Algorithm Design and Prototype Validation for Reconfigurable Intelligent Sensing Surface: Forward-Only Transmission

Sensing-assisted communication schemes have recently garnered significant research attention. In this work, we design a dual-function reconfigurable intelligent surface (RIS), integrating both active and passive elements, referred to as the reconfigurable intelligent sensing surface (RISS), to enhance communication. By leveraging sensing results from the active elements, we propose communication enhancement and robust interference suppression schemes for both near-field and far-field models, implemented through the passive elements. These schemes remove the need for base station (BS) feedback for RISS control, simplifying the communication process by replacing traditional channel state information (CSI) feedback with real-time sensing from the active elements. The proposed schemes are theoretically analyzed and then validated using software-defined radio (SDR). Experimental results demonstrate the effectiveness of the sensing algorithms in real-world scenarios, such as direction of arrival (DOA) estimation and radio frequency (RF) identification recognition. Moreover, the RISS-assisted communication system shows strong performance in communication enhancement and interference suppression, particularly in near-field models.

Bedrock Models in Communication and Sensing: Advancing Generalization, Transferability, and Performance

Deep learning (DL) has emerged as a powerful tool for addressing the intricate challenges inherent in communication and sensing systems, significantly enhancing the intelligence of future sixth-generation (6G) networks. A substantial body of research has highlighted the promise of DL-based techniques in these domains. However, in addition to improving accuracy, new challenges must be addressed regarding the generalization and transferability of DL-based systems. To tackle these issues, this paper introduces a series of mathematically grounded and modularized models, referred to as bedrock models, specifically designed for integration into both communication and sensing systems. Due to their modular architecture, these models can be seamlessly incorporated into existing communication and sensing frameworks. For communication systems, the proposed models demonstrate substantial performance improvements while also exhibit strong transferability, enabling direct parameter sharing across different tasks, which greatly facilitates practical deployment. In sensing applications, the integration of the bedrock models into existing systems results in superior performance, reducing delay and Doppler estimation errors by an order of magnitude compared to traditional methods. Additionally, a pre-equalization strategy based on the bedrock models is proposed for the transmitter. By leveraging sensing information, the transmitted communication signal is dynamically adjusted without altering the communication model pre-trained in AWGN channels. This adaptation enables the system to effectively cope with doubly dispersive channels, restoring the received signal to an AWGN-like condition and achieving near-optimal performance. Simulation results substantiate the effectiveness and transferability of the proposed bedrock models, underscoring their potential to advance both communication and sensing systems.

WildSeg3D: Segment Any 3D Objects in the Wild from 2D Images

Recent advances in interactive 3D segmentation from 2D images have demonstrated impressive performance. However, current models typically require extensive scene-specific training to accurately reconstruct and segment objects, which limits their applicability in real-time scenarios. In this paper, we introduce WildSeg3D, an efficient approach that enables the segmentation of arbitrary 3D objects across diverse environments using a feed-forward mechanism. A key challenge of this feed-forward approach lies in the accumulation of 3D alignment errors across multiple 2D views, which can lead to inaccurate 3D segmentation results. To address this issue, we propose Dynamic Global Aligning (DGA), a technique that improves the accuracy of global multi-view alignment by focusing on difficult-to-match 3D points across images, using a dynamic adjustment function. Additionally, for real-time interactive segmentation, we introduce Multi-view Group Mapping (MGM), a method that utilizes an object mask cache to integrate multi-view segmentations and respond rapidly to user prompts. WildSeg3D demonstrates robust generalization across arbitrary scenes, thereby eliminating the need for scene-specific training. Specifically, WildSeg3D not only attains the accuracy of state-of-the-art (SOTA) methods but also achieves a $40\times$ speedup compared to existing SOTA models. Our code will be publicly available.

Low-Complexity Beamforming Design for Null Space-based Simultaneous Wireless Information and Power Transfer Systems

Simultaneous wireless information and power transfer (SWIPT) is a promising technology for the upcoming sixth-generation (6G) communication networks, enabling internet of things (IoT) devices and sensors to extend their operational lifetimes. In this paper, we propose a SWIPT scheme by projecting the interference signals from both intra-wireless information transfer (WIT) and inter-wireless energy transfer (WET) into the null space, simplifying the system into a point-to-point WIT and WET problem. Upon further analysis, we confirm that dedicated energy beamforming is unnecessary. In addition, we develop a low-complexity algorithm to solve the problem efficiently, further reducing computational overhead. Numerical results validate our analysis, showing that the computational complexity is reduced by 97.5\% and 99.96\% for the cases of $K^I = K^E = 2$, $M = 4$ and $K^I = K^E = 16$, $M = 64$, respectively.

PE3R: Perception-Efficient 3D Reconstruction

Recent advancements in 2D-to-3D perception have significantly improved the understanding of 3D scenes from 2D images. However, existing methods face critical challenges, including limited generalization across scenes, suboptimal perception accuracy, and slow reconstruction speeds. To address these limitations, we propose Perception-Efficient 3D Reconstruction (PE3R), a novel framework designed to enhance both accuracy and efficiency. PE3R employs a feed-forward architecture to enable rapid 3D semantic field reconstruction. The framework demonstrates robust zero-shot generalization across diverse scenes and objects while significantly improving reconstruction speed. Extensive experiments on 2D-to-3D open-vocabulary segmentation and 3D reconstruction validate the effectiveness and versatility of PE3R. The framework achieves a minimum 9-fold speedup in 3D semantic field reconstruction, along with substantial gains in perception accuracy and reconstruction precision, setting new benchmarks in the field. The code is publicly available at: https://github.com/hujiecpp/PE3R.

Energy-Efficient Port Selection and Beamforming Design for Integrated Data and Energy Transfer Assisted by Fluid Antennas

Integrated data and energy transfer (IDET) is considered as a key enabler of 6G, as it can provide both wireless energy transfer (WET) and wireless data transfer (WDT) services towards low power devices. Thanks to the extra degree of freedom provided by fluid antenna (FA), incorporating FA into IDET systems presents a promising approach to enhance energy efficiency performance. This paper investigates a FA assisted IDET system, where the transmitter is equipped with multiple FAs and transmits wireless signals to the data receiver (DR) and the energy receiver (ER), which are both equipped with a single traditional antenna. The switching delay and energy consumption induced by port selection are taken into account in IDET system for the first time. We aim to obtain the optimal beamforming vector and the port selection strategy at the transmitter, in order to maximize the short-term and long-term WET efficiency, respectively. The instant sub-optimal solution is obtained by alternatively optimizing the beamforming vector and port selection in each transmission frame, while a novel constrained soft actor critic (C-SAC) algorithm is proposed to find the feasible policy of port selection from the long-term perspective. Simulation results demonstrate that our scheme is able to achieve greater gain in terms of both the short-term and long-term WET efficiency compared to other benchmarks, while not degrading WDT performance.

Autoregressive Image Generation Guided by Chains of Thought

In the field of autoregressive (AR) image generation, models based on the 'next-token prediction' paradigm of LLMs have shown comparable performance to diffusion models by reducing inductive biases. However, directly applying LLMs to complex image generation can struggle with reconstructing the structure and details of the image, impacting the accuracy and stability of generation. Additionally, the 'next-token prediction' paradigm in the AR model does not align with the contextual scanning and logical reasoning processes involved in human visual perception, limiting effective image generation. Chain-of-Thought (CoT), as a key reasoning capability of LLMs, utilizes reasoning prompts to guide the model, improving reasoning performance on complex natural language process (NLP) tasks, enhancing accuracy and stability of generation, and helping the model maintain contextual coherence and logical consistency, similar to human reasoning. Inspired by CoT from the field of NLP, we propose autoregressive Image Generation with Thoughtful Reasoning (IGTR) to enhance autoregressive image generation. IGTR adds reasoning prompts without modifying the model structure or raster generation order. Specifically, we design specialized image-related reasoning prompts for AR image generation to simulate the human reasoning process, which enhances contextual reasoning by allowing the model to first perceive overall distribution information before generating the image, and improve generation stability by increasing the inference steps. Compared to the AR method without prompts, our method shows outstanding performance and achieves an approximate improvement of 20%.

Dynamic Frequency-Adaptive Knowledge Distillation for Speech Enhancement

Deep learning-based speech enhancement (SE) models have recently outperformed traditional techniques, yet their deployment on resource-constrained devices remains challenging due to high computational and memory demands. This paper introduces a novel dynamic frequency-adaptive knowledge distillation (DFKD) approach to effectively compress SE models. Our method dynamically assesses the model's output, distinguishing between high and low-frequency components, and adapts the learning objectives to meet the unique requirements of different frequency bands, capitalizing on the SE task's inherent characteristics. To evaluate the DFKD's efficacy, we conducted experiments on three state-of-the-art models: DCCRN, ConTasNet, and DPTNet. The results demonstrate that our method not only significantly enhances the performance of the compressed model (student model) but also surpasses other logit-based knowledge distillation methods specifically for SE tasks.

Separate Motion from Appearance: Customizing Motion via Customizing Text-to-Video Diffusion Models

Motion customization aims to adapt the diffusion model (DM) to generate videos with the motion specified by a set of video clips with the same motion concept. To realize this goal, the adaptation of DM should be possible to model the specified motion concept, without compromising the ability to generate diverse appearances. Thus, the key to solving this problem lies in how to separate the motion concept from the appearance in the adaptation process of DM. Typical previous works explore different ways to represent and insert a motion concept into large-scale pretrained text-to-video diffusion models, e.g., learning a motion LoRA, using latent noise residuals, etc. While those methods can encode the motion concept, they also inevitably encode the appearance in the reference videos, resulting in weakened appearance generation capability. In this paper, we follow the typical way to learn a motion LoRA to encode the motion concept, but propose two novel strategies to enhance motion-appearance separation, including temporal attention purification (TAP) and appearance highway (AH). Specifically, we assume that in the temporal attention module, the pretrained Value embeddings are sufficient to serve as basic components needed by producing a new motion. Thus, in TAP, we choose only to reshape the temporal attention with motion LoRAs so that Value embeddings can be reorganized to produce a new motion. Further, in AH, we alter the starting point of each skip connection in U-Net from the output of each temporal attention module to the output of each spatial attention module. Extensive experiments demonstrate that compared to previous works, our method can generate videos with appearance more aligned with the text descriptions and motion more consistent with the reference videos.

CharGen: High Accurate Character-Level Visual Text Generation Model with MultiModal Encoder

Recently, significant advancements have been made in diffusion-based visual text generation models. Although the effectiveness of these methods in visual text rendering is rapidly improving, they still encounter challenges such as inaccurate characters and strokes when rendering complex visual text. In this paper, we propose CharGen, a highly accurate character-level visual text generation and editing model. Specifically, CharGen employs a character-level multimodal encoder that not only extracts character-level text embeddings but also encodes glyph images character by character. This enables it to capture fine-grained cross-modality features more effectively. Additionally, we introduce a new perceptual loss in CharGen to enhance character shape supervision and address the issue of inaccurate strokes in generated text. It is worth mentioning that CharGen can be integrated into existing diffusion models to generate visual text with high accuracy. CharGen significantly improves text rendering accuracy, outperforming recent methods in public benchmarks such as AnyText-benchmark and MARIO-Eval, with improvements of more than 8% and 6%, respectively. Notably, CharGen achieved a 5.5% increase in accuracy on Chinese test sets.