Double-Active-IRS Aided Wireless Communication: Deployment Optimization and Capacity Scaling

In this letter, we consider a double-active-intelligent reflecting surface (IRS) aided wireless communication system, where two active IRSs are properly deployed to assist the communication from a base station (BS) to multiple users located in a given zone via the double-reflection links. Under the assumption of fixed per-element amplification power for each active-IRS element, we formulate a rate maximization problem subject to practical constraints on the reflection design, elements allocation, and placement of active IRSs. To solve this non-convex problem, we first obtain the optimal active-IRS reflections and BS beamforming, based on which we then jointly optimize the active-IRS elements allocation and placement by using the alternating optimization (AO) method. Moreover, we show that given the fixed per-element amplification power, the received signal-to-noise ratio (SNR) at the user increases asymptotically with the square of the number of reflecting elements; while given the fixed number of reflecting elements, the SNR does not increase with the per-element amplification power when it is asymptotically large. Last, numerical results are presented to validate the effectiveness of the proposed AO-based algorithm and compare the rate performance of the considered double-active-IRS aided wireless system with various benchmark systems.

Active-IRS-Aided Wireless Communication: Fundamentals, Designs and Open Issues

Intelligent reflecting surface (IRS) has emerged as a promising technology to realize smart radio environment for future wireless communication systems. Existing works in this line of research have mainly considered the conventional passive IRS that reflects wireless signals without power amplification, while in this article, we give an overview of a new type of IRS, called active IRS, which enables simultaneous signal reflection and amplification, thus significantly extending the signal coverage of passive IRS. We first present the fundamentals of active IRS, including its hardware architecture, signal and channel models, as well as practical constraints, in comparison with those of passive IRS. Then, we discuss new considerations and open issues in designing active-IRS-aided wireless communications, such as the reflection optimization, channel estimation, and deployment for active IRS, as well as its integrated design with passive IRS. Finally, numerical results are provided to show the potential performance gains of active IRS as compared to passive IRS and traditional active relay.

Active-Passive IRS aided Wireless Communication: New Hybrid Architecture and Elements Allocation Optimization

Intelligent reflecting surface (IRS) has emerged as a promising technology to enhance the wireless communication network coverage and capacity by dynamically controlling the radio signal propagation environment. In contrast to the existing works that considered active or passive IRS only, we propose in this paper a new hybrid active-passive IRS architecture that consists of both active and passive reflecting elements, thus achieving their combined advantages flexibly. Under a practical channel setup with Rician fading where only the statistical channel state information (CSI) is available, we study the hybrid IRS design in a multi-user communication system. Specifically, we formulate an optimization problem to maximize the achievable ergodic capacity of the worst-case user by designing the hybrid IRS beamforming and active/passive elements allocation based on the statistical CSI, subject to various practical constraints on the active-element amplification factor and amplification power consumption, as well as the total active and passive elements deployment budget. To solve this challenging problem, we first approximate the ergodic capacity in a simpler form and then propose an efficient algorithm to solve the problem optimally. Moreover, we show that for the special case with all channels to be line-of-sight (LoS), only active elements need to be deployed when the total deployment budget is sufficiently small, while both active and passive elements should be deployed with a decreasing number ratio when the budget increases and exceeds a certain threshold. Finally, numerical results are presented which demonstrate the performance gains of the proposed hybrid IRS architecture and its optimal design over the conventional schemes with active/passive IRS only under various practical system setups.

IRS-Aided Wireless Relaying: Optimal Deployment and Capacity Scaling

In this letter, we consider an intelligent reflecting surface (IRS)-aided wireless relaying system, where a decode-and-forward relay (R) is employed to forward data from a source (S) to a destination (D), aided by M passive reflecting elements. We consider two practical IRS deployment strategies, namely, single-IRS deployment where all reflecting elements are mounted on one single IRS that is deployed near S, R, or D, and multi-IRS deployment where the reflecting elements are allocated over three separate IRSs which are deployed near S, R, and D, respectively. Under the line-of-sight (LoS) channel model, we characterize the capacity scaling orders with respect to an increasing M for the IRS-aided relay system with different IRS deployment strategies. For single-IRS deployment, we show that deploying the IRS near R achieves the highest capacity as compared to that near S or D. While for multi-IRS deployment, we propose a practical cooperative IRS passive beamforming design which is analytically shown to achieve a larger capacity scaling order than the optimal single-IRS deployment (i.e., near R) when M is sufficiently large. Numerical examples are provided, which validate our theoretical results.

Enabling Smart Reflection in Integrated Air-Ground Wireless Network: IRS Meets UAV

Intelligent reflecting surface (IRS) and unmanned aerial vehicle (UAV) have emerged as two promising technologies to boost the performance of wireless communication networks, by proactively altering the wireless communication channels via smart signal reflection and maneuver control, respectively. However, they face different limitations in practice, which restrain their future applications. In this article, we propose new methods to jointly apply IRS and UAV in integrated air-ground wireless networks by exploiting their complementary advantages. Specifically, terrestrial IRS is used to enhance the UAV-ground communication performance, while UAV-mounted IRS is employed to assist in the terrestrial communication. We present their promising application scenarios, new communication design issues as well as potential solutions. In particular, we show that it is practically beneficial to deploy both the terrestrial and aerial IRSs in future wireless networks to reap the benefits of smart reflections in three-dimensional (3D) space.