Edge systems. The proposed architecture is validated in two experimental test cases using a quadrotor UAV.

Adaptive Controllers for Quadrotors Carrying Unknown Payloads

With the advent of intelligent transport, quadrotors are becoming an attractive solution while lifting or dropping payloads during emergency evacuations, construction works, etc. During such operations, dynamic variations in (possibly unknown) payload cause considerable changes in the system dynamics. However, a systematic control solution to tackle such varying dynamical behaviour is still missing. In this work, two control solutions are proposed to solve two specific problems in aerial transportation of payload, as mentioned below. In the first work, we explore the tracking control problem for a six degrees-of-freedom quadrotor carrying different unknown payloads. Due to the state-dependent nature of the uncertainties caused by variation in the dynamics, the state-of-the-art adaptive control solutions would be ineffective against these uncertainties that can be completely unknown and possibly unbounded a priori. In addition, external disturbances such as wind while following a trajectory in all three positions and attitude angles. Hence, an adaptive control solution for quadrotors is proposed, which does not require any a priori knowledge of the parameters of quadrotor dynamics and external disturbances. The second work is focused on the interchanging dynamic behaviour of a quadrotor while loading and unloading different payloads during vertical operations. The control problem to maintain the desired altitude is formulated via a switched dynamical framework to capture the interchanging dynamics of the quadrotor during such vertical operations, and a robust adaptive control solution is proposed to tackle such dynamics when it is unknown. The stability of the closed-loop system is studied analytically and the effectiveness of the proposed solution is verified via simulations.