Space-Time Phase Coupling in STMM-based Wireless Communications

Space-time modulated metasurfaces (STMMs) are a recently proposed generalization of reconfigurable intelligent surfaces, which include a proper time-varying phase at the metasurface elements, enabling higher flexibility and control of the reflected signals. The spatial component can be designed to control the direction of reflection, while the temporal one can be adjusted to change the frequency of the reflected signal or to convey information. However, the coupling between the spatial and temporal phases at the STMM can adversely affect its performance. Therefore, this paper analyzes the system parameters that affect the space-time coupling. Furthermore, two methods for space-time decoupling are investigated. Numerical results highlight the effectiveness of the proposed decoupling methods and reveal that the space-time phase coupling increases with the bandwidth of the temporal phase, the size of the STMM, and with grazing angles of incidence onto the STMM.

Optimization of RIS-aided SISO Systems Based on a Mutually Coupled Loaded Wire Dipole Model

The electromagnetic (EM) features of reconfigurable intelligent surfaces (RISs) fundamentally determine their operating principles and performance. Motivated by these considerations, we study a single-input single-output (SISO) system in the presence of an RIS, which is characterized by a circuit-based EM-compliant model. Specifically, we model the RIS as a collection of thin wire dipoles controlled by tunable load impedances, and we propose a gradient-based algorithm for calculating the optimal impedances of the scattering elements of the RIS in the presence of mutual coupling. Furthermore, we prove the convergence of the proposed algorithm and derive its computational complexity in terms of number of complex multiplications. Numerical results show that the proposed algorithm provides better performance than a benchmark algorithm and that it converges in a shorter amount of time.

Low Complexity Optimization for Line-of-Sight RIS-Aided Holographic Communications

The synergy of metasurface-based holographic surfaces (HoloS) and reconfigurable intelligent surfaces (RIS) is considered a key aspect for future communication networks. However, the optimization of dynamic metasurfaces requires the use of numerical algorithms, for example, based on the singular value decomposition (SVD) and gradient descent methods, which are usually computationally intensive, especially when the number of elements is large. In this paper, we analyze low complexity designs for RIS-aided HoloS communication systems, in which the configurations of the HoloS transmitter and the RIS are given in a closed-form expression. We consider implementations based on diagonal and non-diagonal RISs. Over line-of-sight channels, we show that the proposed schemes provide performance that is close to that offered by complex numerical methods.

Reconfigurable Intelligent Surfaces: Interplay of Unit-Cell- and Surface-Level Design and Performance under Quantifiable Benchmarks

The ability of reconfigurable intelligent surfaces (RIS) to produce complex radiation patterns in the far-field is determined by various factors, such as the unit-cell's size, shape, spatial arrangement, tuning mechanism, the communication and control circuitry's complexity, and the illuminating source's type (point/planewave). Research on RIS has been mainly focused on two areas: first, the optimization and design of unit-cells to achieve desired electromagnetic responses within a specific frequency band; and second, exploring the applications of RIS in various settings, including system-level performance analysis. The former does not assume any specific radiation pattern on the surface level, while the latter does not consider any particular unit-cell design. Both approaches largely ignore the complexity and power requirements of the RIS control circuitry. As we progress towards the fabrication and use of RIS in real-world settings, it is becoming increasingly necessary to consider the interplay between the unit-cell design, the required surface-level radiation patterns, the control circuit's complexity, and the power requirements concurrently. In this paper, a benchmarking framework for RIS is employed to compare performance and analyze tradeoffs between the unit-cell's specified radiation patterns and the control circuit's complexity for far-field beamforming, considering different diode-based unit-cell designs for a given surface size. This work lays the foundation for optimizing the design of the unit-cells and surface-level radiation patterns, facilitating the optimization of RIS-assisted wireless communication systems.

Energy Efficiency in RIS-Aided Wireless Networks: Active or Passive RIS?

This work addresses the comparison between active and passive RISs in wireless networks, with reference to the system energy efficiency (EE). To provably convergent and computationally-friendly EE maximization algorithms are developed, which optimize the reflection coefficients of the RIS, the transmit powers, and the linear receive filters. Numerical results show the performance of the proposed methods and discuss the operating points in which active or passive RISs should be preferred from an energy-efficient perspective.

Energy Efficiency Maximization in RIS-Aided Networks with Global Reflection Constraints

This work addresses the issue of energy efficiency maximization in a multi-user network aided by reconfigurable intelligent surface (RIS) with global reflection capabilities. Two optimization methods are proposed to optimize the mobile users' powers, the RIS coefficients and the linear receive filters. Both methods are provably convergent and require only the solution of convex optimization problems. The numerical results show that the proposed methods largely outperform heuristic resource allocation schemes.

Joint Beamforming for RIS-Assisted Integrated Sensing and Communication Systems

Integrated sensing and communications (ISAC) is emerging as a critical technique for next-generation communication systems. Reconfigurable intelligent surface (RIS) can simultaneously enhance the performance of communication and sensing by introducing new degrees-of-freedom for beamforming in ISAC systems. This paper proposes two optimization techniques for joint beamforming in RIS-assisted ISAC systems. We first aim to maximize the radar mutual information (MI) by imposing constraints on communication rate, transmit power, and unit modulus reflection coefficients at the RIS. An alternating optimization (AO) algorithm based on the semidefinite relaxation (SDR) method is proposed to solve the optimization problem by introducing a convergence-accelerating method. To achieve lower computational complexity and better reliability, we then formulate a new optimization problem for maximizing the weighted ISAC performance metrics under fewer constraints. An AO algorithm based on the Riemannian gradient (RG) method is proposed to solve this problem. This is achieved by reformulating the transmit and RIS beamforming on the complex hypersphere manifold and complex circle manifold, respectively. Numerical results show that the proposed algorithms can enhance the radar MI and the weighted communication rate simultaneously. The AO algorithm based on RG exhibits better performance than the SDR-based method.

ARES: Autonomous RIS solution with Energy harvesting and Self-configuration towards 6G

Reconfigurable Intelligent Surfaces (RISs) are expected to play a crucial role in reaching the key performance indicators (KPIs) for future 6G networks. Their competitive edge over conventional technologies lies in their ability to control the wireless environment propagation properties at will, thus revolutionizing the traditional communication paradigm that perceives the communication channel as an uncontrollable black box. As RISs transition from research to market, practical deployment issues arise. Major roadblocks for commercially viable RISs are i) the need for a fast and complex control channel to adapt to the ever-changing wireless channel conditions, and ii) an extensive grid to supply power to each deployed RIS. In this paper, we question the established RIS practices and propose a novel RIS design combining self-configuration and energy self-sufficiency capabilities. We analyze the feasibility of devising fully-autonomous RISs that can be easily and seamlessly installed throughout the environment, following the new Internet-of-Surfaces (IoS) paradigm, requiring modifications neither to the deployed mobile network nor to the power distribution system. In particular, we introduce ARES, an Autonomous RIS with Energy harvesting and Self-configuration solution. ARES achieves outstanding communication performance while demonstrating the feasibility of energy harvesting (EH) for RISs power supply in future deployments.

On the Road to 6G: Visions, Requirements, Key Technologies and Testbeds

Fifth generation (5G) mobile communication systems have entered the stage of commercial development, providing users with new services and improved user experiences as well as offering a host of novel opportunities to various industries. However, 5G still faces many challenges. To address these challenges, international industrial, academic, and standards organizations have commenced research on sixth generation (6G) wireless communication systems. A series of white papers and survey papers have been published, which aim to define 6G in terms of requirements, application scenarios, key technologies, etc. Although ITU-R has been working on the 6G vision and it is expected to reach a consensus on what 6G will be by mid-2023, the related global discussions are still wide open and the existing literature has identified numerous open issues. This paper first provides a comprehensive portrayal of the 6G vision, technical requirements, and application scenarios, covering the current common understanding of 6G. Then, a critical appraisal of the 6G network architecture and key technologies is presented. Furthermore, existing testbeds and advanced 6G verification platforms are detailed for the first time. In addition, future research directions and open challenges are identified for stimulating the on-going global debate. Finally, lessons learned to date concerning 6G networks are discussed.