A High-Level Comparison of Recent Technologies for Massive MIMO Architectures

Since the introduction of massive MIMO (mMIMO), the design of a transceiver with feasible complexity has been a challenging problem. Initially, it was believed that the main issue in this respect is the overall RF-cost. However, as mMIMO is becoming more and more a key technology for future wireless networks, it is realized, that the RF-cost is only one of many implementational challenges and design trade-offs. In this paper, we present, analyze and compare various novel mMIMO architectures, considering recent emerging technologies such as intelligent surface-assisted and Rotman lens based architectures. These are compared to the conventional fully digital (FD) and hybrid analog-digital beamforming (HADB) approaches. To enable a fair comparison, we account for various hardware imperfections and losses and utilize a novel, universal algorithm for signal precoding. Based on our thorough investigations, we draw a generic efficiency to quality trade-off for various mMIMO architectures. We find that in a typical cellular communication setting the reflect/transmit array based architectures sketch the best overall trade-off. Further, we show that in a qualitative ranking the power efficiency of the considered architectures is independent of the frequency range.

Codebook-Based User Tracking in IRS-Assisted mmWave Communication Networks

In this paper, we present a novel mobile user tracking (UT) scheme for codebook-based intelligent reflecting surface (IRS) aided millimeter wave (mmWave) systems. The proposed UT scheme exploits the temporal correlation of the direction from the IRS to the mobile user for selecting IRS phase shifts that provide reflection towards the user. To this end, the user's direction is periodically estimated based on a generalized likelihood ratio test (GLRT) and the user's movement trajectory is extrapolated from several past direction estimates. The efficiency of the proposed UT scheme is evaluated in terms of the average effective rate, which accounts for both the required signaling overhead and the achieved signal to noise ratio (SNR). Our results show that for medium to high SNR, the proposed codebook based UT scheme achieves a higher effective rate than two reference approaches based on full codebook search and optimization of the individual IRS unit cells, respectively.

Codebook Based Two-Time Scale Resource Allocation Design for IRS-Assisted eMBB-URLLC Systems

This paper investigates the resource allocation algorithm design for wireless systems assisted by large intelligent reflecting surfaces (IRSs) with coexisting enhanced mobile broadband (eMBB) and ultra reliable low-latency communication (URLLC) users. We consider a two-time scale resource allocation scheme, whereby the base station's precoders are optimized in each mini-slot to adapt to newly arriving URLLC traffic, whereas the IRS phase shifts are reconfigured only in each time slot to avoid excessive base station-IRS signaling. To facilitate efficient resource allocation design for large IRSs, we employ a codebook-based optimization framework, where the IRS is divided into several tiles and the phase-shift elements of each tile are selected from a pre-defined codebook. The resource allocation algorithm design is formulated as an optimization problem for the maximization of the average sum data rate of the eMBB users over a time slot while guaranteeing the quality-of-service (QoS) of each URLLC user in each mini-slot. An iterative algorithm based on alternating optimization (AO) is proposed to find a high-quality suboptimal solution. As a case study, the proposed algorithm is applied in an industrial indoor environment modelled via the Quadriga channel simulator. Our simulation results show that the proposed algorithm design enables the coexistence of eMBB and URLLC users and yields large performance gains compared to three baseline schemes. Furthermore, our simulation results reveal that the proposed two-time scale resource allocation design incurs only a small performance loss compared to the case when the IRSs are optimized in each mini-slot.

RIS Assisted Device Activity Detection with Statistical Channel State Information

This paper studies reconfigurable intelligent surface (RIS) assisted device activity detection for grant-free (GF) uplink transmission in wireless communication networks. In particular, we consider mobile devices located in an area where the direct link to an access point (AP) is blocked. Thus, the devices try to connect to the AP via a reflected link provided by an RIS. Therefore, a RIS phase-shift design is desired that covers the entire blocked area with a wide reflection beam because the exact locations and times of activity of the devices are unknown in GF transmission. In order to study the impact of the phase-shift design on the device activity detection, we derive a generalized likelihood ratio test (GLRT) based detector and present an analytical expression for the probability of detection. Assuming knowledge of statistical CSI, we formulate an optimization problem for the phase-shift design for maximization of the guaranteed probability of detection for all locations within a given coverage area. To tackle the non-convexity of the problem, we propose two different approximations of the objective function. The first approximation leads to a design that aims to reduce the variations of the end-to-end channel while taking system parameters such as transmit power, noise power, and probability of false alarm into account. The second approximation can be adopted for versatile RIS deployments because it only depends on the line-of-sight component of the end-to-end channel and is not affected by system parameters. For comparison, we also consider a phase-shift design maximizing the average channel gain and a baseline analytical phase-shift design for large blocked areas. Our performance evaluation shows that the proposed approximations result in phase-shift designs that guarantee high probability of detection across the coverage area and outperform the baseline designs.

Power Scaling Law for Optical IRSs and Comparison with Optical Relays

The line-of-sight (LOS) requirement of free-space optical (FSO) systems can be relaxed by employing optical relays and optical intelligent reflecting surfaces (IRSs). Unlike radio frequency (RF) IRSs, which typically exhibit a quadratic power scaling law, the power reflected from FSO IRSs and collected at the receiver lens may scale quadratically or linearly with the IRS size or may even saturate at a constant value. We analyze the power scaling law for optical IRSs and unveil its dependence on the wavelength, transmitter (Tx)-to-IRS and IRS-to-receiver (Rx) distances, beam waist, and lens size. We compare optical IRSs in different power scaling regimes with optical relays in terms of the outage probability, diversity and coding gains, and optimal placement. Our results show that, at the expense of a higher hardware complexity, relay-assisted FSO links yield a better outage performance at high signal-to-noise-ratios (SNRs), but optical IRSs can achieve a higher performance at low SNRs. Moreover, while it is optimal to place relays equidistant from Tx and Rx, the optimal location of IRSs depends on the power scaling regime they operate in.

Optimization-based Phase-shift Codebook Design for Large IRSs

In this paper, we focus on large intelligent reflecting surfaces (IRSs) and propose a new codebook construction method to obtain a set of pre-designed phase-shift configurations for the IRS unit cells. Since the complexity of online optimization and the overhead for channel estimation for IRS-assisted communications scale with the size of the phase-shift codebook, the design of small codebooks is of high importance. We consider both continuous and discrete phase shift designs and formulate the codebook construction as optimization problems. To solve the optimization problems, we propose an optimal algorithm for the discrete phaseshift design and a low-complexity sub-optimal solution for the continuous design. Simulation results show that the proposed algorithms facilitate the construction of codebooks of different sizes and with different beamwidths. Moreover, the performance of the discrete phase-shift design with 2-bit quantization is shown to approach that of the continuous phase-shift design. Finally, our simulation results show that the proposed designs enable large transmit power savings compared to the existing linear and quadratic codebook designs.

Channel Estimation for Large Intelligent Surface-Based Transceiver Using a Parametric Channel Model

Large intelligent surface-based transceivers (LISBTs), in which a spatially continuous surface is being used for signal transmission and reception, have emerged as a promising solution for improving the coverage and data rate of wireless communication systems. To realize these objectives, the acquisition of accurate channel state information (CSI) in LISBT-assisted wireless communication systems is crucial. In this paper, we propose a channel estimation scheme based on a parametric physical channel model for line-of-sight dominated communication in millimeter and terahertz wave bands. The proposed estimation scheme requires only five pilot signals to perfectly estimate the channel parameters assuming there is no noise at the receiver. In the presence of noise, we propose an iterative estimation algorithm that decreases the channel estimation error due to noise. The training overhead and computational cost of the proposed scheme do not scale with the number of antennas. The simulation results demonstrate that the proposed estimation scheme significantly outperforms other benchmark schemes.

Modeling and Design of IRS-Assisted Multi-Link FSO Systems

In this paper, we investigate the modeling and design of intelligent reflecting surface (IRS)-assisted optical communication systems which are deployed to relax the line-of-sight (LOS) requirement in multi-link free space optical (FSO) systems. The FSO laser beams incident on the optical IRSs have a Gaussian power intensity profile and a nonlinear phase profile, whereas the plane waves in radio frequency (RF) systems have a uniform power intensity profile and a linear phase profile. Given these substantial differences, the results available for IRS-assisted RF systems are not applicable to IRS-assisted FSO systems. Therefore, we develop a new analytical channel model for point-to-point IRS-assisted FSO systems based on the Huygens-Fresnel principle. Our analytical model captures the impact of the size, position, and orientation of the IRS as well as its phase shift profile on the end-to-end channel. To allow the sharing of the optical IRS by multiple FSO links, we propose three different protocols, namely the time division (TD), IRS-division (IRSD), and IRS homogenization (IRSH) protocols. The proposed protocols address the specific characteristics of FSO systems including the non-uniformity and possible misalignment of the laser beams. Furthermore, to compare the proposed IRS sharing protocols, we analyze the bit error rate (BER) and the outage probability of IRS-assisted multi-link FSO systems in the presence of inter-link interference. Our simulation results validate the accuracy of the proposed analytical channel model for IRS-assisted FSO systems and confirm that this model is applicable for both large and intermediate IRS-receiver lens distances. Moreover, in the absence of misalignment errors, the IRSD protocol outperforms the other protocols, whereas in the presence of misalignment errors, the IRSH protocol performs significantly better than the IRSD protocol.

Intelligent Reflecting Surface-assisted Free-space Optical Communications

Free-space optical (FSO) systems are able to offer the high data-rate, secure, and cost-efficient communication links required for applications such as wireless front- and backhauling for 5G and 6G communication networks. Despite the substantial advancement of FSO systems over the past decades, the requirement of a line-of-sight connection between transmitter and receiver remains a key limiting factor for their deployment. In this paper, we discuss the potential role of intelligent reflecting surfaces (IRSs) as a solution to relax this requirement. We present an overview of existing optical IRS technologies; compare optical IRSs with radio-frequency IRSs and optical relays; and identify various open problems for future research on IRS-assisted FSO communications.

IRS-Assisted Active Device Detection

This paper studies intelligent reflecting surface (IRS) assisted active device detection. Since the locations of the devices are a priori unknown, optimal IRS beam alignment is not possible and a worst-case design for a given coverage area is developed. To this end, we propose a generalized likelihood ratio test (GLRT) detection scheme and an IRS phase-shift design that minimizes the worst-case probability of misdetection. In addition to the proposed optimization-based phase-shift design, we consider two alternative suboptimal designs based on closed-form expressions for the IRS phase shifts. Our performance analysis establishes the superiority of the optimization-based design, especially for large coverage areas. Furthermore, we investigate the impact of scatterers on the proposed line-of-sight based design using simulations.