Exp-Force: Experience-Conditioned Pre-Grasp Force Selection with Vision-Language Models

Accurate pre-contact grasp force selection is critical for safe and reliable robotic manipulation. Adaptive controllers regulate force after contact but still require a reasonable initial estimate. Starting a grasp with too little force requires reactive adjustment, while starting a grasp with too high a force risks damaging fragile objects. This trade-off is particularly challenging for compliant grippers, whose contact mechanics are difficult to model analytically. We propose Exp-Force, an experience-conditioned framework that predicts the minimum feasible grasping force from a single RGB image. The method retrieves a small set of relevant prior grasping experiences and conditions a vision-language model on these examples for in-context inference, without analytic contact models or manually designed heuristics. On 129 object instances, ExpForce achieves a best-case MAE of 0.43 N, reducing error by 72% over zero-shot inference. In real-world tests on 30 unseen objects, it improves appropriate force selection rate from 63% to 87%. These results demonstrate that Exp-Force enables reliable and generalizable pre-grasp force selection by leveraging prior interaction experiences. http://expforcesubmission.github.io/Exp-Force-Website/

High-Fidelity, Customizable Force Sensing for the Wearable Human-Robot Interface

Mechanically characterizing the human-machine interface is essential to understanding user behavior and optimizing wearable robot performance. This interface has been challenging to sensorize due to manufacturing complexity and non-linear sensor responses. Here, we measure human limb-device interaction via fluidic innervation, creating a 3D-printed silicone pad with embedded air channels to measure forces. As forces are applied to the pad, the air channels compress, resulting in a pressure change measurable by off-the-shelf pressure transducers. We demonstrate in benchtop testing that pad pressure is highly linearly related to applied force ($R^2 = 0.998$). This is confirmed with clinical dynamometer correlations with isometric knee torque, where above-knee pressure was highly correlated with flexion torque ($R^2 = 0.95$), while below-knee pressure was highly correlated with extension torque ($R^2 = 0.75$). We build on these idealized settings to test pad performance in more unconstrained settings. We place the pad over \textit{biceps brachii} during cyclic curls and stepwise isometric holds, observing a correlation between pressure and elbow angle. Finally, we integrated the sensor into the strap of a lower-extremity robotic exoskeleton and recorded pad pressure during repeated squats with the device unpowered. Pad pressure tracked squat phase and overall task dynamics consistently. Overall, our preliminary results suggest fluidic innervation is a readily customizable sensing modality with high signal-to-noise ratio and temporal resolution for capturing human-machine mechanical interaction. In the long-term, this modality may provide an alternative real-time sensing input to control / optimize wearable robotic systems and to capture user function during device use.

BiFlex: A Passive Bimodal Stiffness Flexible Wrist for Manipulation in Unstructured Environments

Robotic manipulation in unstructured, humancentric environments poses a dual challenge: achieving the precision need for delicate free-space operation while ensuring safety during unexpected contact events. Traditional wrists struggle to balance these demands, often relying on complex control schemes or complicated mechanical designs to mitigate potential damage from force overload. In response, we present BiFlex, a flexible robotic wrist that uses a soft buckling honeycomb structure to provides a natural bimodal stiffness response. The higher stiffness mode enables precise household object manipulation, while the lower stiffness mode provides the compliance needed to adapt to external forces. We design BiFlex to maintain a fingertip deflection of less than 1 cm while supporting loads up to 500g and create a BiFlex wrist for many grippers, including Panda, Robotiq, and BaRiFlex. We validate BiFlex under several real-world experimental evaluations, including surface wiping, precise pick-and-place, and grasping under environmental constraints. We demonstrate that BiFlex simplifies control while maintaining precise object manipulation and enhanced safety in real-world applications.