Connecting Meteorite Spectra to Lunar Surface Composition Using Hyperspectral Imaging and Machine Learning

We present an innovative, cost-effective framework integrating laboratory Hyperspectral Imaging (HSI) of the Bechar010 Lunar meteorite with ground-based lunar HSI and supervised Machine Learning(ML) to generate high-fidelity mineralogical maps. A 3mm thin section of Bechar010 was imaged under a microscope with a 30mm focal length lens at 150mm working distance, using 6x binning to increase the signal-to-noise ratio, producing a data cube (X $\times$ Y $\times$ $λ$ = $791 \times 1024 \times 224$, 0.24mm $\times$ 0.2mm resolution) across 400-1000}nm (224 bands, 2.7nm spectral sampling, 5.5nm full width at half maximum spectral resolution) using a Specim FX10 camera. Ground-based lunar HSI was captured with a Celestron 8SE telescope (3km/pixel), yielded a data cube ($371 \times 1024 \times 224$). Solar calibration was performed using a Spectralon reference ({99}\% reflectance {<2}\% error) ensured accurate reflectance spectra. A Support Vector Machine (SVM) with a radial basis function kernel, trained on expert-labeled spectra, achieved {93.7}\% classification accuracy(5-fold cross-validation) for olivine ({92}\% precision, {90}\% recall) and pyroxene ({88}\% precision, {86}{\%} recall) in Bechar 010. LIME analysis identified key wavelengths (e.g., 485nm, {22.4}\% for M3; 715nm, {20.6}\% for M6) across 10 pre-selected regions (M1 to M10), indicating olivine-rich (Highland-like) and pyroxene-rich (Mare-like) compositions. SAM analysis revealed angles from 0.26 radian to 0.66 radian, linking M3 and M9 to Highlands and M6 and M10 to Mares. K-means clustering of Lunar data identified 10 mineralogical clusters ({88}\% accuracy), validated against Chandrayaan-1 Moon mineralogy Mapper ($\rm M^3$) data (140m/pixel, 10nm spectral resolution).A novel push-broom HSI approach with a telescope achieves 0.8 arcsec resolution for lunar spectroscopy, inspiring full-sky multi-object spectral mapping.

Using Machine Learning for Lunar Mineralogy-I: Hyperspectral Imaging of Volcanic Samples

This study examines the mineral composition of volcanic samples similar to lunar materials, focusing on olivine and pyroxene. Using hyperspectral imaging from 400 to 1000 nm, we created data cubes to analyze the reflectance characteristics of samples from samples from Vulcano, a volcanically active island in the Aeolian Archipelago, north of Sicily, Italy, categorizing them into nine regions of interest and analyzing spectral data for each. We applied various unsupervised clustering algorithms, including K-Means, Hierarchical Clustering, GMM, and Spectral Clustering, to classify the spectral profiles. Principal Component Analysis revealed distinct spectral signatures associated with specific minerals, facilitating precise identification. Clustering performance varied by region, with K-Means achieving the highest silhouette-score of 0.47, whereas GMM performed poorly with a score of only 0.25. Non-negative Matrix Factorization aided in identifying similarities among clusters across different methods and reference spectra for olivine and pyroxene. Hierarchical clustering emerged as the most reliable technique, achieving a 94\% similarity with the olivine spectrum in one sample, whereas GMM exhibited notable variability. Overall, the analysis indicated that both Hierarchical and K-Means methods yielded lower errors in total measurements, with K-Means demonstrating superior performance in estimated dispersion and clustering. Additionally, GMM showed a higher root mean square error compared to the other models. The RMSE analysis confirmed K-Means as the most consistent algorithm across all samples, suggesting a predominance of olivine in the Vulcano region relative to pyroxene. This predominance is likely linked to historical formation conditions similar to volcanic processes on the Moon, where olivine-rich compositions are common in ancient lava flows and impact melt rocks.