A Two-Stage ISAC Framework for Low-Altitude Economy Based on 5G NR Signals

The evolution of next-generation wireless networks has spurred the vigorous development of the low-altitude economy (LAE). To support this emerging field while remaining compatible with existing network architectures, integrated sensing and communication (ISAC) based on 5G New Radio (NR) signals is regarded as a promising solution. However, merely leveraging standard 5G NR signals, such as the Synchronization Signal Block (SSB), presents fundamental limitations in sensing resolution. To address the issue, this paper proposes a two-stage coarse-to-fine sensing framework that utilizes standard 5G NR initial access signals augmented by a custom-designed sparse pilot structure (SPS) for high-precision unmanned aerial vehicles (UAV) sensing. In Stage I, we first fuse information from the SSB, Type\#0-PDCCH, and system information block 1 (SIB1) to ensure the initial target detection. In Stage II, a refined estimation algorithm is introduced to overcome the resolution limitations of these signals. Inspired by the sparse array theory, this stage employs a novel SPS, which is inserted into resource blocks (RBs) within the CORSET\#0 bandwidth. To accurately extract the off-grid range and velocity parameters from these sparse pilots, we develop a corresponding high-resolution algorithm based on the weighted unwrapped phase (WUP) technique and the RELAX-based iterative method. Finally, the density-based spatial clustering of applications with noise (DBSCAN) algorithm is adopted to prune the redundant detections arising from beam overlap. Comprehensive simulation results demonstrate the superior estimation accuracy and computational efficiency of the proposed framework in comparison to other techniques.

4D Imaging in ISAC Systems: A Framework Based on 5G NR Downlink Signals

Integrated sensing and communication (ISAC) has emerged as a key enabler for sixth-generation (6G) wireless networks, supporting spectrum sharing and hardware integration. Beyond communication enhancement, ISAC also enables high-accuracy environment reconstruction and imaging, which are crucial for applications such as autonomous driving and digital twins. This paper proposes a 4D imaging framework fully compliant with the 5G New Radio (NR) protocol, ensuring compatibility with cellular systems. Specifically, we develop an end-to-end processing chain that covers waveform generation, echo processing, and multi-BS point cloud fusion. Furthermore, we introduce Zoom-OMP, a coarse-to-fine sparse recovery algorithm for high-resolution angle estimation that achieves high accuracy with reduced computational cost. The simulation results demonstrate that the proposed framework achieves robust 4D imaging performance with superior spatial accuracy and reconstruction quality compared to conventional benchmarks, paving the way for practical ISAC-enabled environment reconstruction in 6G networks.

BFM-Zero: A Promptable Behavioral Foundation Model for Humanoid Control Using Unsupervised Reinforcement Learning

Building Behavioral Foundation Models (BFMs) for humanoid robots has the potential to unify diverse control tasks under a single, promptable generalist policy. However, existing approaches are either exclusively deployed on simulated humanoid characters, or specialized to specific tasks such as tracking. We propose BFM-Zero, a framework that learns an effective shared latent representation that embeds motions, goals, and rewards into a common space, enabling a single policy to be prompted for multiple downstream tasks without retraining. This well-structured latent space in BFM-Zero enables versatile and robust whole-body skills on a Unitree G1 humanoid in the real world, via diverse inference methods, including zero-shot motion tracking, goal reaching, and reward optimization, and few-shot optimization-based adaptation. Unlike prior on-policy reinforcement learning (RL) frameworks, BFM-Zero builds upon recent advancements in unsupervised RL and Forward-Backward (FB) models, which offer an objective-centric, explainable, and smooth latent representation of whole-body motions. We further extend BFM-Zero with critical reward shaping, domain randomization, and history-dependent asymmetric learning to bridge the sim-to-real gap. Those key design choices are quantitatively ablated in simulation. A first-of-its-kind model, BFM-Zero establishes a step toward scalable, promptable behavioral foundation models for whole-body humanoid control.

Learning Gentle Humanoid Locomotion and End-Effector Stabilization Control

Can your humanoid walk up and hand you a full cup of beer, without spilling a drop? While humanoids are increasingly featured in flashy demos like dancing, delivering packages, traversing rough terrain, fine-grained control during locomotion remains a significant challenge. In particular, stabilizing a filled end-effector (EE) while walking is far from solved, due to a fundamental mismatch in task dynamics: locomotion demands slow-timescale, robust control, whereas EE stabilization requires rapid, high-precision corrections. To address this, we propose SoFTA, a Slow-Fast TwoAgent framework that decouples upper-body and lower-body control into separate agents operating at different frequencies and with distinct rewards. This temporal and objective separation mitigates policy interference and enables coordinated whole-body behavior. SoFTA executes upper-body actions at 100 Hz for precise EE control and lower-body actions at 50 Hz for robust gait. It reduces EE acceleration by 2-5x relative to baselines and performs much closer to human-level stability, enabling delicate tasks such as carrying nearly full cups, capturing steady video during locomotion, and disturbance rejection with EE stability.

FACET: Force-Adaptive Control via Impedance Reference Tracking for Legged Robots

Reinforcement learning (RL) has made significant strides in legged robot control, enabling locomotion across diverse terrains and complex loco-manipulation capabilities. However, the commonly used position or velocity tracking-based objectives are agnostic to forces experienced by the robot, leading to stiff and potentially dangerous behaviors and poor control during forceful interactions. To address this limitation, we present \emph{Force-Adaptive Control via Impedance Reference Tracking} (FACET). Inspired by impedance control, we use RL to train a control policy to imitate a virtual mass-spring-damper system, allowing fine-grained control under external forces by manipulating the virtual spring. In simulation, we demonstrate that our quadruped robot achieves improved robustness to large impulses (up to 200 Ns) and exhibits controllable compliance, achieving an 80% reduction in collision impulse. The policy is deployed to a physical robot to showcase both compliance and the ability to engage with large forces by kinesthetic control and pulling payloads up to 2/3 of its weight. Further extension to a legged loco-manipulator and a humanoid shows the applicability of our method to more complex settings to enable whole-body compliance control. Project Website: https://egalahad.github.io/facet/

On Scaling Up 3D Gaussian Splatting Training

3D Gaussian Splatting (3DGS) is increasingly popular for 3D reconstruction due to its superior visual quality and rendering speed. However, 3DGS training currently occurs on a single GPU, limiting its ability to handle high-resolution and large-scale 3D reconstruction tasks due to memory constraints. We introduce Grendel, a distributed system designed to partition 3DGS parameters and parallelize computation across multiple GPUs. As each Gaussian affects a small, dynamic subset of rendered pixels, Grendel employs sparse all-to-all communication to transfer the necessary Gaussians to pixel partitions and performs dynamic load balancing. Unlike existing 3DGS systems that train using one camera view image at a time, Grendel supports batched training with multiple views. We explore various optimization hyperparameter scaling strategies and find that a simple sqrt(batch size) scaling rule is highly effective. Evaluations using large-scale, high-resolution scenes show that Grendel enhances rendering quality by scaling up 3DGS parameters across multiple GPUs. On the Rubble dataset, we achieve a test PSNR of 27.28 by distributing 40.4 million Gaussians across 16 GPUs, compared to a PSNR of 26.28 using 11.2 million Gaussians on a single GPU. Grendel is an open-source project available at: https://github.com/nyu-systems/Grendel-GS