Overview of Cross-Component In-loop Filters in Video Coding Standards

In-loop filters have been comprehensively explored during the development of video coding standards due to their remarkable noise-reduction capability. In the early stage of video coding, in-loop filters, such as Deblocking Filter, Sample Adaptive Offset, and Adaptive Loop Filter, were performed separately for each component. Recently, cross-component filters were studied to improve the chroma fidelity by exploiting correlations between the luma and chroma channels. This paper summarizes the cross-component filters used in the state-of-the-art video coding standard. Specifically, it includes the Cross-Component Adaptive Loop Filter and Cross-Component Sample Adaptive Offset. Cross-component filters aim to reduce compression artifacts based on the correlation between different components and provide more accurate pixel reconstruction values. In this paper, we introduce the origin, development, and status of cross-component filters in the current video coding standards. Finally, we had some discussions on the further evolutions of cross-component filters.

Optimized Adaptive Loop Filter in Versatile Video Coding

In the Versatile Video Coding~(VVC) standard, adaptive loop filter~(ALF), including Geometry transformation-based Adaptive Loop Filter~(GALF) and Cross Component Adaptive Loop Filter~(CCALF), plays an essential role in reducing compression artifacts. However, it also has high coding complexity and requires many picture buffer accesses in the encoder that will increase external memory access and is unfriendly to the software and hardware design. Therefore, we propose an optimized ALF framework, including the parallel design of GALF and CCALF, the adaptive parameter decision of GALF, and one-pass CCALF scheme by effectively estimating the CCALF filtering distortion without conducting filter operation. Compared to VTM-8.0, the proposed method can reduce the picture buffer access from 152 to 1 and achieve roughly 25\% time-savings of the ALF module with negligible coding performance change under RA configuration. Some of the proposed methods have been adopted in the VVC reference software.

Spatio-Temporal Correlation Guided Geometric Partitioning for Versatile Video Coding

Geometric partitioning has attracted increasing attention by its remarkable motion field description capability in the hybrid video coding framework. However, the existing geometric partitioning (GEO) scheme in Versatile Video Coding (VVC) causes a non-negligible burden for signaling the side information. Consequently, the coding efficiency is limited. In view of this, we propose a spatio-temporal correlation guided geometric partitioning (STGEO) scheme to efficiently describe the object information in the motion field of video coding. The proposed method can economize the bits consumed for side information signaling, including the partitioning mode and motion information. We firstly analyze the characteristics of partitioning mode decision and motion vector selection in a statistically-sound way. Based on the observed spatio-temporal correlation, we design a mode prediction and coding method to reduce the overhead for representing the above mentioned side information. The main idea is to predict the STGEO modes and motion candidates that have higher selection possibilities, which can guide the entropy coding, i.e., representing the predicted high-probability modes and motion candidates with fewer bits. In particular, the high-probability STGEO modes are predicted based on the edge information and history modes of adjacent STGEO-coded blocks. The corresponding motion information is represented by the index in a merge candidate list, which is adaptively inferred based on the off-line trained merge candidate selection probability. Simulation results show that the proposed approach achieves 0.95% and 1.98% bit-rate savings on average compared to VTM-8.0 without GEO for Random Access and Low-Delay B configurations, respectively.

Edge-directed geometric partitioning for versatile video coding

To improve the coding performance, geometric partition (GEO) was proposed for the upcoming VVC standard. GEO provides 140 partition candidates. The index of optimal GEO mode needs to be signaled explicitly. Considering different structural characteristics of different CUs and the correlation between spatial adjacent blocks and temporal collocated blocks, we propose a GEO mode prediction strategy by constructing a Most Probable Mode (MPM) list to reduce the overhead of GEO index and improve coding efficiency. Based on the observation of the high correlation between the partition mode and object boundaries, an edge-directed geometric partition scheme is proposed to construct the MPM list according to spatio-temporal edge information. The proposed method provides an objective BD-rate gain of 0.58% and 1.00% on average for RA and LDB configurations compared to VTM-6.0. Besides, it also promotes the visual quality of object boundaries.

Deformable Wiener Filter for Future Video Coding

In-loop filters have attracted increasing attention due to the remarkable noise-reduction capability in the hybrid video coding framework. However, the existing in-loop filters in Versatile Video Coding (VVC) mainly take advantage of the image local similarity. Although some non-local based in-loop filters can make up for this shortcoming, the widely-used unsupervised parameter estimation method by non-local filters limits the performance. In view of this, we propose a deformable Wiener Filter (DWF). It combines the local and non-local characteristics and supervisedly trains the filter coefficients based on the Wiener Filter theory. In the filtering process, local adjacent samples and non-local similar samples are first derived for each sample of interest. Then the to-be-filtered samples are classified into specific groups based on the patch level noise and sample-level characteristics. Samples in each group share the same filter coefficients. After that, the local and non-local reference samples are adaptively fused based on the classification results. Finally, the filtering operation with outlier data constraints is conducted for each to-be-filtered sample. Moreover, the performance of the proposed DWF is analyzed with different reference sample derivation schemes in detail. Simulation results show that the proposed approach achieves 1.16%, 1.92%, and 2.67% bit-rate savings on average compared to the VTM-11.0 for All Intra, Random Access, and Low-Delay B configurations, respectively.