Many kinds of lower-limb exoskeletons were developed for walking assistance. However, time-delay arised from the computation time and the communication delays is still a general problem when controlling these exoskeletons. In this research, we proposed a novel method to prevent the time-delay when controlling a walking assist exoskeleton by predicting future plantar force and walking status. By using Long Short-term Memory (LSTM) and fully-connected network, the plantar force can be predicted only from the data measured from inertial measurement unit (IMU) sensors, not only during the periodic walking but also when the start and end of walking. The walking status and the desired assisting timing can also be detected from the predicted plantar force. By sending the control command beforehand with considering the time-delay, the exoskeleton can be moved right on the desired assisting timing. In the experiments, the prediction errors of the plantar force and the assisting timing are confirmed. The performance of the proposed method is also evaluated by controlling the exoskeleton using the trained model.