Abstract:Reconfigurable intelligent surface (RIS) technology is a promising enabler for next-generation (NextG) wireless systems, capable of dynamically shaping the propagation environment. Integrating RIS within the open radio access network (O-RAN) architecture enables flexible and intelligent control of wireless links. However, practical RIS-assisted operation requires efficient acquisition and reporting of channel state information (CSI) to support real-time control from the base station side. This paper proposes a CSI reference signal (CSI-RS)-based reporting scheme for downlink complex channel information (CCI) to facilitate RIS optimization in an O-RAN-compliant environment. The proposed framework establishing CCI extraction and CSI-RS reporting procedures is experimentally validated on a real-world testbed integrating an open-source O-RAN system with an RIS prototype operating in the n78 frequency band. Existing channel estimation-based RIS optimization algorithms, including Hadamard and orthogonal matching pursuit (OMP), are tailored for integration into the O-RAN architecture. Experimental results demonstrate notable improvements in received signal power for both near and far users, highlighting the effectiveness and practical viability of the proposed scheme.
Abstract:Open Radio Access Network (O-RAN) along with artificial intelligence, machine learning, cloud and edge networking, and virtualization are important enablers for designing flexible and software-driven programmable wireless networks. In addition, Reconfigurable Intelligent Surfaces (RIS) represent an innovative technology to direct incoming radio signals toward desired locations by software-controlled passive reflecting antenna elements. Despite their distinctive potential, there has been limited exploration of integrating RIS with the O-RAN framework, an area that holds promise for enhancing next-generation wireless systems. This paper addresses this gap by designing and developing the RIS optimization xApps within an O-RAN-based real-time 5G environment. We perform extensive measurement experiments using an end-to-end 5G testbed including the RIS prototype in a multi-user scenario. The results demonstrate that the RIS can be utilized either to boost the performance of the selected user or to provide the fairness among the users or to balance the tradeoff between the performance and fairness.