A Framework for Individual Tree Growth Reconstruction Using Multi-Platform Laser Scanning

Accurate tree-level forest monitoring using laser scanning data requires reliable tree delineation, consistent tree correspondence across multitemporal point clouds, and accurate estimation of tree attributes and their change. Reconstructing tree growth in boreal forests is challenging due to the scarcity of historical stem-level data, propagation of errors from older sensors into change estimation, and growth rates with a magnitude of measurement uncertainty. This study investigates a framework for estimating individual tree diameter at breast height (DBH) and stem volume growth using 136 point clouds acquired between 2014--2025 with 11 scanners on airborne (ALS), mobile (MLS), and terrestrial laser scanning (TLS) platforms across boreal forest test sites. Trees were delineated from an MLS point cloud using deep learning-based segmentation which was transferred to the remaining point clouds, resulting in reliable multitemporal tree correspondence. Stem curves were derived from MLS/TLS data, with ALS data used for height estimation, enabling DBH and volume estimation and time series. A height growth-based scaling model was used to reconstruct stem attributes across time and estimate growth. Results showed that modeled growth achieved higher agreement with manual growth estimates than differencing independently estimated attributes from point clouds. The modeled-manual 5- and 10-year growth RMSEs were 55--111\% and 26--67\% for DBH, and 31--87\% and 21--67\% for volume, respectively, depending on plot difficulty. The scaling model was temporally robust, with errors remaining stable or stabilizing after 5--6 years, reaching maximum RMSEs of 8--12\% for DBH and 12--23\% for volume after 12 years. Combining MLS/TLS-derived stem measurements with multitemporal ALS-derived heights provided a robust framework for individual tree growth estimation without requiring multiple under-canopy scans.

Towards autonomous photogrammetric forest inventory using a lightweight under-canopy robotic drone

Drones are increasingly used in forestry to capture high-resolution remote sensing data. While operations above the forest canopy are already highly automated, flying inside forests remains challenging, primarily relying on manual piloting. Inside dense forests, reliance on the Global Navigation Satellite System (GNSS) for localization is not feasible. Additionally, the drone must autonomously adjust its flight path to avoid collisions. Recently, advancements in robotics have enabled autonomous drone flights in GNSS-denied obstacle-rich areas. In this article, a step towards autonomous forest data collection is taken by building a prototype of a robotic under-canopy drone utilizing state-of-the-art open-source methods and validating its performance for data collection inside forests. The autonomous flight capability was evaluated through multiple test flights in two boreal forest test sites. The tree parameter estimation capability was studied by conducting diameter at breast height (DBH) estimation using onboard stereo camera data and photogrammetric methods. The prototype conducted flights in selected challenging forest environments, and the experiments showed excellent performance in forest reconstruction with a miniaturized stereoscopic photogrammetric system. The stem detection algorithm managed to identify 79.31 % of the stems. The DBH estimation had a root mean square error (RMSE) of 3.33 cm (12.79 %) and a bias of 1.01 cm (3.87 %) across all trees. For trees with a DBH less than 30 cm, the RMSE was 1.16 cm (5.74 %), and the bias was 0.13 cm (0.64 %). When considering the overall performance in terms of DBH accuracy, autonomy, and forest complexity, the proposed approach was superior compared to methods proposed in the scientific literature. Results provided valuable insights into autonomous forest reconstruction using drones, and several further development topics were proposed.