Multi-UAV Enabled Integrated Sensing and Wireless Powered Communication: A Robust Multi-Objective Approach

In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where multiple unmanned aerial vehicle (UAV)-based radars serve multiple clusters of energy-limited communication users in addition to their sensing functionality. In this architecture, the radars sense the environment in phase 1 (namely sensing phase) and meanwhile, the communications users (nodes) harvest and store the energy from the radar transmit signals. The stored energy is then used for information transmission from the nodes to UAVs in phase 2, i.e., uplink phase. Performance of the radar systems depends on the transmit signals as well as the receive filters; the energy of the transmit signals also affects the communication network because it serves as the source of uplink powers. Therefore, we cast a multi-objective design problem addressing performance of both radar and communication systems via optimizing UAV trajectories, radar transmit waveforms, radar receive filters, time scheduling and uplink powers. The design problem is further formulated as a robust non-convex optimization problem taking into account the the user location uncertainty. Hence, we devise a method based on alternating optimization followed by concepts of fractional programming, S-procedure, and tricky majorization-minimization (MM) technique to tackle it. Numerical examples illustrate the effectiveness of the proposed method for different scenarios.

A Learning-Inspired Strategy to Design Binary Sequences with Good Correlation Properties: SISO and MIMO Radar Systems

In this paper, the design of binary sequences exhibiting low values of aperiodic/periodic correlation functions, in terms of Integrated Sidelobe Level (ISL), is pursued via a learning-inspired method. Specifcally, the synthesis of either a single or a burst of codes is addressed, with reference to both Single-Input Single-Output (SISO) and Multiple-Input Multiple-Output (MIMO) radar systems. Two optimization machines, referred to as two-layer and single-layer Binary Sequence Correlation Network (BiSCorN), able to learn actions to design binary sequences with small ISL/Complementary ISL (CISL) for SISO and MIMO systems are proposed. These two networks differ in terms of the capability to synthesize Low-Correlation-Zone (LCZ) sequences and computational cost. Numerical experiments show that proposed techniques can outperform state-of-the-art algorithms for the design of binary sequences and Complementary Sets of Sequences (CSS) in terms of ISL and, interestingly, of Peak Sidelobe Level (PSL).

Design of a Multi-User Wireless Powered Communication System Employing Either Active IRS or AF Relay

In this paper, we optimize a Wireless Powered Communication (WPC) system including multiple pair of users, where transmitters employ single-antenna to transmit their information and power to their receivers with the help of one multiple-antennas Amplify-and-Forward (AF) relay or an active Intelligent Reflecting Surface (IRS). We propose a joint Time Switching (TS) scheme in which transmitters, receivers, and the relay/IRS are either in their energy or information transmission/reception modes. The transmitted multi-carrier unmodulated and modulated waveforms are used for Energy Harvesting (EH) and Information Decoding (ID) modes, respectively. In order to design an optimal fair system, we maximize the minimum rate of all pairs for both relay and IRS systems through a unified framework. This framework allows us to simultaneously design energy waveforms, find optimal relay/IRS amplification/reflection matrices, allocate powers for information waveforms, and allocate time durations for various phases. In addition, we take into account the non-linearity of the EH circuits in our problem. This problem turns out to be non-convex. Thus, we propose an iterative algorithm by using the Minorization-Maximization (MM) technique, which quickly converges to the optimal solution. Numerical examples show that the proposed method improves the performance of the multi-pair WPC relay/IRS system under various setups.