Multi-stage robust nonlinear model predictive control of a lower-limb exoskeleton robot

The use of exoskeleton robots is increasing due to the rising number of musculoskeletal injuries. However, their effectiveness depends heavily on the design of control systems. Designing robust controllers is challenging because of uncertainties in human-robot systems. Among various control strategies, Model Predictive Control (MPC) is a powerful approach due to its ability to handle constraints and optimize performance. Previous studies have used linearization-based methods to implement robust MPC on exoskeletons, but these can degrade performance due to nonlinearities in the robot's dynamics. To address this gap, this paper proposes a Robust Nonlinear Model Predictive Control (RNMPC) method, called multi-stage NMPC, to control a two-degree-of-freedom exoskeleton by solving a nonlinear optimization problem. This method uses multiple scenarios to represent system uncertainties. The study focuses on minimizing human-robot interaction forces during the swing phase, particularly when the robot carries unknown loads. Simulations and experimental tests show that the proposed method significantly improves robustness, outperforming non-robust NMPC. It achieves lower tracking errors and interaction forces under various uncertainties. For instance, when a 2 kg unknown payload is combined with external disturbances, the RMS values of thigh and shank interaction forces for multi-stage NMPC are reduced by 77 and 94 percent, respectively, compared to non-robust NMPC.

Using an Improved Output Feedback MPC Approach for Developing a Haptic Virtual Training System

Haptic training simulators generally consist of three major components, namely a human operator, a haptic interface, and a virtual environment. Appropriate dynamic modeling of each of these components can have far-reaching implications for the whole system's performance improvement in terms of transparency, the analogy to the real environment, and stability. In this paper, we developed a virtual-based haptic training simulator for Endoscopic Sinus Surgery (ESS) by doing a dynamic characterization of the phenomenological sinus tissue fracture in the virtual environment, using an input-constrained linear parametric variable model. A parallel robot manipulator equipped with a calibrated force sensor is employed as a haptic interface. A lumped five-parameter single-degree-of-freedom mass-stiffness-damping impedance model is assigned to the operator's arm dynamic. A robust online output feedback quasi-min-max model predictive control (MPC) framework is proposed to stabilize the system during the switching between the piecewise linear dynamics of the virtual environment. The simulations and the experimental results demonstrate the effectiveness of the proposed control algorithm in terms of robustness and convergence to the desired impedance quantities.