Feature Allocation for Semantic Communication with Space-Time Importance Awareness

In the realm of semantic communication, the significance of encoded features can vary, while wireless channels are known to exhibit fluctuations across multiple subchannels in different domains. Consequently, critical features may traverse subchannels with poor states, resulting in performance degradation. To tackle this challenge, we introduce a framework called Feature Allocation for Semantic Transmission (FAST), which offers adaptability to channel fluctuations across both spatial and temporal domains. In particular, an importance evaluator is first developed to assess the importance of various features. In the temporal domain, channel prediction is utilized to estimate future channel state information (CSI). Subsequently, feature allocation is implemented by assigning suitable transmission time slots to different features. Furthermore, we extend FAST to the space-time domain, considering two common scenarios: precoding-free and precoding-based multiple-input multiple-output (MIMO) systems. An important attribute of FAST is its versatility, requiring no intricate fine-tuning. Simulation results demonstrate that this approach significantly enhances the performance of semantic communication systems in image transmission. It retains its superiority even when faced with substantial changes in system configuration.

Alleviating Distortion Accumulation in Multi-Hop Semantic Communication

Recently, semantic communication has been investigated to boost the performance of end-to-end image transmission systems. However, existing semantic approaches are generally based on deep learning and belong to lossy transmission. Consequently, as the receiver continues to transmit received images to another device, the distortion of images accumulates with each transmission. Unfortunately, most recent advances overlook this issue and only consider single-hop scenarios, where images are transmitted only once from a transmitter to a receiver. In this letter, we propose a novel framework of a multi-hop semantic communication system. To address the problem of distortion accumulation, we introduce a novel recursive training method for the encoder and decoder of semantic communication systems. Specifically, the received images are recursively input into the encoder and decoder to retrain the semantic communication system. This empowers the system to handle distorted received images and achieve higher performance. Our extensive simulation results demonstrate that the proposed methods significantly alleviate distortion accumulation in multi-hop semantic communication.

SCAN: Semantic Communication with Adaptive Channel Feedback

In existing semantic communication systems for image transmission, some images are generally reconstructed with considerably low quality. As a result, the reliable transmission of each image cannot be guaranteed, bringing significant uncertainty to semantic communication systems. To address this issue, we propose a novel performance metric to characterize the reliability of semantic communication systems termed semantic distortion outage probability (SDOP), which is defined as the probability of the instantaneous distortion larger than a given target threshold. Then, since the images with lower reconstruction quality are generally less robust and need to be allocated with more communication resources, we propose a novel framework of Semantic Communication with Adaptive chaNnel feedback (SCAN). It can reduce SDOP by adaptively adjusting the overhead of channel feedback for images with different reconstruction qualities, thereby enhancing transmission reliability. To realize SCAN, we first develop a deep learning-enabled semantic communication system for multiple-input multiple-output (MIMO) channels (DeepSC-MIMO) by leveraging the channel state information (CSI) and noise variance in the model design. We then develop a performance evaluator to predict the reconstruction quality of each image at the transmitter by distilling knowledge from DeepSC-MIMO. In this way, images with lower predicted reconstruction quality will be allocated with a longer CSI codeword to guarantee the reconstruction quality. We perform extensive experiments to demonstrate that the proposed scheme can significantly improve the reliability of image transmission while greatly reducing the feedback overhead.

One-shot Learning for Channel Estimation in Massive MIMO Systems

In conventional supervised deep learning based channel estimation algorithms, a large number of training samples are required for offline training. However, in practical communication systems, it is difficult to obtain channel samples for every signal-to-noise ratio (SNR). Furthermore, the generalization ability of these deep neural networks (DNN) is typically poor. In this work, we propose a one-shot self-supervised learning framework for channel estimation in multi-input multi-output (MIMO) systems. The required number of samples for offline training is small and our approach can be directly deployed to adapt to variable channels. Our framework consists of a traditional channel estimation module and a denoising module. The denoising module is designed based on the one-shot learning method Self2Self and employs Bernoulli sampling to generate training labels. Besides,we further utilize a blind spot strategy and dropout technique to avoid overfitting. Simulation results show that the performance of the proposed one-shot self-supervised learning method is very close to the supervised learning approach while obtaining improved generalization ability for different channel environments.

Deep-Unfolding for Next-Generation Transceivers

The stringent performance requirements of future wireless networks, such as ultra-high data rates, extremely high reliability and low latency, are spurring worldwide studies on defining the next-generation multiple-input multiple-output (MIMO) transceivers. For the design of advanced transceivers in wireless communications, optimization approaches often leading to iterative algorithms have achieved great success for MIMO transceivers. However, these algorithms generally require a large number of iterations to converge, which entails considerable computational complexity and often requires fine-tuning of various parameters. With the development of deep learning, approximating the iterative algorithms with deep neural networks (DNNs) can significantly reduce the computational time. However, DNNs typically lead to black-box solvers, which requires amounts of data and extensive training time. To further overcome these challenges, deep-unfolding has emerged which incorporates the benefits of both deep learning and iterative algorithms, by unfolding the iterative algorithm into a layer-wise structure analogous to DNNs. In this article, we first go through the framework of deep-unfolding for transceiver design with matrix parameters and its recent advancements. Then, some endeavors in applying deep-unfolding approaches in next-generation advanced transceiver design are presented. Moreover, some open issues for future research are highlighted.

FAST: Feature Arrangement for Semantic Transmission

Although existing semantic communication systems have achieved great success, they have not considered that the channel is time-varying wherein deep fading occurs occasionally. Moreover, the importance of each semantic feature differs from each other. Consequently, the important features may be affected by channel fading and corrupted, resulting in performance degradation. Therefore, higher performance can be achieved by avoiding the transmission of important features when the channel state is poor. In this paper, we propose a scheme of Feature Arrangement for Semantic Transmission (FAST). In particular, we aim to schedule the transmission order of features and transmit important features when the channel state is good. To this end, we first propose a novel metric termed feature priority, which takes into consideration both feature importance and feature robustness. Then, we perform channel prediction at the transmitter side to obtain the future channel state information (CSI). Furthermore, the feature arrangement module is developed based on the proposed feature priority and the predicted CSI by transmitting the prior features under better CSI. Simulation results show that the proposed scheme significantly improves the performance of image transmission compared to existing semantic communication systems without feature arrangement.

Adaptive CSI Feedback for Deep Learning-Enabled Image Transmission

Recently, deep learning-enabled joint-source channel coding (JSCC) has received increasing attention due to its great success in image transmission. However, most existing JSCC studies only focus on single-input single-output (SISO) channels. In this paper, we first propose a JSCC system for wireless image transmission over multiple-input multiple-output (MIMO) channels. As the complexity of an image determines its reconstruction difficulty, the JSCC achieves quite different reconstruction performances on different images. Moreover, we observe that the images with higher reconstruction qualities are generally more robust to the noise, and can be allocated with less communication resources than the images with lower reconstruction qualities. Based on this observation, we propose an adaptive channel state information (CSI) feedback scheme for precoding, which improves the effectiveness by adjusting the feedback overhead. In particular, we develop a performance evaluator to predict the reconstruction quality of each image, so that the proposed scheme can adaptively decrease the CSI feedback overhead for the transmitted images with high predicted reconstruction qualities in the JSCC system. We perform experiments to demonstrate that the proposed scheme can significantly improve the image transmission performance with much-reduced feedback overhead.

A Unified Multi-Task Semantic Communication System for Multimodal Data

Task-oriented semantic communication has achieved significant performance gains. However, the model has to be updated once the task is changed or multiple models need to be stored for serving different tasks. To address this issue, we develop a unified deep learning enabled semantic communication system (U-DeepSC), where a unified end-to-end framework can serve many different tasks with multiple modalities. As the difficulty varies from different tasks, different numbers of neural network layers are required for various tasks. We develop a multi-exit architecture in U-DeepSC to provide early-exit results for relatively simple tasks. To reduce the transmission overhead, we design a unified codebook for feature representation for serving multiple tasks, in which only the indices of these task-specific features in the codebook are transmitted. Moreover, we propose a dimension-wise dynamic scheme that can adjust the number of transmitted indices for different tasks as the number of required features varies from task to task. Furthermore, our dynamic scheme can adaptively adjust the numbers of transmitted features under different channel conditions to optimize the transmission efficiency. According to simulation results, the proposed U-DeepSC achieves comparable performance to the task-oriented semantic communication system designed for a specific task but with significant reduction in both transmission overhead and model size.

Multiband Delay Estimation for Localization Using a Two-Stage Global Estimation Scheme

The time of arrival (TOA)-based localization techniques, which need to estimate the delay of the line-of-sight (LoS) path, have been widely employed in location-aware networks. To achieve a high-accuracy delay estimation, a number of multiband-based algorithms have been proposed recently, which exploit the channel state information (CSI) measurements over multiple non-contiguous frequency bands. However, to the best of our knowledge, there still lacks an efficient scheme that fully exploits the multiband gains when the phase distortion factors caused by hardware imperfections are considered, due to that the associated multi-parameter estimation problem contains many local optimums and the existing algorithms can easily get stuck in a "bad" local optimum. To address these issues, we propose a novel two-stage global estimation (TSGE) scheme for multiband delay estimation. In the coarse stage, we exploit the group sparsity structure of the multiband channel and propose a Turbo Bayesian inference (Turbo-BI) algorithm to achieve a good initial delay estimation based on a coarse signal model, which is transformed from the original multiband signal model by absorbing the carrier frequency terms. The estimation problem derived from the coarse signal model contains less local optimums and thus a more stable estimation can be achieved than directly using the original signal model. Then in the refined stage, with the help of coarse estimation results to narrow down the search range, we perform a global delay estimation using a particle swarm optimization-least square (PSO-LS) algorithm based on a refined multiband signal model to exploit the multiband gains to further improve the estimation accuracy. Simulation results show that the proposed TSGE significantly outperforms the benchmarks with comparative computational complexity.

Robust Semantic Communications with Masked VQ-VAE Enabled Codebook

Although semantic communications have exhibited satisfactory performance for a large number of tasks, the impact of semantic noise and the robustness of the systems have not been well investigated. Semantic noise refers to the misleading between the intended semantic symbols and received ones, thus cause the failure of tasks. In this paper, we first propose a framework for the robust end-to-end semantic communication systems to combat the semantic noise. In particular, we analyze sample-dependent and sample-independent semantic noise. To combat the semantic noise, the adversarial training with weight perturbation is developed to incorporate the samples with semantic noise in the training dataset. Then, we propose to mask a portion of the input, where the semantic noise appears frequently, and design the masked vector quantized-variational autoencoder (VQ-VAE) with the noise-related masking strategy. We use a discrete codebook shared by the transmitter and the receiver for encoded feature representation. To further improve the system robustness, we develop a feature importance module (FIM) to suppress the noise-related and task-unrelated features. Thus, the transmitter simply needs to transmit the indices of these important task-related features in the codebook. Simulation results show that the proposed method can be applied in many downstream tasks and significantly improve the robustness against semantic noise with remarkable reduction on the transmission overhead.