A Kinematic Analysis of Palm Degrees of Freedom for Enhancing Thumb Opposability in Robotic Hands

This study investigates the kinematic role of palm degrees of freedom (DoF) in enhancing thumb opposability in a five-finger robotic hand. A hand model consisting of a five DoF thumb and four fingers with three to four DoF is analyzed, where palm motion is introduced between adjacent fingers. To quantitatively evaluate thumb-finger interaction, the overlap workspace volume is defined based on voxelized fingertip reachable regions. Seven cases are considered, including configurations with increased total DoF and configurations in which the total DoF is maintained by redistributing DoF from the fingers to the palm. The results show that palm DoF significantly improves opposability, particularly for the ring and little fingers, by repositioning their base locations rather than simply extending their reachable range. However, when the total DoF is constrained, redistributing DoF to the palm leads to trade-offs between overlap workspace expansion and kinematic redundancy. These findings indicate that palm DoF and finger DoF play distinct roles in hand kinematics and should be considered jointly in design. This study provides a quantitative framework for evaluating palm-induced opposability without relying on object or contact models and offers practical design guidelines for incorporating palm motion in robotic hands.

A Kinematic Framework for Evaluating Pinch Configurations in Robotic Hand Design without Object or Contact Models

Evaluating the pinch capability of a robotic hand is important for understanding its functional dexterity. However, many existing grasp evaluation methods rely on object geometry or contact force models, which limits their applicability during the early stages of robotic hand design. This study proposes a kinematic evaluation method for analyzing pinch configurations of robotic hands based on interactions between fingertip workspaces. First, the reachable workspace of each fingertip is computed from the joint configurations of the fingers. Then, feasible pinch configurations are detected by evaluating the relationships between fingertip pairs. Since the proposed method does not require information about object geometry or contact force models, the pinch capability of a robotic hand can be evaluated solely based on its kinematic structure. In addition, analyses are performed on four different kinematic structures of the hand to investigate their impact on the pinch configurations. The proposed evaluation framework can serve as a useful tool for comparing different robotic hand designs and analyzing pinch capability during the design stage.

Kinematic Optimization of Phalanx Length Ratios in Robotic Hands Using Potential Dexterity

In the design stage of robotic hands, it is not straightforward to quantitatively evaluate the effect of phalanx length ratios on dexterity without defining specific objects or manipulation tasks. Therefore, this study presents a framework for optimizing the phalanx length ratios of a five-finger robotic hand based on potential dexterity within a kinematic structure. The proposed method employs global manipulability, workspace volume, overlap workspace volume, and fingertip sensitivity as evaluation metrics, and identifies optimal design configurations using a weighted objective function under given constraints. The reachable workspace is discretized using a voxel-based representation, and joint motions are discretized at uniform intervals for evaluation. The optimization is performed over design sets for both the thumb and the other fingers, and design combinations that do not generate overlap workspace are excluded. The results show that each phalanx does not contribute equally to the overall dexterity, and the factors influencing each phalanx are identified. In addition, it is observed that the selection of weighting coefficients does not necessarily lead to the direct maximization of individual performance metrics, due to the non-uniform distribution of evaluation measures within the design space. The proposed framework provides a systematic approach to analyze the trade-offs among reachability, dexterity, and controllability, and can serve as a practical guideline for the kinematic design of multi-fingered robotic hands.

Crane Lowering Guidance Using a Attachable Camera Module for Driver Vision Support

Cranes have long been essential equipment for lifting and placing heavy loads in construction projects. This study focuses on the lowering phase of crane operation, the stage in which the load is moved to the desired location. During this phase, a constant challenge exists: the load obstructs the operator's view of the landing point. As a result, operators traditionally have to rely on verbal or gestural instructions from ground personnel, which significantly impacts site safety. To alleviate this constraint, the proposed system incorporates a attachable camera module designed to be attached directly to the load via a suction cup. This module houses a single-board computer, battery, and compact camera. After installation, it streams and processes images of the ground directly below the load in real time to generate installation guidance. Simultaneously, this guidance is transmitted to and monitored by a host computer. Preliminary experiments were conducted by attaching this module to a test object, confirming the feasibility of real-time image acquisition and transmission. This approach has the potential to significantly improve safety on construction sites by providing crane operators with an instant visual reference of hidden landing zones.