Track-before-detect in RIS-aided Integrated Sensing and Communication

This study considers a base station equipped with sensing and communication capabilities, which serves a ground user and scans a portion of the sky via a passive reconfigurable intelligent surface. To achieve more favorable system tradeoffs, we utilize a multi-frame radar detector, comprising a detector, a plot-extractor, and a track-before-detect processor. The main idea proposed here is that user spectral efficiency can be enhanced by increasing the number of scans jointly processed by the multi-frame radar detector while maintaining the same sensing performance. A numerical analysis is conducted to verify the effectiveness of the proposed solution and to evaluate the achievable system tradeoffs.

STAR-RIS Transceivers: Integrated Sensing and Communication with Pulsed Signals

This study examines an integrated sensing and communication (ISAC) transceiver featuring a simultaneous transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) and a receiver equipped with a passive electronically scanned array (PESA) and a single digital channel. By utilizing a periodic pulsed signal emitted by a feeder, we introduce at the STAR-RIS a space modulation to illuminate two angular directions observed by the radar receiver, one in each half-space, and a time modulation to distinguish the corresponding echoes from prospective moving targets and embed communication messages. The proposed time modulation employs orthogonal binary codebooks with different trade-offs in transmission and error rates, while having minimal impact on the radar performance, evaluated by probability of detection and root mean square error in the radial velocity estimation.

Parameter estimation of range-migrating targets using OTFS signals from LEO satellites

This study investigates a communication-centric integrated sensing and communication (ISAC) system that utilizes orthogonal time frequency space (OTFS) modulated signals emitted by low Earth orbit (LEO) satellites to estimate the parameters of space targets experiencing range migration, henceforth referred to as high-speed targets. Leveraging the specific signal processing performed by OTFS transceivers, we derive a novel input-output model for the echo generated by a high-speed target in scenarios where ideal and rectangular shaping filters are employed. Our findings reveal that the target response exhibits a sparse structure in the delay-Doppler domain, dependent solely upon the initial range and range-rate; notably, range migration causes a spread in the target response, marking a significant departure from previous studies. Utilizing this signal structure, we propose an approximate implementation of the maximum likelihood estimator for the target's initial range, range-rate, and amplitude. The estimation process involves obtaining coarse information on the target response using a block orthogonal matching pursuit algorithm, followed by a refinement step using a bank of matched filters focused on a smaller range and range-rate region. Finally, numerical examples are provided to evaluate the estimation performance.

Integrated Communication and RIS-aided Track-Before-Detect Radar Sensing

This paper investigates an integrated sensing and communication system where the base station serves multiple downlink users, while employing a passive reconfigurable intelligent surface to detect small, noncooperative airborne targets. We propose a method to design the two-way beampattern of the RIS-assisted monostatic radar, which allows controlling the sidelobe levels in the presence of eavesdroppers, jammers, and other scattering objects and avoiding any radar interference to the users. To obtain more favorable system tradeoffs, we exploit the correlation of the target echoes over consecutive scans by resorting to a multi-frame radar detector, which includes a detector, a plot-extractor, and a track-before-detect processor. A numerical analysis is provided to verify the effectiveness of the proposed solutions and to assess the achievable tradeoffs. Our results show that, by increasing the number of scans processed by the radar detector (and therefore its implementation complexity), we can reduce the amount of power dedicated to the radar function while maintaining the same sensing performance (measured in terms of probability of target detection and root mean square error in the estimation of target position); this excess power can be reused to increase the user sum-rate.

STAR-RIS-based Pulse-Doppler Radars

In this study, we consider a pulse-Doppler radar relying on a simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) for scanning a given volume; the radar receiver is collocated with the STAR-RIS and aims to detect moving targets and estimate their radial velocity in the presence of clutter. To separate the echoes received from the transmissive and reflective half-spaces, the STAR-RIS superimposes a different slow-time modulation on the pulses redirected in each half-space, while the radar detector employs a decision rule based on a generalized information criterion (GIC). Two scanning policies are introduced, namely, simultaneous and sequential scanning, with different tradeoffs in terms of radial velocity estimation accuracy and complexity of the radar detector.

Semi-Blind Multi-Tag Ambient Backscatter Communications Using Radar Signals

In this work, we consider a backscatter communication system wherein multiple asynchronous sources (tags) exploit the reverberation generated by a nearby radar transmitter as an ambient carrier to deliver a message to a common destination (reader) through a number of available subchannels. We propose a new encoding strategy wherein each tag transmits both pilot and data symbols on each subchannel and repeats some of the data symbols on multiple subchannels. We then exploit this signal structure to derive two semi-blind iterative algorithms for joint estimation of the data symbols and the subchannel responses that are also able to handle some missing measurements. The proposed encoding/decoding strategies are scalable with the number of tags and their payload and can achieve different tradeoffs in terms of transmission and error rates. Some numerical examples are provided to illustrate the merits of the proposed solutions.

Subspace-Based Detection in OFDM ISAC Systems under Different Constellations

This paper investigates subspace-based target detection in OFDM integrated sensing and communications (ISAC) systems, considering the impact of various constellations. To meet diverse communication demands, different constellation schemes with varying modulation orders (e.g., PSK, QAM) can be employed, which in turn leads to variations in peak sidelobe levels (PSLs) within the radar functionality. These PSL fluctuations pose a significant challenge in the context of multi-target detection, particularly in scenarios where strong sidelobe masking effects manifest. To tackle this challenge, we have devised a subspace-based approach for a step-by-step target detection process, systematically eliminating interference stemming from detected targets. Simulation results corroborate the effectiveness of the proposed method in achieving consistently high target detection performance under a wide range of constellation options in OFDM ISAC systems.

Beampattern Design for Transmit Architectures Based on Reconfigurable Intelligent Surfaces

In this work, we consider a transmit architecture where few active antennas (sources), each equipped with a dedicated radio frequency chain, illuminate a reconfigurable intelligent surface (RIS) that control the beam-steering capability of the whole system. In this framework, we tackle the beampattern design problem, where the waveform emitted by the sources and the phase shifts introduced by the RIS are designed so that the realized beampattern matches, in a least-square sense, the desired one. The design of this architecture can be useful in many areas, such as radar detection and tracking, millimeter wave, sub-THz, and THz communications, and integrated sensing and communications. We provide a sub-optimum solution to the beampattern design problem, and we report an example to show that this RIS-based transmit architecture can be competitive with respect to fully-digital MIMO systems, especially if constant-modulus waveforms are required.

Beampattern design for radars with reconfigurable intelligent surfaces

We consider a radar architecture where an illuminator composed of few sources is used as a feeder for a (passive) reconfigurable intelligent surface (RIS), so as to mimic the behavior of a multiple-input multiple-output (MIMO) radar composed of as many active elements as the RIS. In this framework, we study the problem of beampattern design in the space-frequency domain, and we propose to choose the source signals and the RIS adjustable phases in order to minimize the weighted squared error between the desired (amplitude) beampattern and the synthesized one. A low complexity iterative algorithm is proposed to solve the resulting non-convex least square problem. An example is provided to show the merits of the proposed approach.

On the Coexistence of eMBB and URLLC in Multi-cell Massive MIMO

The non-orthogonal coexistence between the enhanced mobile broadband (eMBB) and the ultra-reliable low-latency communication (URLLC) in the downlink of a multi-cell massive MIMO system is rigorously analyzed in this work. We provide a unified information-theoretic framework blending an infinite-blocklength analysis of the eMBB spectral efficiency (SE) in the ergodic regime with a finite-blocklength analysis of the URLLC error probability relying on the use of mismatched decoding, and of the so-called saddlepoint approximation. Puncturing (PUNC) and superposition coding (SPC) are considered as alternative downlink coexistence strategies to deal with the inter-service interference, under the assumption of only statistical channel state information (CSI) knowledge at the users. eMBB and URLLC performances are then evaluated over different precoding techniques and power control schemes, by accounting for imperfect CSI knowledge at the base stations, pilot-based estimation overhead, pilot contamination, spatially correlated channels, the structure of the radio frame, and the characteristics of the URLLC activation pattern. Simulation results reveal that SPC is, in many operating regimes, superior to PUNC in providing higher SE for the eMBB yet achieving the target reliability for the URLLC with high probability. Moreover, PUNC might cause eMBB service outage in presence of high URLLC traffic loads. However, PUNC turns to be necessary to preserve the URLLC performance in scenarios where the multi-user interference cannot be satisfactorily alleviated.