Secure Communications for All Users in Low-Resolution IRS-aided Systems Under Imperfect and Unknown CSI

Provisioning secrecy for all users, given the heterogeneity and uncertainty of their channel conditions, locations, and the unknown location of the attacker/eavesdropper, is challenging and not always feasible. This work takes the first step to guarantee secrecy for all users where a low resolution intelligent reflecting surfaces (IRS) is used to enhance legitimate users' reception and thwart the potential eavesdropper (Eve) from intercepting. In real-life scenarios, due to hardware limitations of the IRS' passive reflective elements (PREs), the use of a full-resolution (continuous) phase shift (CPS) is impractical. In this paper, we thus consider a more practical case where the phase shift (PS) is modeled by a low-resolution (quantized) phase shift (QPS) while addressing the phase shift error (PSE) induced by the imperfect channel state information (CSI). To that end, we aim to maximize the minimum secrecy rate (SR) among all users by jointly optimizing the transmitter's beamforming vector and the IRS's passive reflective elements (PREs) under perfect/imperfect/unknown CSI. The resulting optimization problem is non-convex and even more complicated under imperfect/unknown CSI.

UAV-Assisted 5G Networks: Mobility-Aware 3D Trajectory Optimization and Resource Allocation for Dynamic Environments

This paper proposes a framework for robust design of UAV-assisted wireless networks that combine 3D trajectory optimization with user mobility prediction to address dynamic resource allocation challenges. We proposed a sparse second-order prediction model for real-time user tracking coupled with heuristic user clustering to balance service quality and computational complexity. The joint optimization problem is formulated to maximize the minimum rate. It is then decomposed into user association, 3D trajectory design, and resource allocation subproblems, which are solved iteratively via successive convex approximation (SCA). Extensive simulations demonstrate: (1) near-optimal performance with $\epsilon \approx 0.67\%$ deviation from upper-bound solutions, (2) $16\%$ higher minimum rates for distant users compared to non-predictive 3D designs, and (3) $10-30\%$ faster outage mitigation than time-division benchmarks. The framework's adaptive speed control enables precise mobile user tracking while maintaining energy efficiency under constrained flight time. Results demonstrate superior robustness in edge-coverage scenarios, making it particularly suitable for $5G/6G$ networks.

Enhancing Indoor and Outdoor THz Communications with Beyond Diagonal-IRS: Optimization and Performance Analysis

This work investigates the application of Beyond Diagonal Intelligent Reflective Surface (BD-IRS) to enhance THz downlink communication systems, operating in a hybrid: reflective and transmissive mode, to simultaneously provide services to indoor and outdoor users. We propose an optimization framework that jointly optimizes the beamforming vectors and phase shifts in the hybrid reflective/transmissive mode, aiming to maximize the system sum rate. To tackle the challenges in solving the joint design problem, we employ the conjugate gradient method and propose an iterative algorithm that successively optimizes the hybrid beamforming vectors and the phase shifts. Through comprehensive numerical simulations, our findings demonstrate a significant improvement in rate when compared to existing benchmark schemes, including time- and frequency-divided approaches, by approximately $30.5\%$ and $70.28\%$ respectively. This underscores the significant influence of IRS elements on system performance relative to that of base station antennas, highlighting their pivotal role in advancing the communication system efficacy.

User-centric Flexible Resource Management Framework for LEO Satellites with Fully Regenerative Payload

The regenerative capabilities of next-generation satellite systems offer a novel approach to design low earth orbit (LEO) satellite communication systems, enabling full flexibility in bandwidth and spot beam management, power control, and onboard data processing. These advancements allow the implementation of intelligent spatial multiplexing techniques, addressing the ever-increasing demand for future broadband data traffic. Existing satellite resource management solutions, however, do not fully exploit these capabilities. To address this issue, a novel framework called flexible resource management algorithm for LEO satellites (FLARE-LEO) is proposed to jointly design bandwidth, power, and spot beam coverage optimized for the geographic distribution of users. It incorporates multi-spot beam multicasting, spatial multiplexing, caching, and handover (HO). In particular, the spot beam coverage is optimized by using the unsupervised K-means algorithm applied to the realistic geographical user demands, followed by a proposed successive convex approximation (SCA)-based iterative algorithm for optimizing the radio resources. Furthermore, we propose two joint transmission architectures during the HO period, which jointly estimate the downlink channel state information (CSI) using deep learning and optimize the transmit power of the LEOs involved in the HO process to improve the overall system throughput. Simulations demonstrate superior performance in terms of delivery time reduction of the proposed algorithm over the existing solutions.

Joint Computation and Communication Resource Optimization for Beyond Diagonal UAV-IRS Empowered MEC Networks

Intelligent Reconfigurable Surfaces (IRS) are crucial for overcoming challenges in coverage, capacity, and energy efficiency beyond 5G (B5G). The classical IRS architecture, employing a diagonal phase shift matrix, hampers effective passive beamforming manipulation. To unlock its full potential, Beyond Diagonal IRS (BD-IRS or IRS 2.0) emerges as a revolutionary member, transcending limitations of the diagonal IRS. This paper introduces BD-IRS deployed on unmanned aerial vehicles (BD-IRS-UAV) in Mobile Edge Computing (MEC) networks. Here, users offload tasks to the MEC server due to limited resources and finite battery life. The objective is to minimize worst-case system latency by optimizing BD-IRS-UAV deployment, local and edge computational resource allocation, task segmentation, power allocation, and received beamforming vector. The resulting non-convex/non-linear NP-hard optimization problem is intricate, prompting division into two subproblems: 1) BD-IRS-UAV deployment, local and edge computational resources, and task segmentation, and 2) power allocation, received beamforming, and phase shift design. Standard optimization methods efficiently solve each subproblem. Monte Carlo simulations provide numerical results, comparing the proposed BD-IRS-UAV-enabled MEC optimization framework with various benchmarks. Performance evaluations include comparisons with fully-connected and group-connected architectures, single-connected diagonal IRS, and binary offloading, edge computation, fixed computation, and local computation frameworks. Results show a 7.25% lower latency and a 17.77% improvement in data rate with BD-IRS compared to conventional diagonal IRS systems, demonstrating the effectiveness of the proposed optimization framework.

Joint Source-Channel Coding System for 6G Communication: Design, Prototype and Future Directions

The goal of semantic communication is to surpass optimal Shannon's criterion regarding a notable problem for future communication which lies in the integration of collaborative efforts between the intelligence of the transmission source and the joint design of source coding and channel coding. The convergence of scholarly investigation and applicable products in the field of semantic communication is facilitated by the utilization of flexible structural hardware design, which is constrained by the computational capabilities of edge devices. This characteristic represents a significant benefit of joint source-channel coding (JSCC), as it enables the generation of source alphabets with diverse lengths and achieves a code rate of unity. Moreover, JSCC exhibits near-capacity performance while maintaining low complexity. Therefore, we leverage not only quasi-cyclic (QC) characteristics to propose a QC-LDPC code-based JSCC scheme but also Unequal Error Protection (UEP) to ensure the recovery of semantic importance. In this study, the feasibility for using a semantic encoder/decoder that is aware of UEP can be explored based on the existing JSCC system. This approach is aimed at protecting the significance of semantic task-oriented information. Additionally, the deployment of a JSCC system can be facilitated by employing Low-Density Parity-Check (LDPC) codes on a reconfigurable device. This is achieved by reconstructing the LDPC codes as QC-LDPC codes. The QC-LDPC layered decoding technique, which has been specifically optimized for hardware parallelism and tailored for channel decoding applications, can be suitably adapted to accommodate the JSCC system. The performance of the proposed system is evaluated by conducting BER measurements using both floating-point and 6-bit quantization.

Task-Oriented Communication Design at Scale

With countless promising applications in various domains such as IoT and industry 4.0, task-oriented communication design (TOCD) is getting accelerated attention from the research community. This paper presents a novel approach for designing scalable task-oriented quantization and communications in cooperative multi-agent systems (MAS). The proposed approach utilizes the TOCD framework and the value of information (VoI) concept to enable efficient communication of quantized observations among agents while maximizing the average return performance of the MAS, a parameter that quantifies the MAS's task effectiveness. The computational complexity of learning the VoI, however, grows exponentially with the number of agents. Thus, we propose a three-step framework: i) learning the VoI (using reinforcement learning (RL)) for a two-agent system, ii) designing the quantization policy for an $N$-agent MAS using the learned VoI for a range of bit-budgets and, (iii) learning the agents' control policies using RL while following the designed quantization policies in the earlier step. We observe that one can reduce the computational cost of obtaining the value of information by exploiting insights gained from studying a similar two-agent system - instead of the original $N$-agent system. We then quantize agents' observations such that their more valuable observations are communicated more precisely. Our analytical results show the applicability of the proposed framework under a wide range of problems. Numerical results show striking improvements in reducing the computational complexity of obtaining VoI needed for the TOCD in a MAS problem without compromising the average return performance of the MAS.

Joint Optimization of 3D Placement and Radio Resource Allocation for per-UAV Sum Rate Maximization

Unmanned aerial vehicles (UAV) have emerged as a practical solution that provides on-demand services to users in areas where the terrestrial network is non-existent or temporarily unavailable, e.g., due to natural disasters or network congestion. In general, UAVs' user-serving capacity is typically constrained by their limited battery life and the finite communication resources that highly impact their performance. This work considers the orthogonal frequency division multiple access (OFDMA) enabled multiple unmanned aerial vehicles (multi-UAV) communication systems to provide on-demand services. The main aim of this work is to derive an efficient technique for the allocation of radio resources, $3$D placement of UAVs, and user association matrices. To achieve the desired objectives, we decoupled the original joint optimization problem into two sub-problems: (i) $3$D placement and user association and (ii) sum-rate maximization for optimal radio resource allocation, which are solved iteratively. The proposed iterative algorithm is shown via numerical results to achieve fast convergence speed after fewer than 10 iterations. The benefits of the proposed design are demonstrated via superior sum-rate performance compared to existing reference designs. Moreover, results showed that the optimal power and sub-carrier allocation help to mitigate the inter-cell interference that directly impacts the system's performance.

Multi-Objective Optimization for 3D Placement and Resource Allocation in OFDMA-based Multi-UAV Networks

This work considers the orthogonal frequency division multiple access (OFDMA) technology that enables multiple unmanned aerial vehicles (multi-UAV) communication systems to provide on-demand services. The main aim of this work is to derive the optimal allocation of radio resources, 3D placement of UAVs, and user association matrices. To achieve the desired objectives, we decoupled the original joint optimization problem into two sub-problems: i) 3D placement and user association and ii) sum-rate maximization for optimal radio resource allocation, which are solved iteratively. The proposed iterative algorithm is shown via numerical results to achieve fast convergence speed after less than 10 iterations. The benefits of the proposed design are demonstrated via superior sum-rate performance compared to existing reference designs. Moreover, the results declared that the optimal power and sub-carrier allocation helped mitigate the co-cell interference that directly impacts the system's performance.

Network-Aided Intelligent Traffic Steering in 6G ORAN: A Multi-Layer Optimization Framework

To enable an intelligent, programmable and multi-vendor radio access network (RAN) for 6G networks, considerable efforts have been made in standardization and development of open RAN (ORAN). So far, however, the applicability of ORAN in controlling and optimizing RAN functions has not been widely investigated. In this paper, we jointly optimize the flow-split distribution, congestion control and scheduling (JFCS) to enable an intelligent traffic steering application in ORAN. Combining tools from network utility maximization and stochastic optimization, we introduce a multi-layer optimization framework that provides fast convergence, long-term utility-optimality and significant delay reduction compared to the state-of-the-art and baseline RAN approaches. Our main contributions are three-fold: i) we propose the novel JFCS framework to efficiently and adaptively direct traffic to appropriate radio units; ii) we develop low-complexity algorithms based on the reinforcement learning, inner approximation and bisection search methods to effectively solve the JFCS problem in different time scales; and iii) the rigorous theoretical performance results are analyzed to show that there exists a scaling factor to improve the tradeoff between delay and utility-optimization. Collectively, the insights in this work will open the door towards fully automated networks with enhanced control and flexibility. Numerical results are provided to demonstrate the effectiveness of the proposed algorithms in terms of the convergence rate, long-term utility-optimality and delay reduction.