Multi-Modal Sensing and Fusion in mmWave Beamforming for Connected Vehicles: A Transformer Based Framework

Millimeter wave (mmWave) communication, utilizing beamforming techniques to address the inherent path loss limitation, is considered as one of the key technologies to support ever increasing high throughput and low latency demands of connected vehicles. However, adopting standard defined beamforming approach in highly dynamic vehicular environments often incurs high beam training overheads and reduction in the available airtime for communications, which is mainly due to exchanging pilot signals and exhaustive beam measurements. To this end, we present a multi-modal sensing and fusion learning framework as a potential alternative solution to reduce such overheads. In this framework, we first extract the representative features from the sensing modalities by modality specific encoders, then, utilize multi-head cross-modal attention to learn dependencies and correlations between different modalities, and subsequently fuse the multimodal features to obtain predicted top-k beams so that the best line-of-sight links can be proactively established. To show the generalizability of the proposed framework, we perform a comprehensive experiment in four different vehicle-to-infrastructure (V2I) and vehicle-to-vehicle (V2V) scenarios from real world multimodal and 60 GHz mmWave wireless sensing data. The experiment reveals that the proposed framework (i) achieves up to 96.72% accuracy on predicting top-15 beams correctly, (ii) incurs roughly 0.77 dB average power loss, and (iii) improves the overall latency and beam searching space overheads by 86.81% and 76.56% respectively for top-15 beams compared to standard defined approach.

Multi-Modality Sensing in mmWave Beamforming for Connected Vehicles Using Deep Learning

Beamforming techniques are considered as essential parts to compensate severe path losses in millimeter-wave (mmWave) communications. In particular, these techniques adopt large antenna arrays and formulate narrow beams to obtain satisfactory received powers. However, performing accurate beam alignment over narrow beams for efficient link configuration by traditional standard defined beam selection approaches, which mainly rely on channel state information and beam sweeping through exhaustive searching, imposes computational and communications overheads. And, such resulting overheads limit their potential use in vehicle-to-infrastructure (V2I) and vehicle-to-vehicle (V2V) communications involving highly dynamic scenarios. In comparison, utilizing out-of-band contextual information, such as sensing data obtained from sensor devices, provides a better alternative to reduce overheads. This paper presents a deep learning-based solution for utilizing the multi-modality sensing data for predicting the optimal beams having sufficient mmWave received powers so that the best V2I and V2V line-of-sight links can be ensured proactively. The proposed solution has been tested on real-world measured mmWave sensing and communication data, and the results show that it can achieve up to 98.19% accuracies while predicting top-13 beams. Correspondingly, when compared to existing been sweeping approach, the beam sweeping searching space and time overheads are greatly shortened roughly by 79.67% and 91.89%, respectively which confirm a promising solution for beamforming in mmWave enabled communications.