Deep Reinforcement Learning-Enhanced Event-Triggered Data-Driven Predictive Control for a 3D Cable-Driven Soft Robotic Arm

Soft robots are challenging to control due to their nonlinear and time-varying dynamics. Data-enabled predictive control (DeePC) offers a model-free alternative by directly leveraging measured input-output trajectories to construct a predictive controller. However, its receding-horizon formulation requires solving a constrained optimization problem at every sampling instant, which can be computationally demanding for real-time deployment on resource-limited robotic platforms.To address this limitation, we propose an adaptive reinforcement-learning-based event-triggered DeePC (RL-ET-DeePC) framework for soft robotic control. A model-free RL policy is trained to determine when to invoke the DeePC optimizer based on the current system state representation, thereby reducing unnecessary optimization calls while preserving closed-loop performance.Simulation results show that RL-ET-DeePC reduces optimization frequency by up to 66% compared to periodic DeePC, while maintaining comparable tracking accuracy. Hardware experiments on a three-dimensional cable-driven soft robotic arm demonstrate zero-shot transfer, achieving a 34% reduction in optimization frequency with tracking accuracy comparable to periodic DeePC and more consistent performance than a static threshold-based event-triggered baseline.

A Novel Modular Cable-Driven Soft Robotic Arm with Multi-Segment Reconfigurability

This paper presents a novel, modular, cable-driven soft robotic arm featuring multi-segment reconfigurability. The proposed architecture enables a stackable system with independent segment control, allowing scalable adaptation to diverse structural and application requirements. The system is fabricated from soft silicone material and incorporates embedded tendon-routing channels with a protective dual-helical tendon structure. Experimental results showed that modular stacking substantially expanded the reachable workspace: relative to the single-segment arm, the three-segment configuration achieved up to a 13-fold increase in planar workspace area and a 38.9-fold increase in workspace volume. Furthermore, this study investigated the effect of silicone stiffness on actuator performance. The results revealed a clear trade-off between compliance and stiffness: softer silicone improved bending flexibility, while stiffer silicone improved structural rigidity and load-bearing stability. These results highlight the potential of stiffness tuning to balance compliance and strength for configuring scalable, reconfigurable soft robotic arms.