This paper establishes a multi-scattering point chest wall motion model by combining the human respiration signal (RS) and HS (HS) measured by radar. An algorithmic process is designed based on the model to accurately separate the human respiration and heartbeat motion. Firstly, a human maximum motion velocity constraint method is proposed to correct human chest wall tracking, determine the radial position of the chest wall relative to the radar, and extract the phase signal corresponding to the chest wall motion. Then an improved time-difference method is proposed to suppress the interference of RS harmonics on HS and the interference of low-frequency noise on RS. Finally, an adaptive Gaussian weighting filter is designed to extract the RS with less distortion from the phase signal. A low-order finite-length unit impulse response (FIR) filter is used to extract the HS with less distortion from the phase signal. To verify the effectiveness of the proposed algorithm, simulating the process of measuring the RS and HS of the chest wall motion model by radar. The simulation results show that, ideally, the radar measurement results of the RS and HS are less distorted relative to the actual values. In addition, we used a millimeter-wave experimental radar system in the 60 GHz band to measure the respiration rate (RR) and HR (HR) of two subjects. The experimental results showed that the measured RR and HR correlated well with the actual values. The quantitative analysis of simulation results and experimental results show that the proposed method can achieve accurate and robust measurement of RS and HS.
Morphable models are essential for the statistical modeling of 3D faces. Previous works on morphable models mostly focus on large-scale facial geometry but ignore facial details. This paper augments morphable models in representing facial details by learning a Structure-aware Editable Morphable Model (SEMM). SEMM introduces a detail structure representation based on the distance field of wrinkle lines, jointly modeled with detail displacements to establish better correspondences and enable intuitive manipulation of wrinkle structure. Besides, SEMM introduces two transformation modules to translate expression blendshape weights and age values into changes in latent space, allowing effective semantic detail editing while maintaining identity. Extensive experiments demonstrate that the proposed model compactly represents facial details, outperforms previous methods in expression animation qualitatively and quantitatively, and achieves effective age editing and wrinkle line editing of facial details. Code and model are available at https://github.com/gerwang/facial-detail-manipulation.
Convex model predictive controls (MPCs) with a single rigid body model have demonstrated strong performance on real legged robots. However, convex MPCs are limited by their assumptions such as small rotation angle and pre-defined gait, limiting the richness of potential solutions. We remove those assumptions and solve the complete mixed-integer non-convex programming with single rigid body model. We first collect datasets of pre-solved problems offline, then learn the problem-solution map to solve this optimization fast for MPC. If warm-starts can be found, offline problems can be solved close to the global optimality. The proposed controller is tested by generating various gaits and behaviors depending on the initial conditions. Hardware test demonstrates online gait generation and adaptation running at more than 50 Hz based on sensor feedback.
Although significant progress has been made to audio-driven talking face generation, existing methods either neglect facial emotion or cannot be applied to arbitrary subjects. In this paper, we propose the Emotion-Aware Motion Model (EAMM) to generate one-shot emotional talking faces by involving an emotion source video. Specifically, we first propose an Audio2Facial-Dynamics module, which renders talking faces from audio-driven unsupervised zero- and first-order key-points motion. Then through exploring the motion model's properties, we further propose an Implicit Emotion Displacement Learner to represent emotion-related facial dynamics as linearly additive displacements to the previously acquired motion representations. Comprehensive experiments demonstrate that by incorporating the results from both modules, our method can generate satisfactory talking face results on arbitrary subjects with realistic emotion patterns.
Forward modeling of wave scattering and radar imaging mechanisms is the key to information extraction from synthetic aperture radar (SAR) images. Like inverse graphics in optical domain, an inherently-integrated forward-inverse approach would be promising for SAR advanced information retrieval and target reconstruction. This paper presents such an attempt to the inverse graphics for SAR imagery. A differentiable SAR renderer (DSR) is developed which reformulates the mapping and projection algorithm of SAR imaging mechanism in the differentiable form of probability maps. First-order gradients of the proposed DSR are then analytically derived which can be back-propagated from rendered image/silhouette to the target geometry and scattering attributes. A 3D inverse target reconstruction algorithm from SAR images is devised. Several simulation and reconstruction experiments are conducted, including targets with and without background, using both synthesized data or real measured inverse SAR (ISAR) data by ground radar. Results demonstrate the efficacy of the proposed DSR and its inverse approach.
Graph neural networks (GNNs) have been widely used in many real applications, and recent studies have revealed their vulnerabilities against topology attacks. To address this issue, existing efforts have mainly been dedicated to improving the robustness of GNNs, while little attention has been paid to the detection of such attacks. In this work, we study the victim node detection problem under topology attacks against GNNs. Our approach is built upon the key observation rooted in the intrinsic message passing nature of GNNs. That is, the neighborhood of a victim node tends to have two competing group forces, pushing the node classification results towards the original label and the targeted label, respectively. Based on this observation, we propose to detect victim nodes by deliberately designing an effective measurement of the neighborhood variance for each node. Extensive experimental results on four real-world datasets and five existing topology attacks show the effectiveness and efficiency of the proposed detection approach.
The evaluation of human epidermal growth factor receptor 2 (HER2) expression is essential to formulate a precise treatment for breast cancer. The routine evaluation of HER2 is conducted with immunohistochemical techniques (IHC), which is very expensive. Therefore, for the first time, we propose a breast cancer immunohistochemical (BCI) benchmark attempting to synthesize IHC data directly with the paired hematoxylin and eosin (HE) stained images. The dataset contains 4870 registered image pairs, covering a variety of HER2 expression levels. Based on BCI, as a minor contribution, we further build a pyramid pix2pix image generation method, which achieves better HE to IHC translation results than the other current popular algorithms. Extensive experiments demonstrate that BCI poses new challenges to the existing image translation research. Besides, BCI also opens the door for future pathology studies in HER2 expression evaluation based on the synthesized IHC images. BCI dataset can be downloaded from https://bupt-ai-cz.github.io/BCI.
In portraits, eyeglasses may occlude facial regions and generate cast shadows on faces, which degrades the performance of many techniques like face verification and expression recognition. Portrait eyeglasses removal is critical in handling these problems. However, completely removing the eyeglasses is challenging because the lighting effects (e.g., cast shadows) caused by them are often complex. In this paper, we propose a novel framework to remove eyeglasses as well as their cast shadows from face images. The method works in a detect-then-remove manner, in which eyeglasses and cast shadows are both detected and then removed from images. Due to the lack of paired data for supervised training, we present a new synthetic portrait dataset with both intermediate and final supervisions for both the detection and removal tasks. Furthermore, we apply a cross-domain technique to fill the gap between the synthetic and real data. To the best of our knowledge, the proposed technique is the first to remove eyeglasses and their cast shadows simultaneously. The code and synthetic dataset are available at https://github.com/StoryMY/take-off-eyeglasses.
RGBD-based real-time dynamic 3D reconstruction suffers from inaccurate inter-frame motion estimation as errors may accumulate with online tracking. This problem is even more severe for single-view-based systems due to strong occlusions. Based on these observations, we propose OcclusionFusion, a novel method to calculate occlusion-aware 3D motion to guide the reconstruction. In our technique, the motion of visible regions is first estimated and combined with temporal information to infer the motion of the occluded regions through an LSTM-involved graph neural network. Furthermore, our method computes the confidence of the estimated motion by modeling the network output with a probabilistic model, which alleviates untrustworthy motions and enables robust tracking. Experimental results on public datasets and our own recorded data show that our technique outperforms existing single-view-based real-time methods by a large margin. With the reduction of the motion errors, the proposed technique can handle long and challenging motion sequences. Please check out the project page for sequence results: https://wenbin-lin.github.io/OcclusionFusion.