In this paper, we focus on improving autonomous driving safety via task offloading from cellular vehicles (CVs), using vehicle-to-infrastructure (V2I) links, to an multi-access edge computing (MEC) server. Considering that the frequencies used for V2I links can be reused for vehicle-to-vehicle (V2V) communications to improve spectrum utilization, the receiver of each V2I link may suffer from severe interference, causing outages in the task offloading process. To tackle this issue, we propose the deployment of a reconfigurable intelligent computational surface (RICS) to enable, not only V2I reflective links, but also interference cancellation at the V2V links exploiting the computational capability of its metamaterials. We devise a joint optimization formulation for the task offloading ratio between the CVs and the MEC server, the spectrum sharing strategy between V2V and V2I communications, as well as the RICS reflection and refraction matrices, with the objective to maximize a safety-based autonomous driving task. Due to the non-convexity of the problem and the coupling among its free variables, we transform it into a more tractable equivalent form, which is then decomposed into three sub-problems and solved via an alternate approximation method. Our simulation results demonstrate the effectiveness of the proposed RICS optimization in improving the safety in autonomous driving networks.
The envisioned wireless networks of the future entail the provisioning of massive numbers of connections, heterogeneous data traffic, ultra-high spectral efficiency, and low latency services. This vision is spurring research activities focused on defining a next generation multiple access (NGMA) protocol that can accommodate massive numbers of users in different resource blocks, thereby, achieving higher spectral efficiency and increased connectivity compared to conventional multiple access schemes. In this article, we present a multiple access scheme for NGMA in wireless communication systems assisted by multiple reconfigurable intelligent surfaces (RISs). In this regard, considering the practical scenario of static users operating together with mobile ones, we first study the interplay of the design of NGMA schemes and RIS phase configuration in terms of efficiency and complexity. Based on this, we then propose a multiple access framework for RIS-assisted communication systems, and we also design a medium access control (MAC) protocol incorporating RISs. In addition, we give a detailed performance analysis of the designed RIS-assisted MAC protocol. Our extensive simulation results demonstrate that the proposed MAC design outperforms the benchmarks in terms of system throughput and access fairness, and also reveal a trade-off relationship between the system throughput and fairness.
Computation offloading has become a popular solution to support computationally intensive and latency-sensitive applications by transferring computing tasks to mobile edge servers (MESs) for execution, which is known as mobile/multi-access edge computing (MEC). To improve the MEC performance, it is required to design an optimal offloading strategy that includes offloading decision (i.e., whether offloading or not) and computational resource allocation of MEC. The design can be formulated as a mixed-integer nonlinear programming (MINLP) problem, which is generally NP-hard and its effective solution can be obtained by performing online inference through a well-trained deep neural network (DNN) model. However, when the system environments change dynamically, the DNN model may lose efficacy due to the drift of input parameters, thereby decreasing the generalization ability of the DNN model. To address this unique challenge, in this paper, we propose a multi-head ensemble multi-task learning (MEMTL) approach with a shared backbone and multiple prediction heads (PHs). Specifically, the shared backbone will be invariant during the PHs training and the inferred results will be ensembled, thereby significantly reducing the required training overhead and improving the inference performance. As a result, the joint optimization problem for offloading decision and resource allocation can be efficiently solved even in a time-varying wireless environment. Experimental results show that the proposed MEMTL outperforms benchmark methods in both the inference accuracy and mean square error without requiring additional training data.
The envisioned sixth-generation (6G) of wireless networks will involve an intelligent integration of communications and computing, thereby meeting the urgent demands of diverse applications. To realize the concept of the smart radio environment, reconfigurable intelligent surfaces (RISs) are a promising technology for offering programmable propagation of impinging electromagnetic signals via external control. However, the purely reflective nature of conventional RISs induces significant challenges in supporting computation-based applications, e.g., wave-based calculation and signal processing. To fulfil future communication and computing requirements, new materials are needed to complement the existing technologies of metasurfaces, enabling further diversification of electronics and their applications. In this event, we introduce the concept of reconfigurable intelligent computational surface (RICS), which is composed of two reconfigurable multifunctional layers: the `reconfigurable beamforming layer' which is responsible for tunable signal reflection, absorption, and refraction, and the `intelligence computation layer' that concentrates on metamaterials-based computing. By exploring the recent trends on computational metamaterials, RICSs have the potential to make joint communication and computation a reality. We further demonstrate two typical applications of RICSs for performing wireless spectrum sensing and secrecy signal processing. Future research challenges arising from the design and operation of RICSs are finally highlighted.
In the sixth-generation (6G) era, emerging large-scale computing based applications (for example processing enormous amounts of images in real-time in autonomous driving) tend to lead to excessive energy consumption for the end users, whose devices are usually energy-constrained. In this context, energy-efficiency becomes a critical challenge to be solved for harnessing these promising applications to realize 'green' 6G networks. As a remedy, reconfigurable intelligent surfaces (RIS) have been proposed for improving the energy efficiency by beneficially reconfiguring the wireless propagation environment. In conventional RIS solutions, however, the received signal-to-interference-plus-noise ratio (SINR) sometimes may even become degraded. This is because the signals impinging upon an RIS are typically contaminated by interfering signals which are usually dynamic and unknown. To address this issue, `learning' the properties of the surrounding spectral environment is a promising solution, motivating the convergence of artificial intelligence and spectrum sensing, termed here as spectrum learning (SL). Inspired by this, we develop an SL-aided RIS framework for intelligently exploiting the inherent characteristics of the radio frequency (RF) spectrum for green 6G networks. Given the proposed framework, the RIS controller becomes capable of intelligently `{think-and-decide}' whether to reflect or not the incident signals. Therefore, the received SINR can be improved by dynamically configuring the binary ON-OFF status of the RIS elements. The energy-efficiency benefits attained are validated with the aid of a specific case study. Finally, we conclude with a list of promising future research directions.
Space information networks (SIN) are facing an ever-increasing thirst for high-speed and high-capacity seamless data transmission due to the integration of ground, air, and space communications. However, this imposes a new paradigm on the architecture design of the integrated SIN. Recently, reconfigurable intelligent surfaces (RISs) and mobile edge computing (MEC) are the most promising techniques, conceived to improve communication and computation capability by reconfiguring the wireless propagation environment and offloading. Hence, converging RISs and MEC in SIN is becoming an effort to reap the double benefits of computation and communication. In this article, we propose an RIS-assisted collaborative MEC architecture for SIN and discuss its implementation. Then we present its potential benefits, major challenges, and feasible applications. Subsequently, we study different cases to evaluate the system data rate and latency. Finally, we conclude with a list of open issues in this research area.
In this paper, we propose a transfer learning (TL)-enabled edge-CNN framework for 5G industrial edge networks with privacy-preserving characteristic. In particular, the edge server can use the existing image dataset to train the CNN in advance, which is further fine-tuned based on the limited datasets uploaded from the devices. With the aid of TL, the devices that are not participating in the training only need to fine-tune the trained edge-CNN model without training from scratch. Due to the energy budget of the devices and the limited communication bandwidth, a joint energy and latency problem is formulated, which is solved by decomposing the original problem into an uploading decision subproblem and a wireless bandwidth allocation subproblem. Experiments using ImageNet demonstrate that the proposed TL-enabled edge-CNN framework can achieve almost 85% prediction accuracy of the baseline by uploading only about 1% model parameters, for a compression ratio of 32 of the autoencoder.
Reconfigurable intelligent surface (RIS) is a promising reflective radio technology for improving the coverage and rate of future wireless systems by reconfiguring the wireless propagation environment. The current work mainly focuses on the physical layer design of RIS. However, enabling multiple devices to communicate with the assistance of RIS is a crucial challenging problem. Motivated by this, we explore RIS-assisted communications at the medium access control (MAC) layer and propose an RIS-assisted MAC framework. In particular, RISassisted transmissions are implemented by pre-negotiation and a multi-dimension reservation (MDR) scheme. Based on this, we investigate RIS-assisted single-channel multi-user (SCMU) communications. Wherein the RIS regarded as a whole unity can be reserved by one user to support the multiple data transmissions, thus achieving high efficient RIS-assisted connections at the user. Moreover, under frequency-selective channels, implementing the MDR scheme on the RIS group division, RISassisted multi-channel multi-user (MCMU) communications are further explored to improve the service efficiency of the RIS and decrease the computation complexity. Besides, a Markov chain is built based on the proposed RIS-assisted MAC framework to analyze the system performance of SCMU/MCMU. Then the optimization problem is formulated to maximize the overall system capacity of SCMU/MCMU with energy-efficient constraint. The performance evaluations demonstrate the feasibility and effectiveness of each
Reconfigurable intelligent surface (RIS) has become a promising technology for enhancing the reliability of wireless communications, which is capable of reflecting the desired signals through appropriate phase shifts. However, the intended signals that impinge upon an RIS are often mixed with interfering signals, which are usually dynamic and unknown. In particular, the received signal-to-interference-plus-noise ratio (SINR) may be degraded by the signals reflected from the RISs that originate from non-intended users. To tackle this issue, we introduce the concept of intelligent spectrum learning (ISL), which uses an appropriately trained convolutional neural network (CNN) at the RIS controller to help the RISs infer the interfering signals directly from the incident signals. By capitalizing on the ISL, a distributed control algorithm is proposed to maximize the received SINR by dynamically configuring the active/inactive binary status of the RIS elements. Simulation results validate the performance improvement offered by deep learning and demonstrate the superiority of the proposed ISL-aided approach.
The empowering unmanned aerial vehicles (UAVs) have been extensively used in providing intelligence such as target tracking. In our field experiments, a pre-trained convolutional neural network (CNN) is deployed at the UAV to identify a target (a vehicle) from the captured video frames and enable the UAV to keep tracking. However, this kind of visual target tracking demands a lot of computational resources due to the desired high inference accuracy and stringent delay requirement. This motivates us to consider offloading this type of deep learning (DL) tasks to a mobile edge computing (MEC) server due to limited computational resource and energy budget of the UAV, and further improve the inference accuracy. Specifically, we propose a novel hierarchical DL tasks distribution framework, where the UAV is embedded with lower layers of the pre-trained CNN model, while the MEC server with rich computing resources will handle the higher layers of the CNN model. An optimization problem is formulated to minimize the weighted-sum cost including the tracking delay and energy consumption introduced by communication and computing of the UAVs, while taking into account the quality of data (e.g., video frames) input to the DL model and the inference errors. Analytical results are obtained and insights are provided to understand the tradeoff between the weighted-sum cost and inference error rate in the proposed framework. Numerical results demonstrate the effectiveness of the proposed offloading framework.