Deep Learning-Enabled Dissolved Oxygen Sensing in Biofouling Environments for Ocean Monitoring

The escalating climate crisis and ecosystem degradation demand intelligent, low-cost sensors capable of robust, long-term monitoring in real-world environments. Absolute dissolved oxygen (DO) concentration is a key parameter for predicting climate tipping points. Inexpensive optoelectronic sensors based on microstructured polymer films doped with phosphorescent dyes could be readily deployable; however, signal drift and marine biofouling remain major challenges. Here, we introduce a sensing paradigm that combines camera-based DO sensors with a visual transformer (ViT)-based physics-informed neural network (PINN) for high-fidelity sensing under biofouling conditions. Training and testing data were obtained from an algae-laden water tank over 14 days to capture accelerated biofouling. The ViT-PINN, which embeds the Stern-Volmer (SV) equation into the loss function, reduces mean average error (MAE) by 92% and 89% compared to classical statistical and ML approaches, achieving ~2 umol/L absolute error. A deep ensemble further quantifies predictive uncertainty, enabling self-diagnostic sensing.

Neural Network Kalman filtering for 3D object tracking from linear array ultrasound data

Many interventional surgical procedures rely on medical imaging to visualise and track instruments. Such imaging methods not only need to be real-time capable, but also provide accurate and robust positional information. In ultrasound applications, typically only two-dimensional data from a linear array are available, and as such obtaining accurate positional estimation in three dimensions is non-trivial. In this work, we first train a neural network, using realistic synthetic training data, to estimate the out-of-plane offset of an object with the associated axial aberration in the reconstructed ultrasound image. The obtained estimate is then combined with a Kalman filtering approach that utilises positioning estimates obtained in previous time-frames to improve localisation robustness and reduce the impact of measurement noise. The accuracy of the proposed method is evaluated using simulations, and its practical applicability is demonstrated on experimental data obtained using a novel optical ultrasound imaging setup. Accurate and robust positional information is provided in real-time. Axial and lateral coordinates for out-of-plane objects are estimated with a mean error of 0.1mm for simulated data and a mean error of 0.2mm for experimental data. Three-dimensional localisation is most accurate for elevational distances larger than 1mm, with a maximum distance of 5mm considered for a 25mm aperture.