Combined-distance-based score function of cognitive fuzzy sets and its application in lung cancer pain evaluation

In decision making, the cognitive fuzzy set (CFS) is a useful tool in expressing experts' complex assessments of alternatives. The distance of CFS, which plays an important role in decision analyses, is necessary when the CFS is applied in solving practical issues. However, as far as we know, the studies on the distance of CFS are few, and the current Minkowski distance of CFS ignores the hesitancy degree of CFS, which might cause errors. To fill the gap of the studies on the distance of CFS, because of the practicality of the Hausdorff distance, this paper proposes the improved cognitive fuzzy Minkowski (CF-IM) distance and the cognitive fuzzy Hausdorff (CF-H) distance to enrich the studies on the distance of CFS. It is found that the anti-perturbation ability of the CF-H distance is stronger than that of the CF-IM distance, but the information utilization of the CF-IM distance is higher than that of the CF-H distance. To balance the anti-perturbation ability and information utilization of the CF-IM distance and CF-H distance, the cognitive fuzzy combined (CF-C) distance is proposed by establishing the linear combination of the CF-IM distance and CF-H distance. Based on the CF-C distance, a combined-distanced-based score function of CFS is proposed to compare CFSs. The proposed score function is employed in lung cancer pain evaluation issues. The sensitivity and comparison analyses demonstrate the reliability and advantages of the proposed methods.

A Simple Self-calibration Method for The Internal Time Synchronization of MEMS LiDAR

This paper proposes a simple self-calibration method for the internal time synchronization of MEMS(Micro-electromechanical systems) LiDAR during research and development. Firstly, we introduced the problem of internal time misalignment in MEMS lidar. Then, a robust Minimum Vertical Gradient(MVG) prior is proposed to calibrate the time difference between the laser and MEMS mirror, which can be calculated automatically without any artificial participation or specially designed cooperation target. Finally, actual experiments on MEMS LiDARs are implemented to demonstrate the effectiveness of the proposed method. It should be noted that the calibration can be implemented in a simple laboratory environment without any ranging equipment and artificial participation, which greatly accelerate the progress of research and development in practical applications.

Self-supervised Low Light Image Enhancement and Denoising

This paper proposes a self-supervised low light image enhancement method based on deep learning, which can improve the image contrast and reduce noise at the same time to avoid the blur caused by pre-/post-denoising. The method contains two deep sub-networks, an Image Contrast Enhancement Network (ICE-Net) and a Re-Enhancement and Denoising Network (RED-Net). The ICE-Net takes the low light image as input and produces a contrast enhanced image. The RED-Net takes the result of ICE-Net and the low light image as input, and can re-enhance the low light image and denoise at the same time. Both of the networks can be trained with low light images only, which is achieved by a Maximum Entropy based Retinex (ME-Retinex) model and an assumption that noises are independently distributed. In the ME-Retinex model, a new constraint on the reflectance image is introduced that the maximum channel of the reflectance image conforms to the maximum channel of the low light image and its entropy should be the largest, which converts the decomposition of reflectance and illumination in Retinex model to a non-ill-conditioned problem and allows the ICE-Net to be trained with a self-supervised way. The loss functions of RED-Net are carefully formulated to separate the noises and details during training, and they are based on the idea that, if noises are independently distributed, after the processing of smoothing filters (\eg mean filter), the gradient of the noise part should be smaller than the gradient of the detail part. It can be proved qualitatively and quantitatively through experiments that the proposed method is efficient.