Alert button
Picture for Haley Cummings

Haley Cummings

Alert button

Bob

Mid-Air Helicopter Delivery at Mars Using a Jetpack

Mar 07, 2022
Jeff Delaune, Jacob Izraelevitz, Samuel Sirlin, David Sternberg, Louis Giersch, L. Phillipe Tosi, Evgeniy Skliyanskiy, Larry Young, Michael Mischna, Shannah Withrow-Maser, Juergen Mueller, Joshua Bowman, Mark S Wallace, Havard F. Grip, Larry Matthies, Wayne Johnson, Matthew Keennon, Benjamin Pipenberg, Harsh Patel, Christopher Lim, Aaron Schutte, Marcel Veismann, Haley Cummings, Sarah Conley, Jonathan Bapst, Theodore Tzanetos, Roland Brockers, Abhinandan Jain, David Bayard, Art Chmielewski, Olivier Toupet, Joel Burdick, Morteza Gharib, J., Balaram

Figure 1 for Mid-Air Helicopter Delivery at Mars Using a Jetpack
Figure 2 for Mid-Air Helicopter Delivery at Mars Using a Jetpack
Figure 3 for Mid-Air Helicopter Delivery at Mars Using a Jetpack
Figure 4 for Mid-Air Helicopter Delivery at Mars Using a Jetpack

Mid-Air Helicopter Delivery (MAHD) is a new Entry, Descent and Landing (EDL) architecture to enable in situ mobility for Mars science at lower cost than previous missions. It uses a jetpack to slow down a Mars Science Helicopter (MSH) after separation from the backshell, and reach aerodynamic conditions suitable for helicopter take-off in mid air. For given aeroshell dimensions, only MAHD's lander-free approach leaves enough room in the aeroshell to accommodate the largest rotor option for MSH. This drastically improves flight performance, notably allowing +150\% increased science payload mass. Compared to heritage EDL approaches, the simpler MAHD architecture is also likely to reduce cost, and enables access to more hazardous and higher-elevation terrains on Mars. This paper introduces a design for the MAHD system architecture and operations. We present a mechanical configuration that fits both MSH and the jetpack within the 2.65-m Mars heritage aeroshell, and a jetpack control architecture which fully leverages the available helicopter avionics. We discuss preliminary numerical models of the flow dynamics resulting from the interaction between the jets, the rotors and the side winds. We define a force-torque sensing architecture capable of handling the wind and trimming the rotors to prepare for safe take-off. Finally, we analyze the dynamic environment and closed-loop control simulation results to demonstrate the preliminary feasibility of MAHD.

* Accepted in 2022 IEEE Aerospace Conference 
Viaarxiv icon

Motivations and Preliminary Design for Mid-Air Deployment of a Science Rotorcraft on Mars

Oct 13, 2020
Jeff Delaune, Jacob Izraelevitz, Larry A. Young, William Rapin, Evgeniy Sklyanskiy, Wayne Johnson, Aaron Schutte, Abigail Fraeman, Valerie Scott, Carl Leake, Erik Ballesteros, Shannah Withrow, Raghav Bhagwat, Haley Cummings, Kim Aaron, Marcel Veismann, Skylar Wei, Regina Lee, Luis Pabon Madrid, Morteza Gharib, Joel Burdick

Figure 1 for Motivations and Preliminary Design for Mid-Air Deployment of a Science Rotorcraft on Mars
Figure 2 for Motivations and Preliminary Design for Mid-Air Deployment of a Science Rotorcraft on Mars
Figure 3 for Motivations and Preliminary Design for Mid-Air Deployment of a Science Rotorcraft on Mars
Figure 4 for Motivations and Preliminary Design for Mid-Air Deployment of a Science Rotorcraft on Mars

Mid-Air Deployment (MAD) of a rotorcraft during Entry, Descent and Landing (EDL) on Mars eliminates the need to carry a propulsion or airbag landing system. This reduces the total mass inside the aeroshell by more than 100 kg and simplifies the aeroshell architecture. MAD's lighter and simpler design is likely to bring the risk and cost associated with the mission down. Moreover, the lighter entry mass enables landing in the Martian highlands, at elevations inaccessible to current EDL technologies. This paper proposes a novel MAD concept for a Mars helicopter. We suggest a minimum science payload package to perform relevant science in the highlands. A variant of the Ingenuity helicopter is proposed to provide increased deceleration during MAD, and enough lift to fly the science payload in the highlands. We show in simulation that the lighter aeroshell results in a lower terminal velocity (30 m/s) at the end of the parachute phase of the EDL, and at higher altitudes than other approaches. After discussing the aerodynamics, controls, guidance, and mechanical challenges associated with deploying at such speed, we propose a backshell architecture that addresses them to release the helicopter in the safest conditions. Finally, we implemented the helicopter model and aerodynamic descent perturbations in the JPL Dynamics and Real-Time Simulation (DARTS)framework. Preliminary performance evaluation indicates landing and helicopter operation scan be achieved up to 5 km MOLA (Mars Orbiter Laser Altimeter reference).

Viaarxiv icon