Wire-feed laser additive manufacturing (WLAM) is gaining wide interest due to its high level of automation, high deposition rates, and good quality of printed parts. In-process monitoring and feedback controls that would reduce the uncertainty in the quality of the material are in the early stages of development. Machine learning promises the ability to accelerate the adoption of new processes and property design in additive manufacturing by making process-structure-property connections between process setting inputs and material quality outcomes. The molten pool dimensional information and temperature are the indicators for achieving the high quality of the build, which can be directly controlled by processing parameters. For the purpose of in situ quality control, the process parameters should be controlled in real-time based on sensed information from the process, in particular the molten pool. Thus, the molten pool-process relations are of preliminary importance. This paper analyzes experimentally collected in situ sensing data from the molten pool under a set of controlled process parameters in a WLAM system. The variations in the steady-state and transient state of the molten pool are presented with respect to the change of independent process parameters. A multi-modality convolutional neural network (CNN) architecture is proposed for predicting the control parameter directly from the measurable molten pool sensor data for achieving desired geometric and microstructural properties. Dropout and regularization are applied to the CNN architecture to avoid the problem of overfitting. The results highlighted that the multi-modal CNN, which receives temperature profile as an external feature to the features extracted from the image data, has improved prediction performance compared to the image-based uni-modality CNN approach.
The advancement of machine learning promises the ability to accelerate the adoption of new processes and property designs for metal additive manufacturing. The molten pool geometry and molten pool temperature are the significant indicators for the final part's geometric shape and microstructural properties for the Wire-feed laser direct energy deposition process. Thus, the molten pool condition-property relations are of preliminary importance for in situ quality assurance. To enable in situ quality monitoring of bead geometry and characterization properties, we need to continuously monitor the sensor's data for molten pool dimensions and temperature for the Wire-feed laser additive manufacturing (WLAM) system. We first develop a machine learning convolutional neural network (CNN) model for establishing the correlations from the measurable molten pool image and temperature data directly to the geometric shape and microstructural properties. The multi-modality network receives both the camera image and temperature measurement as inputs, yielding the corresponding characterization properties of the final build part (e.g., fusion zone depth, alpha lath thickness). The performance of the CNN model is compared with the regression model as a baseline. The developed models enable molten pool condition-quality relations mapping for building quantitative and collaborative in situ quality estimation and assurance framework.