Blockage Prediction in Directional mmWave Links Using Liquid Time Constant Network

We propose to use a liquid time constant (LTC) network to predict the future blockage status of a millimeter wave (mmWave) link using only the received signal power as the input to the system. The LTC network is based on an ordinary differential equation (ODE) system inspired by biology and specialized for near-future prediction for time sequence observation as the input. Using an experimental dataset at 60 GHz, we show that our proposed use of LTC can reliably predict the occurrence of blockage and the length of the blockage without the need for scenario-specific data. The results show that the proposed LTC can predict with upwards of 97.85\% accuracy without prior knowledge of the outdoor scenario or retraining/tuning. These results highlight the promising gains of using LTC networks to predict time series-dependent signals, which can lead to more reliable and low-latency communication.

Robust and Efficient Fault Diagnosis of mm-Wave Active Phased Arrays using Baseband Signal

One key communication block in 5G and 6G radios is the active phased array (APA). To ensure reliable operation, efficient and timely fault diagnosis of APAs on-site is crucial. To date, fault diagnosis has relied on measurement of frequency domain radiation patterns using costly equipment and multiple strictly controlled measurement probes, which are time-consuming, complex, and therefore infeasible for on-site deployment. This paper proposes a novel method exploiting a Deep Neural Network (DNN) tailored to extract the features hidden in the baseband in-phase and quadrature signals for classifying the different faults. It requires only a single probe in one measurement point for fast and accurate diagnosis of the faulty elements and components in APAs. Validation of the proposed method is done using a commercial 28 GHz APA. Accuracies of 99% and 80% have been demonstrated for single- and multi-element failure detection, respectively. Three different test scenarios are investigated: on-off antenna elements, phase variations, and magnitude attenuation variations. In a low signal to noise ratio of 4 dB, stable fault detection accuracy above 90% is maintained. This is all achieved with a detection time of milliseconds (e.g 6~ms), showing a high potential for on-site deployment.