Vertical Sub-THz Channel Characterization: Sounder Implementation and Initial Measurements

We present a measurement-based characterization of indoor vertical ceiling-to-ground sub-THz channels in the 136-144 GHz band, motivated by ceiling-mounted radio-unit deployments for future distributed indoor networks. The measurements are performed using a vector network analyzer (VNA)-based channel sounder with a mechanically scanned planar virtual antenna array (VAA) at the receiver, enabling single-input single-output (SISO), small-array single-input multiple-output (SIMO), and large-array SIMO measurements in three indoor environments: an office, a laboratory, and a ventilation room. The small-array and large-array SIMO measurements synthesize 2 X 2 cm and 30 X 1 cm uniform rectangular arrays (URAs), respectively. The results show that the vertical links are generally dominated by a strong Line-of-Sight (LOS) component close to the ceiling-to-ground direction, but with clear environmental differences. The office and laboratory exhibit relatively limited delay dispersion, whereas the ventilation room shows stronger delayed multipath due to its corrugated metallic ceiling and surrounding metallic structures. The measured root mean square (RMS) delay spreads are 0.55-1.74 ns for the small-array measurements and 0.44-2.57 ns for the large-array measurements, smaller than those reported in several horizontal indoor sub-THz measurement campaigns at similar frequencies. However, the channel is not purely free-space. Repeatable second-order reflections involving the receiver table, ceiling, transmitter structure, and ceiling-mounted objects are observed in all environments. The large-array measurements further reveal spatial non-stationarity along the 30 cm aperture, with several multipath components visible only over limited parts of the array. These results show that ceiling materials, obstructions, and aperture-dependent variations matter in vertical sub-THz channel modeling.