Resource Allocation and 3D Trajectory Design for Power-Efficient IRS-Assisted UAV-NOMA Communications

In this paper, an intelligent reflecting surface (IRS) is introduced to assist an unmanned aerial vehicle (UAV) communication system based on non-orthogonal multiple access (NOMA) for serving multiple ground users. We aim to minimize the average total system energy consumption by jointly designing the resource allocation strategy, the three dimensional (3D) trajectory of the UAV, as well as the phase control at the IRS. The design is formulated as a non-convex optimization problem taking into account the maximum tolerable outage probability constraint and the individual minimum data rate requirement. To circumvent the intractability of the design problem due to the altitude-dependent Rician fading in UAV-to-user links, we adopt the deep neural network (DNN) approach to accurately approximate the corresponding effective channel gains, which facilitates the development of a low-complexity suboptimal iterative algorithm via dividing the formulated problem into two subproblems and address them alternatingly. Numerical results demonstrate that the proposed algorithm can converge to an effective solution within a small number of iterations and illustrate some interesting insights: (1) IRS enables a highly flexible UAV's 3D trajectory design via recycling the dissipated radio signal for improving the achievable system data rate and reducing the flight power consumption of the UAV; (2) IRS provides a rich array gain through passive beamforming in the reflection link, which can substantially reduce the required communication power for guaranteeing the required quality-of-service (QoS); (3) Optimizing the altitude of UAV's trajectory can effectively exploit the outage-guaranteed effective channel gain to save the total required communication power enabling power-efficient UAV communications.

Secure Communication in Multifunctional Active Intelligent Reflection Surface-assisted Systems

In this paper, the secure performance of multiuser multiple-input single-output wireless communications systems assisted by a multifunctional active intelligent reflection surface (IRS) is investigated. The active IRS can simultaneously reflect and amplify the incident signals and emit artificial noise to combat potential wiretapping. We minimize the total system power consumption by designing the phase, amplitude, and IRS mode selection of the active IRS elements, as well as the precoder and artificial noise vector of the base station (BS). The design is formulated as a non-convex optimization problem guaranteeing communication security. To tackle the problem, this paper proposes an iterative alternating algorithm to obtain an effective sub-optimal solution. The simulation results show that the proposed scheme offers superior secure performance over all the considered baseline schemes, especially when the number of eavesdropper antennas is more than that of the BS.

Beamforming Design for Intelligent Reflecting Surface-Enhanced Symbiotic Radio Systems

This paper investigates multiuser multi-input single-output downlink symbiotic radio communication systems assisted by an intelligent reflecting surface (IRS). Different from existing methods ideally assuming the secondary user (SU) can jointly decode information symbols from both the access point (AP) and the IRS via multiuser detection, we consider a more practical SU that only non-coherent detection is available. To characterize the non-coherent decoding performance, a practical upper bound of the average symbol error rate (SER) is derived. Subsequently, we jointly optimize the beamformer at the AP and the phase shifts at the IRS to maximize the average sum-rate of the primary system taking into account the maximum tolerable SER constraint for the SU. To circumvent the couplings of variables, we exploit the Schur complement that facilitates the design of a suboptimal beamforming algorithm based on successive convex approximation. Our simulation results show that compared with various benchmark algorithms, the proposed scheme significantly improves the average sum-rate of the primary system, while guaranteeing the decoding performance of the secondary system.

Deep Learning-Empowered Predictive Beamforming for IRS-Assisted Multi-User Communications

The realization of practical intelligent reflecting surface (IRS)-assisted multi-user communication (IRS-MUC) systems critically depends on the proper beamforming design exploiting accurate channel state information (CSI). However, channel estimation (CE) in IRS-MUC systems requires a significantly large training overhead due to the numerous reflection elements involved in IRS. In this paper, we adopt a deep learning approach to implicitly learn the historical channel features and directly predict the IRS phase shifts for the next time slot to maximize the average achievable sum-rate of an IRS-MUC system taking into account the user mobility. By doing this, only a low-dimension multiple-input single-output (MISO) CE is needed for transmit beamforming design, thus significantly reducing the CE overhead. To this end, a location-aware convolutional long short-term memory network (LA-CLNet) is first developed to facilitate predictive beamforming at IRS, where the convolutional and recurrent units are jointly adopted to exploit both the spatial and temporal features of channels simultaneously. Given the predictive IRS phase shift beamforming, an instantaneous CSI (ICSI)-aware fully-connected neural network (IA-FNN) is then proposed to optimize the transmit beamforming matrix at the access point. Simulation results demonstrate that the sum-rate performance achieved by the proposed method approaches that of the genie-aided scheme with the full perfect ICSI.

Robust and Secure Sum-Rate Maximization for Multiuser MISO Downlink Systems with Self-sustainable IRS

This paper investigates robust and secure multiuser multiple-input single-output (MISO) downlink communications assisted by a self-sustainable intelligent reflection surface (IRS), which can simultaneously reflect and harvest energy from the received signals. We study the joint design of beamformers at an access point (AP) and the phase shifts as well as the energy harvesting schedule at the IRS for maximizing the system sum-rate. The design is formulated as a non-convex optimization problem taking into account the wireless energy harvesting capability of IRS elements, secure communications, and the robustness against the impact of channel state information (CSI) imperfection. Subsequently, we propose a computationally-efficient iterative algorithm to obtain a suboptimal solution to the design problem. In each iteration, S-procedure and the successive convex approximation are adopted to handle the intermediate optimization problem. Our simulation results unveil that: 1) there is a non-trivial trade-off between the system sum-rate and the self-sustainability of the IRS; 2) the performance gain achieved by the proposed scheme is saturated with a large number of energy harvesting IRS elements; 3) an IRS equipped with small bit-resolution discrete phase shifters is sufficient to achieve a considerable system sum-rate of the ideal case with continuous phase shifts.