Decentralized Cooperative Localization for Multi-Robot Systems with Asynchronous Sensor Fusion

Decentralized cooperative localization (DCL) is a promising approach for nonholonomic mobile robots operating in GPS-denied environments with limited communication infrastructure. This paper presents a DCL framework in which each robot performs localization locally using an Extended Kalman Filter, while sharing measurement information during update stages only when communication links are available and companion robots are successfully detected by LiDAR. The framework preserves cross-correlation consistency among robot state estimates while handling asynchronous sensor data with heterogeneous sampling rates and accommodating accelerations during dynamic maneuvers. Unlike methods that require pre-aligned coordinate systems, the proposed approach allows robots to initialize with arbitrary reference-frame orientations and achieves automatic alignment through transformation matrices in both the prediction and update stages. To improve robustness in feature-sparse environments, we introduce a dual-landmark evaluation framework that exploits both static environmental features and mobile robots as dynamic landmarks. The proposed framework enables reliable detection and feature extraction during sharp turns, while prediction accuracy is improved through information sharing from mutual observations. Experimental results in both Gazebo simulation and real-world basement environments show that DCL outperforms centralized cooperative localization (CCL), achieving a 34% reduction in RMSE, while the dual-landmark variant yields an improvement of 56%. These results demonstrate the applicability of DCL to challenging domains such as enclosed spaces, underwater environments, and feature-sparse terrains where conventional localization methods are ineffective.

Unsupervised LiDAR-Based Multi-UAV Detection and Tracking Under Extreme Sparsity

Non-repetitive solid-state LiDAR scanning leads to an extremely sparse measurement regime for detecting airborne UAVs: a small quadrotor at 10-25 m typically produces only 1-2 returns per scan, which is far below the point densities assumed by most existing detection approaches and inadequate for robust multi-target data association. We introduce an unsupervised, LiDAR-only pipeline that addresses both detection and tracking without the need for labeled training data. The detector integrates range-adaptive DBSCAN clustering with a three-stage temporal consistency check and is benchmarked on real-world air-to-air flight data under eight different parameter configurations. The best setup attains 0.891 precision, 0.804 recall, and 0.63 m RMSE, and a systematic minPts sweep verifies that most scans contain at most 1-2 target points, directly quantifying the sparsity regime. For multi-target tracking, we compare deterministic Hungarian assignment with joint probabilistic data association (JPDA), each coupled with Interacting Multiple Model filtering, in four simulated scenarios with increasing levels of ambiguity. JPDA cuts identity switches by 64% with negligible impact on MOTA, demonstrating that probabilistic association is advantageous when UAV trajectories approach one another closely. A two-environment evaluation strategy, combining real-world detection with RTK-GPS ground truth and simulation-based tracking with identity-annotated ground truth, overcomes the limitations of GNSS-only evaluation at inter-UAV distances below 2 m.

Robust Cooperative Localization in Featureless Environments: A Comparative Study of DCL, StCL, CCL, CI, and Standard-CL

Cooperative localization (CL) enables accurate position estimation in multi-robot systems operating in GPS-denied environments. This paper presents a comparative study of five CL approaches: Centralized Cooperative Localization (CCL), Decentralized Cooperative Localization (DCL), Sequential Cooperative Localization (StCL), Covariance Intersection (CI), and Standard Cooperative Localization (Standard-CL). All methods are implemented in ROS and evaluated through Monte Carlo simulations under two conditions: weak data association and robust detection. Our analysis reveals fundamental trade-offs among the methods. StCL and Standard-CL achieve the lowest position errors but exhibit severe filter inconsistency, making them unsuitable for safety-critical applications. DCL demonstrates remarkable stability under challenging conditions due to its measurement stride mechanism, which provides implicit regularization against outliers. CI emerges as the most balanced approach, achieving near-optimal consistency while maintaining competitive accuracy. CCL provides theoretically optimal estimation but shows sensitivity to measurement outliers. These findings offer practical guidance for selecting CL algorithms based on application requirements.

Lightweight 3D LiDAR-Based UAV Tracking: An Adaptive Extended Kalman Filtering Approach

Accurate relative positioning is crucial for swarm aerial robotics, enabling coordinated flight and collision avoidance. Although vision-based tracking has been extensively studied, 3D LiDAR-based methods remain underutilized despite their robustness under varying lighting conditions. Existing systems often rely on bulky, power-intensive sensors, making them impractical for small UAVs with strict payload and energy constraints. This paper presents a lightweight LiDAR-based UAV tracking system incorporating an Adaptive Extended Kalman Filter (AEKF) framework. Our approach effectively addresses the challenges posed by sparse, noisy, and nonuniform point cloud data generated by non-repetitive scanning 3D LiDARs, ensuring reliable tracking while remaining suitable for small drones with strict payload constraints. Unlike conventional filtering techniques, the proposed method dynamically adjusts the noise covariance matrices using innovation and residual statistics, thereby enhancing tracking accuracy under real-world conditions. Additionally, a recovery mechanism ensures continuity of tracking during temporary detection failures caused by scattered LiDAR returns or occlusions. Experimental validation was performed using a Livox Mid-360 LiDAR mounted on a DJI F550 UAV in real-world flight scenarios. The proposed method demonstrated robust UAV tracking performance under sparse LiDAR returns and intermittent detections, consistently outperforming both standard Kalman filtering and particle filtering approaches during aggressive maneuvers. These results confirm that the framework enables reliable relative positioning in GPS-denied environments without the need for multi-sensor arrays or external infrastructure.