Adaptive Energy Management for Self-Sustainable Wearables in Mobile Health

Wearable devices that integrate multiple sensors, processors, and communication technologies have the potential to transform mobile health for remote monitoring of health parameters. However, the small form factor of the wearable devices limits the battery size and operating lifetime. As a result, the devices require frequent recharging, which has limited their widespread adoption. Energy harvesting has emerged as an effective method towards sustainable operation of wearable devices. Unfortunately, energy harvesting alone is not sufficient to fulfill the energy requirements of wearable devices. This paper studies the novel problem of adaptive energy management towards the goal of self-sustainable wearables by using harvested energy to supplement the battery energy and to reduce manual recharging by users. To solve this problem, we propose a principled algorithm referred as AdaEM. There are two key ideas behind AdaEM. First, it uses machine learning (ML) methods to learn predictive models of user activity and energy usage patterns. These models allow us to estimate the potential of energy harvesting in a day as a function of the user activities. Second, it reasons about the uncertainty in predictions and estimations from the ML models to optimize the energy management decisions using a dynamic robust optimization (DyRO) formulation. We propose a light-weight solution for DyRO to meet the practical needs of deployment. We validate the AdaEM approach on a wearable device prototype consisting of solar and motion energy harvesting using real-world data of user activities. Experiments show that AdaEM achieves solutions that are within 5% of the optimal with less than 0.005% execution time and energy overhead.

ECO: Enabling Energy-Neutral IoT Devices through Runtime Allocation of Harvested Energy

Energy harvesting offers an attractive and promising mechanism to power low-energy devices. However, it alone is insufficient to enable an energy-neutral operation, which can eliminate tedious battery charging and replacement requirements. Achieving an energy-neutral operation is challenging since the uncertainties in harvested energy undermine the quality of service requirements. To address this challenge, we present a rollout-based runtime energy-allocation framework that optimizes the utility of the target device under energy constraints. The proposed framework uses an efficient iterative algorithm to compute initial energy allocations at the beginning of a day. The initial allocations are then corrected at every interval to compensate for the deviations from the expected energy harvesting pattern. We evaluate this framework using solar and motion energy harvesting modalities and American Time Use Survey data from 4772 different users. Compared to state-of-the-art techniques, the proposed framework achieves 34.6% higher utility even under energy-limited scenarios. Moreover, measurements on a wearable device prototype show that the proposed framework has less than 0.1% energy overhead compared to iterative approaches with a negligible loss in utility.

MGait: Model-Based Gait Analysis Using Wearable Bend and Inertial Sensors

Movement disorders, such as Parkinson's disease, affect more than 10 million people worldwide. Gait analysis is a critical step in the diagnosis and rehabilitation of these disorders. Specifically, step length provides valuable insights into the gait quality and rehabilitation process. However, traditional approaches for estimating step length are not suitable for continuous daily monitoring since they rely on special mats and clinical environments. To address this limitation, we present a novel and practical step-length estimation technique using low-power wearable bend and inertial sensors. Experimental results show that the proposed model estimates step length with 5.49% mean absolute percentage error and provides accurate real-time feedback to the user.

Transfer Learning for Human Activity Recognition using Representational Analysis of Neural Networks

Human activity recognition (HAR) research has increased in recent years due to its applications in mobile health monitoring, activity recognition, and patient rehabilitation. The typical approach is training a HAR classifier offline with known users and then using the same classifier for new users. However, the accuracy for new users can be low with this approach if their activity patterns are different than those in the training data. At the same time, training from scratch for new users is not feasible for mobile applications due to the high computational cost and training time. To address this issue, we propose a HAR transfer learning framework with two components. First, a representational analysis reveals common features that can transfer across users and user-specific features that need to be customized. Using this insight, we transfer the reusable portion of the offline classifier to new users and fine-tune only the rest. Our experiments with five datasets show up to 43% accuracy improvement and 66% training time reduction when compared to the baseline without using transfer learning. Furthermore, measurements on the Nvidia Jetson Xavier-NX hardware platform reveal that the power and energy consumption decrease by 43% and 68%, respectively, while achieving the same or higher accuracy as training from scratch.

An Energy-Aware Online Learning Framework for Resource Management in Heterogeneous Platforms

Mobile platforms must satisfy the contradictory requirements of fast response time and minimum energy consumption as a function of dynamically changing applications. To address this need, system-on-chips (SoC) that are at the heart of these devices provide a variety of control knobs, such as the number of active cores and their voltage/frequency levels. Controlling these knobs optimally at runtime is challenging for two reasons. First, the large configuration space prohibits exhaustive solutions. Second, control policies designed offline are at best sub-optimal since many potential new applications are unknown at design-time. We address these challenges by proposing an online imitation learning approach. Our key idea is to construct an offline policy and adapt it online to new applications to optimize a given metric (e.g., energy). The proposed methodology leverages the supervision enabled by power-performance models learned at runtime. We demonstrate its effectiveness on a commercial mobile platform with 16 diverse benchmarks. Our approach successfully adapts the control policy to an unknown application after executing less than 25% of its instructions.

Online Human Activity Recognition using Low-Power Wearable Devices

Human activity recognition~(HAR) has attracted significant research interest due to its applications in health monitoring and patient rehabilitation. Recent research on HAR focuses on using smartphones due to their widespread use. However, this leads to inconvenient use, limited choice of sensors and inefficient use of resources, since smartphones are not designed for HAR. This paper presents the first HAR framework that can perform both online training and inference. The proposed framework starts with a novel technique that generates features using the fast Fourier and discrete wavelet transforms of a textile-based stretch sensor and accelerometer. Using these features, we design an artificial neural network classifier which is trained online using the policy gradient algorithm. Experiments on a low power IoT device (TI-CC2650 MCU) with nine users show 97.7% accuracy in identifying six activities and their transitions with less than 12.5 mW power consumption.