3D-printed Soft Optical sensor with a Lens (SOLen) for light guidance in mechanosensing

Additive manufacturing is enabling soft robots with increasingly complex geometries, creating a demand for sensing solutions that remain compatible with single-material, one-step fabrication. Optical soft sensors are attractive for monolithic printing, but their performance is often degraded by uncontrolled light propagation (ambient coupling, leakage, scattering), while common miti- gation strategies typically require multimaterial interfaces. Here, we present an approach for 3D printed soft optical sensing (SOLen), in which a printed lens is placed in front of an emitter within a Y-shaped waveguide. The sensing mechanism relies on deformation-induced lens rotation and focal-spot translation, redistributing optical power between the two branches to generate a differential output that encodes both motion direction and amplitude. An acrylate polyurethane resin was modified with lauryl acrylate to improve compliance and optical transmittance, and single-layer optical characterization was used to derive wavelength-dependent refractive index and transmittance while minimizing DLP layer-related artifacts. The measured refractive index was used in simulations to design a lens profile for a target focal distance, which was then printed with sub-millimeter fidelity. Rotational tests demonstrated reproducible branch-selective signal switching over multiple cycles. These results establish a transferable material-to-optics workflow for soft optical sensors with lens with new functionalities for next-generation soft robots

Optically Sensorized Electro-Ribbon Actuator (OS-ERA)

Electro-Ribbon Actuators (ERAs) are lightweight flexural actuators that exhibit ultrahigh displacement and fast movement. However, their embedded sensing relies on capacitive sensors with limited precision, which hinders accurate control. We introduce OS-ERA, an optically sensorized ERA that yields reliable proprioceptive information, and we focus on the design and integration of a sensing solution without affecting actuation. To analyse the complex curvature of an ERA in motion, we design and embed two soft optical waveguide sensors. A classifier is trained to map the sensing signals in order to distinguish eight bending states. We validate our model on six held-out trials and compare it against signals' trajectories learned from training runs. Across all tests, the sensing output signals follow the training manifold, and the predicted sequence mirrors real performance and confirms repeatability. Despite deliberate train-test mismatches in actuation speed, the signal trajectories preserve their shape, and classification remains consistently accurate, demonstrating practical voltage- and speed-invariance. As a result, OS-ERA classifies bending states with high fidelity; it is fast and repeatable, solving a longstanding bottleneck of the ERA, enabling steps toward closed-loop control.