Waveform Design for OFDM-based ISAC Systems Under Resource Occupancy Constraint

Integrated Sensing and Communication (ISAC) is one of the key pillars envisioned for 6G wireless systems. ISAC systems combine communication and sensing functionalities over a single waveform, with full resource sharing. In particular, waveform design for legacy Orthogonal Frequency Division Multiplexing (OFDM) systems consists of a suitable time-frequency resource allocation policy balancing between communication and sensing performance. Over time and/or frequency, having unused resources leads to an ambiguity function with high sidelobes that significantly affect the performance of ISAC for OFDM waveforms. This paper proposes an OFDM-based ISAC waveform design that takes into account communication and resource occupancy constraints. The proposed method minimizes the Cram\'er-Rao Bound (CRB) on delay and Doppler estimation for two closely spaced targets. Moreover, the paper addresses the under-sampling issue by interpolating the estimated sensing channel based on matrix completion via Schatten $p$-norm approximation. Numerical results show that the proposed waveform outperforms the state-of-the-art methods.

Time-Modulated Intelligent Reflecting Surface for Waveform Security

We consider an OFDM transmitter aided by an intelligent reflecting surface (IRS) and propose a novel approach to enhance waveform security by employing time modulation (TM) at the IRS side. By controlling the periodic TM pattern of the IRS elements, the system is designed to preserve communication information towards an authorized recipient and scramble the information towards all other directions. We introduce two modes of TM pattern control: the linear mode, in which we design common TM parameters for entire rows or columns of the IRS, and the planar mode, where we design TM parameters for each individual IRS unit. Due to the required fewer switches, the linear mode is easier to implement as compared to the planar mode. However, the linear model results in a beampattern that has sidelobes, over which the transmitted information is not sufficiently scrambled. We show that the sidelobes of the linear mode can be suppressed by exploiting the high diversity available in that mode.

Enhance Security of Time-Modulated Array-Enabled Directional Modulation by Introducing Symbol Ambiguity

In this paper, if the time-modulated array (TMA)-enabled directional modulation (DM) communication system can be cracked is investigated and the answer is YES! We first demonstrate that the scrambling data received at the eavesdropper can be defied by using grid search to successfully find the only and actual mixing matrix generated by TMA. Then, we propose introducing symbol ambiguity to TMA to defend the defying of grid search, and design two principles for the TMA mixing matrix, i.e., rank deficiency and non-uniqueness of the ON-OFF switching pattern, that can be used to construct the symbol ambiguity. Also, we present a feasible mechanism to implement these two principles. Our proposed principles and mechanism not only shed light on how to design a more secure TMA DM system theoretically in the future, but also have been validated to be effective by bit error rate measurements.

How secure is the time-modulated array-enabled ofdm directional modulation?

Time-modulated arrays (TMA) transmitting orthogonal frequency division multiplexing (OFDM) waveforms achieve physical layer security by allowing the signal to reach the legitimate destination undistorted, while making the signal appear scrambled in all other directions. In this paper, we examine how secure the TMA OFDM system is, and show that it is possible for the eavesdropper to defy the scrambling. In particular, we show that, based on the scrambled signal, the eavesdropper can formulate a blind source separation problem and recover data symbols and TMA parameters via independent component analysis (ICA) techniques. We show how the scaling and permutation ambiguities arising in ICA can be resolved by exploiting the Toeplitz structure of the corresponding mixing matrix, and knowledge of data constellation, OFDM specifics, and the rules for choosing TMA parameters. We also introduce a novel TMA implementation to defend the scrambling against the eavesdropper.

An IRS-Assisted Secure Dual-Function Radar-Communication System

In dual-function radar-communication (DFRC) systems the probing signal contains information intended for the communication users, which makes that information vulnerable to eavesdropping by the targets. We propose a novel design for enhancing the physical layer security (PLS) of DFRC systems, via the help of intelligent reflecting surface (IRS) and artificial noise (AN), transmitted along with the probing waveform. The radar waveform, the AN jamming noise and the IRS parameters are designed to optimize the communication secrecy rate while meeting radar signal-to-noise ratio (SNR) constrains. Key challenges in the resulting optimization problem include the fractional form objective, the SNR being a quartic function of the IRS parameters, and the unit-modulus constraint of the IRS parameters. A fractional programming technique is used to transform the fractional form objective of the optimization problem into more tractable non-fractional polynomials. Numerical results are provided to demonstrate the convergence of the proposed system design algorithm, and also show the impact of the power assigned to the AN on the secrecy performance of the designed system.

Enhanced Channel Estimation in mm-Wave MIMO Systems Leveraging Integrated Communication and Sensing

This paper tackles the challenge of wideband MIMO channel estimation within indoor millimeter-wave scenarios. Our proposed approach exploits the integrated sensing and communication paradigm, where sensing information aids in channel estimation. The key innovation consists of employing both spatial and temporal sensing modes to significantly reduce the number of required training pilots. Moreover, our algorithm addresses and corrects potential mismatches between sensing and communication modes, which can arise from differing sensing and communication propagation paths. Extensive simulations demonstrate that the proposed method requires 4x less pilots compared to the current state-of-the-art, marking a substantial advancement in channel estimation efficiency.

Efficient Beamforming Designs for IRS-Aided DFRC Systems

This short tutorial presents several ideas for designing dual function radar communication (DFRC) systems aided by intelligent reflecting surfaces (IRS). These problems are highly nonlinear in the IRS parameter matrix, and further, the IRS parameters are subject to non-convex unit modulus constraints. We present classical semidefinite relaxation based methods, low-complexity minorization based optimization methods, low-complexity Riemannian manifold optimization methods, and near optimal branch and bound based methods.

Minorization-based Low-Complexity Design for IRS-Aided ISAC Systems

A low-complexity design is proposed for an integrated sensing and communication (ISAC) system aided by an intelligent reflecting surface (IRS). The radar precoder and IRS parameter are computed alternatingly to maximize the weighted sum signal-to-noise ratio (SNR) at the radar and communication receivers. The IRS design problem has an objective function of fourth order in the IRS parameter matrix, and is subject to highly non-convex unit modulus constraints. To address this challenging problem and obtain a low-complexity solution, we employ a minorization technique twice; the original fourth order objective is first surrogated with a quadratic one via minorization, and is then minorized again to a linear one. This leads to a closed form solution for the IRS parameter in each iteration, thus reducing the IRS design complexity. Numerical results are presented to show the effectiveness of the proposed method.

A Secure Dual-Function Radar Communication System via Time-Modulated Arrays

Dual-function radar-communication (DFRC) systems offer high spectral, hardware and power efficiency, as such are prime candidates for 6G wireless systems. DFRC systems use the same waveform for simultaneously probing the surroundings and communicating with other equipment. By exposing the communication information to potential targets, DFRC systems are vulnerable to eavesdropping. In this work, we propose to mitigate the problem by leveraging directional modulation (DM) enabled by a time-modulated array (TMA) that transmits OFDM waveforms. DM can scramble the signal in all directions except the directions of the legitimate user. However, the signal reflected by the targets is also scrambled, thus complicating the extraction of target parameters. We propose a novel, low-complexity target estimation method that estimates the target parameters based on the scrambled received symbols. We also propose a novel method to refine the obtained target estimates at the cost of increased complexity. With the proposed refinement algorithm, the proposed DFRC system can securely communicate with users while having high-precision sensing functionality.

Dual-Function Radar-Communication System Aided by Intelligent Reflecting Surfaces

We propose a novel design of a dual-function radar communication (DFRC) system aided by an Intelligent Reflecting Surface (IRS). We consider a scenario with one target and multiple communication receivers, where there is no line-of-sight between the radar and the target. The radar precoding matrix and the IRS weights are optimally designed to maximize the weighted sum of the signal-to-noise ratio (SNR) at the radar receiver and the SNR at the communication receivers subject to power constraints and constant modulus constraints on the IRS weights. The problem is decoupled into two sub-problems, namely, waveform design and IRS weight design, and is solved via alternating optimization. The former subproblem is solved via linear programming, and the latter via manifold optimization with a quartic polynomial objective. The key contribution of this paper lies in solving the IRS weight design sub-problem that is based on the optimization of a quartic objective function in the IRS weights, and is subject to unit modulus-constraint on the IRS weights. Simulation results are provided to show the convergence behavior of the proposed algorithm under different system configurations, and the effectiveness of using IRS to improve radar and communication performance.