A Kinematic Analysis of Palm Degrees of Freedom for Enhancing Thumb Opposability in Robotic Hands

This study investigates the kinematic role of palm degrees of freedom (DoF) in enhancing thumb opposability in a five-finger robotic hand. A hand model consisting of a five DoF thumb and four fingers with three to four DoF is analyzed, where palm motion is introduced between adjacent fingers. To quantitatively evaluate thumb-finger interaction, the overlap workspace volume is defined based on voxelized fingertip reachable regions. Seven cases are considered, including configurations with increased total DoF and configurations in which the total DoF is maintained by redistributing DoF from the fingers to the palm. The results show that palm DoF significantly improves opposability, particularly for the ring and little fingers, by repositioning their base locations rather than simply extending their reachable range. However, when the total DoF is constrained, redistributing DoF to the palm leads to trade-offs between overlap workspace expansion and kinematic redundancy. These findings indicate that palm DoF and finger DoF play distinct roles in hand kinematics and should be considered jointly in design. This study provides a quantitative framework for evaluating palm-induced opposability without relying on object or contact models and offers practical design guidelines for incorporating palm motion in robotic hands.

A Kinematic Framework for Evaluating Pinch Configurations in Robotic Hand Design without Object or Contact Models

Evaluating the pinch capability of a robotic hand is important for understanding its functional dexterity. However, many existing grasp evaluation methods rely on object geometry or contact force models, which limits their applicability during the early stages of robotic hand design. This study proposes a kinematic evaluation method for analyzing pinch configurations of robotic hands based on interactions between fingertip workspaces. First, the reachable workspace of each fingertip is computed from the joint configurations of the fingers. Then, feasible pinch configurations are detected by evaluating the relationships between fingertip pairs. Since the proposed method does not require information about object geometry or contact force models, the pinch capability of a robotic hand can be evaluated solely based on its kinematic structure. In addition, analyses are performed on four different kinematic structures of the hand to investigate their impact on the pinch configurations. The proposed evaluation framework can serve as a useful tool for comparing different robotic hand designs and analyzing pinch capability during the design stage.