The ubiquitous use of sensing and signal processing is increasing exponentially with the advance of the Internet of Everything (IoE). In this context, the design of every time more power efficient sensor nodes is a must. Within these nodes, one of the most power-hungry components are the analog-to-digital converters (ADC). These components are used everywhere to translate real-world analog signals into computer intelligible digital signals. One of the promising architecture for the sensing of physiological signals is the level crossing ADC due to the sparse characteristics of those signals. One of the challenges to improve the power efficiency of this type of ADC lies in the use of continuous comparators to keep track of the input signal within the voltage references. The aim of this work is to investigate the impact of using continuous comparator which can be turned off without incurring error to the conversion of the level crossing ADC. New boundaries will be set for the correct behavior of the level crossing ADC together with the conditions for power saving with the proposed architecture. A 1V 5-bits level crossing ADC was implemented using the TSMC 0.18um process and fabricated for laboratory measurements. The ADC consumes 12.2uW during tracking state and with the proposed technique, the reduction of the average power can go from 4.2% to 45.5% depending on the activity and the type of the input signal.