Low-cost IoT-Based Rainfall Monitoring with Web-Based Data Access

Rainfall measurement with high spatial and temporal resolution is critical for flood forecasting, drought mitigation, and disaster preparedness. Rainfall patterns are highly variable, both geographically and over time. This variability presents a significant challenge for monitoring, as rain gauges can accurately capture temporal patterns only at a single location. Furthermore, the high cost of commercial instruments restricts their widespread deployment, and rain gauge networks often fail to adequately capture the spatial heterogeneity of precipitation patterns. To address these limitations, this study introduces a low-cost IoT-based rainfall monitoring system developed upon the Low-cost Efficient Wireless Intelligent Sensor (LEWIS) platform. Four rainfall sensors were designed, developed, and deployed at different locations across the semi-arid region of the United States, in the State of New Mexico, to capture localized precipitation variability. Each sensor node integrates a rainfall detection module with an LTE-enabled microcontroller and is powered by a compact solar-battery system, ensuring autonomous and self-sufficient operation. Real-time precipitation data are transmitted to a cloud server for continuous access, visualization, and integration with early-warning frameworks. The results demonstrate that IoT-based rainfall monitoring can achieve reliable accuracy at a fraction of the cost of conventional gauges, while supporting dense deployment for microscale precipitation analysis. Comparative validation with model-based precipitation data and in situ observations shows strong agreement in the detection and timing of recorded precipitation events, highlighting the system potential for early warning, disaster risk reduction, and bias correction of remotely sensed precipitation products by filling observational gaps in under-instrumented semi-arid areas.

Feedback and Control of Dynamics and Robotics using Augmented Reality

Human-machine interaction (HMI) and human-robot interaction (HRI) can assist structural monitoring and structural dynamics testing in the laboratory and field. In vibratory experimentation, one mode of generating vibration is to use electrodynamic exciters. Manual control is a common way of setting the input of the exciter by the operator. To measure the structural responses to these generated vibrations sensors are attached to the structure. These sensors can be deployed by repeatable robots with high endurance, which require on-the-fly control. If the interface between operators and the controls was augmented, then operators can visualize the experiments, exciter levels, and define robot input with a better awareness of the area of interest. Robots can provide better aid to humans if intelligent on-the-fly control of the robot is: (1) quantified and presented to the human; (2) conducted in real-time for human feedback informed by data. Information provided by the new interface would be used to change the control input based on their understanding of real-time parameters. This research proposes using Augmented Reality (AR) applications to provide humans with sensor feedback and control of actuators and robots. This method improves cognition by allowing the operator to maintain awareness of structures while adjusting conditions accordingly with the assistance of the new real-time interface. One interface application is developed to plot sensor data in addition to voltage, frequency, and duration controls for vibration generation. Two more applications are developed under similar framework, one to control the position of a mediating robot and one to control the frequency of the robot movement. This paper presents the proposed model for the new control loop and then compares the new approach with a traditional method by measuring time delay in control input and user efficiency.