Bootstrap-Based Receiver Synchronization and System Discovery in B2X: An Extension of ATSC 3.0

Addressing the increasing and diversified demands of multicast and broadcast services require highly efficient multicast and broadcast technologies. Broadcast networks, such as Advanced Television Systems Committee 3.0 (ATSC 3.0), are inherently designed to support these services and continue to evolve to meet growing performance and scalability requirements. At the same time, smartphones are increasingly used for video streaming and other high-volume services, placing growing pressure on mobile network capacity. Interworking between broadcast and mobile networks is therefore an important enabler for efficient and seamless service delivery. In this context, Broadcast-to-Everything (B2X) extends ATSC 3.0 to support enhanced interoperability with Third Generation Partnership Project (3GPP) mobile systems while maintaining low cross-correlation with ATSC 3.0 bootstrap signals, supporting reliable system identification in scenarios where multiple waveforms may be present. Bootstrap signaling, which enables initial signal detection and synchronization, is a key feature of ATSC-based waveform discovery and synchronization, and B2X further extends this capability through a scalable bootstrap framework supporting a range of bandwidth configurations. This paper investigates system discovery through bootstrap signal detection at the B2X receiver and presents key design-related findings, including parameter selection and cross-testing with ATSC 3.0. We present extensive simulations of the receiver performance under diverse propagation and mobility conditions, ranging from stationary to high-speed scenarios. The results demonstrate the robustness of the B2X bootstrap signaling design across a broad range of channel conditions relevant to multicast and broadcast operation.